Kompresorska enota

Bitzer CO2

Stanje: rabljeno, Komplet kompresorjev Bitzer -Tip: 4FTC-20KI-40S (x3), 2HHC-2K-40S (x1), 2KHC-05K0-40S (x1) -Pretok: 17,8 m3/h (x3), 4,34 m3/h (x3), 2,71 m3/h (x3) Gsdpfx Aex Rp R Tegwjip -Krmilna omarica vključena -Dimenzije: 2950 x 950 x 1950 mm -Dimenzije omare: 2050 x 1200 mm -Hladilno sredstvo: CO2 -Stanje zaloge: 1 kos -Skladiščna številka: Z121 -Stanje: Rabljeno, zelo dobro, preizkušeno, pripravljeno za uporabo

Stanje: rabljeno, Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, compressor, motor compressor, cooling machine, cooling unit Gisdpfxeif Huno Agwop - Manufacturer: Dorin, complete refrigeration compressor cooling unit - Model: UA - K470CS-01 - Power: 3.48 kW / 1450 rpm - Displacement: 23.37 m³/h - Max. allowable pressure: 30.5 bar - Quantity: 2x cooling units available - Price: per unit - Dimensions (overall): 1900/1000/H940 mm - Weight: 304 kg/unit

Stanje: dober (rabljeno), Leto izdelave: 2021, hladilna zmogljivost: 25 kW (33,99 KM), CO2 installation & cold room in good condition, year of manufacture 2021. Cold room temperature approx. +4°C and an evaporation temperature of -8°C. The system includes the following: One cold storage room with a panel thickness of 100 mm and an insulation value of RC 5.21. The cold room is equipped with an electric sliding door and three Bachara MGS 450/CO2 gas detectors—one for the machine unit and two inside the cold room. The cold room temperature is approximately +4°C. Internal dimensions: 24,800 x 7,800 x 2,900 mm (L x W x H) External dimensions: 25,000 x 8,000 x 3,100 mm (L x W x H) Sliding door dimensions: 2,500 x 2,500 mm (W x H) Gijdpfxorz R Are Agwsp Cold storage surface area: 194 m² Cold storage volume: 600 m³ Advansor MiniBooster 2x1 unit complete with one low temperature Bitzer 2HSL-3K-40S & two medium temperature Bitzer 4KTE-10K-40S semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid receiver, two Danfoss VLT drives, and a Danfoss MMI control display. Dimensions: 1,000 x 800 x 2,200 mm (L x W x H), weight: 820 kg. The low-temperature circuit is not used in the current configuration, but the option is available. Delta FMT-7028 (x4) evaporators with a capacity of 6.3 kW each. Each evaporator has two fans with a blade diameter of 350 mm and an airflow of 3,000 m³/h. Dimensions: 1,370 x 470 x 465 mm (L x W x H). Eco KCE62M6V.4314 gas cooler with two EBM-Papst A3G630-AR85-90 fans – 50/60 Hz – 0.97 kW – 1,140 RPM – diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information! Specifications Brand: Bitzer Type: CO2 system & cold room Refrigerant: CO2 Capacity: 25 kW (-5ºC/+40ºC) Year of manufacture: 2021

Stanje: rabljeno, The unit is in perfect condition and also includes: 1. Teko ROXSTA 2.0 compressor package, equipped with 4 Bitzer 4DTC-25K-40P CO2 compressors and 1 Bitzer 4FTE-20K-40S CO2 compressor, complete with the original control cabinet -Compressor types: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) -Displacement: 21.2 m³/h (x4), 17.5 m³/h (x1) -Refrigeration capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C -Overall dimensions (compressor pack): 3300 x 950 x 2200 mm -Control cabinet dimensions: 1350 x 950 x 2000 mm -Year of manufacture: 2018 2. Evaporators – 5 units Guntner S-DHN 051C/24, dual flow, all stainless steel (housing and block) -Type: S-DHN 051C/24 -Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 -Surface area: 101.9 m² -Airflow: 11,240 m³/h -Fin spacing: 4 mm -Fans: 2 x 510 mm -Dimensions: 2550 x 1560 x 480 mm -Stainless steel housing and block -Year of manufacture: 2019 -Capacity: 25.7 l -Weight: 149 kg -Quantity: 5 units 3. Evaporators – 3 units Guntner S-CXDHN 046C/37, dual flow, all stainless steel (housing and block) -Type: S-CXDHN 046C/37 -Cooling capacity: 21.9 kW at DT8, 17.7 kW at DT7 -Fin spacing: 7 mm -Fans: 3 x 460 mm -Dimensions: 2950 x 1560 x 480 mm -Stainless steel housing and block -Year of manufacture: 2021 -Capacity: 29.9 l -Quantity: 3 units 4. Evaporator – 1 unit Guntner S-CXDHN 046C/37, dual flow -Type: GADC CX 035.1/41M/HEC7E.TNNN -Fin spacing: 7 mm -Fans: 4 x 350 mm Gjdjxpvtcspfx Agwsip -Dimensions: 3150 x 1000 x 300 mm -Electric heaters -Year of manufacture: 2024 -Capacity: 14.2 l -Quantity: 1 unit 5. Evaporators – 4 units Guntner GACC CX 040.1/3-70.E-1845718M -Type: GACC CX 040.1/3-70.E-1845718M -Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 -Heat exchanger surface area: 63.3 m² -Airflow: 8,640 m³/h -Fin spacing: 7 mm -Fans: 3 x 400 mm -Dimensions: 2370 x 550 x 580 mm -Electric heaters -Year of manufacture: 2019 -Capacity: 11.1 l -Weight: 114 kg -Quantity: 4 units 6. Guntner GVD080.4C/2x3-EK.E V-type condenser -Type: GVD080.4C/2x3-EK.E -Year of manufacture: 2018 -Capacity: 60.2 l -Fans: 6 x 800 mm, 490 rpm, with frequency converter -Dimensions: 4500 x 2320 x 2850 mm

Stanje: novo, Lead and Feed Screw Lathe Bernardo Standard 165 D Technical Specifications Centre Distance: 1000 mm Centre Height: 175 mm Swing over Bed: 350 mm Swing over Gap*: 450 mm Swing over Cross Slide: 190 mm Bed Width: 180 mm Spindle Bore: 40 mm Spindle Mount: DIN 55029, D1-4 Gjdpfsd Ri Ezsx Agwsip Spindle Speed Range: (8 steps) 70 - 2000 rpm Longitudinal Feed Range: (40) 0.053 - 1.29 mm/rev Cross Feed Range: (40) 0.013 - 0.31 mm/rev Metric Threads: (32) 0.4 - 7 mm Inch Threads: (36) 4 - 60 TPI Quill Travel: 110 mm Quill Taper: MT 3 Motor Output (S1 100%): 1.5 kW (400 V) Motor Input (S6 40%): 2.2 kW (400 V) Machine Dimensions (W x D x H): 1730 x 700 x 1340 mm Approx. Weight: 514 kg * Removable bed section Scope of Delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-160 mm / D4 • Faceplate 200 mm / D4, according to DIN 55029 • Fixed steady rest – max. passage diameter 60 mm • Travelling steady rest – max. passage diameter 60 mm • Clamping plate 250 mm • Four-way tool post • Shaft locking device • Safety guard for tool post • Slip clutch • Micrometer longitudinal stop • Coolant system • Extendable chip tray • Motor with magnetic brake according to CE standard • Foot pedal with brake function according to CE • Splash guard • Thread dial indicator • LED machine light • Reducing sleeve • Change gears • 2 centre points • Base frame • Operating tools

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.750 mm, skupna širina: 2.800 mm, skupna višina: 1.830 mm, zahteva za prostor dolžina: 2.800 mm, potrebna širina: 2.850 mm, potrebna višina: 1.900 mm, proizvajalec motorjev: Bitzer, volumenski pretok: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid had its own cold store, but the capacities listed in the specifications are combined. Gedpfx Agjx Ap Hpjwjip Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, as well as pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, as well as pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Stanje: zelo dobro (rabljeno), Bitzer two-stage compressor unit - Type: S6G-25.2Y (x4) - Displacement: 84.5 m³/h (x4) - Cooling capacity for R404A: 139.2 kW at -25°C/40°C, 120 kW at -30°C/40°C, 84.8 kW at -40°C/40°C Gedewhunljpfx Agwsip - Set dimensions: 2610 x 1100 x 1890 mm - Stock: 2 units available - Stock number: Z 102 - Condition: Used, very good

Stanje: rabljeno, Bitzer kompresorska enota -Tip: 4EC-4.2Y-40S (x3), 4EC-6.2Y-40S (x3) -Pretok: 22,7 m3/h (x6) -Hladilna zmogljivost za R404A: 90,5 kW pri -5°C/40°C, 73,8 kW pri -10°C/40°C, 42,4 kW pri -25°C/40°C Gisdpfx Agow Raz Iewjp -Dimenzije: 1900 x 800 x 1800 mm -Zaloga: 1 kos -Skladiščna številka: Z116 -Stanje: Rabljeno, v zelo dobrem stanju, testirano, pripravljeno za uporabo

Stanje: rabljeno, 1. Teko ROXSTA 2.0 compressor rack, equipped with 4 Bitzer CO2 compressors (model 4DTC-25K-40P) and 1 Bitzer CO2 compressor (model 4FTE-20K-40S), complete with original control panel -Compressor types: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) -Flow rate: 21.2 m³/h (x4), 17.5 m³/h (x1) -Refrigeration capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C -Compressor rack dimensions: 3300 x 950 x 2200 mm -Control panel dimensions: 1350 x 950 x 2000 mm -Year of manufacture: 2018 Gisdpfx Asxn Nudsgwjp 2. Evaporators - 5 units Guntner S-DHN 051C/24, dual discharge, entirely stainless steel (housing and block) -Type: S-DHN 051C/24 -Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 -Heat exchange surface: 101.9 m² -Air flow: 11,240 m³/h -Fin spacing: 4 mm -Fans: 2 x 510 mm -Dimensions: 2550 x 1560 x 480 mm -All stainless steel housing and block -Year of manufacture: 2019 -Volume: 25.7 l -Weight: 149 kg -Quantity: 5 units 3. Evaporators - 3 units Guntner S-CXDHN 046C/37, dual discharge, entirely stainless steel (housing and block) -Type: S-CXDHN 046C/37 -Cooling capacity: 21.9 kW at DT8, 17.7 kW at DT7 -Fin spacing: 7 mm -Fans: 3 x 460 mm -Dimensions: 2950 x 1560 x 480 mm -All stainless steel housing and block -Year of manufacture: 2021 -Volume: 29.9 l -Quantity: 3 units 4. Evaporator - 1 unit Guntner S-CXDHN 046C/37, dual discharge -Type: GADC CX 035.1/41M/HEC7E.TNNN -Fin spacing: 7 mm -Fans: 4 x 350 mm -Dimensions: 3150 x 1000 x 300 mm -Electric defrost heaters -Year of manufacture: 2024 -Volume: 14.2 l -Quantity: 1 unit 5. Evaporators - 4 units Guntner GACC CX 040.1/3-70.E-1845718M -Type: GACC CX 040.1/3-70.E-1845718M -Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 -Exchange surface: 63.3 m² -Air flow: 8,640 m³/h -Fin spacing: 7 mm -Fans: 3 x 400 mm -Dimensions: 2370 x 550 x 580 mm -Electric defrost heaters -Year of manufacture: 2019 -Volume: 11.1 l -Weight: 114 kg -Quantity: 4 units 6. Guntner GVD080.4C/2x3-EK.E V-type condenser -Type: GVD080.4C/2x3-EK.E -Year of manufacture: 2018 -Volume: 60.2 l -Fans: 6 x 800 mm, 490 rpm, with frequency inverter -Dimensions: 4500 x 2320 x 2850 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 250 h, številka stroja/vozila: 0131, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, Premer cevi (maks.): 48 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 180 °, skupna masa: 670 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 1, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, nujno zaustavitev, T U B O M A T – simply smart. TUB-C G3001 The pipe bending machine is ideally suited for single part and small batch production. Using the software, individual pipes can be parameterized, simulated, and saved. The bending data is then transmitted to the machine via a network (LAN). Basic Bending Equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-level bending angle preselection or program operation - 80 memory locations for up to 10 sets - Set/actual value display for bending angle - Compact, forward-positioned bending head - Optimized tool concept - Hydraulic bending drive, operated with a proven hand lever - Hydraulic pipe clamping - Hydraulic pressure die adjustment - Hydraulic mandrel extractor - Mobile machine design - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal basic drive unit for mounting attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235 with Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Maximum bending angle: 180° (+10° overbending) - Bending accuracy: ± 0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Connection specs: 400 V / 50 Hz / 3-phase - Power plug: CEE 16 A - Colours: RAL 9006 / 7021 / 5015 Gijdpfex E Rdwjx Agwjp Software (Windows 11) PIPEFAB 4.0 BE Basic Package Pipe Bending Software - Oracle Express database for single-user application - Creation of isometrics (single tubes) - ConCSVImp – Interface for CSV format import - Calculation of bending data considering springback, elongation, and rebound - Verification of clamping lengths and start/finish lengths - Output of bending data (printout) - BendSim – Bending simulation and graphical display via parametric tool design - BendCon – Creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool Holders 1 adapter set for bending rollers with 25 mm mounting bore 1 clamp adapter assembly space 100 mm 1 support for fixed pressure die assembly space 100 mm Bending Tools Bending tools consisting of bending roller, clamping block, and fixed pressure die Tube Ø / Bending Radius - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel pipes Design with lubricant channel for minimum quantity oil lubrication - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly fittings for cutting ring connectors (L=light, S=heavy duty) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses available. The machine is used but in like-new condition. The machine can be inspected and demonstrated by arrangement. The machine must be collected from us, but we can assist with loading. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors excepted.