Obdelovalni center z neprekinjenim podajanjem

BIESSE SKIPPER 130

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 3000 mm Delovno območje Y: 1300 mm Delovno območje Z: 90 mm Zgornja vrtalna skupina 1 elektromotorni vreteno, ISO 30 priključek 31 svedrov za vertikalno vrtanje 8 svedrov za vodoravno vrtanje v smeri X 2 svedra za vodoravno vrtanje v smeri Y 1 skupina krožne žage, premer 160 mm 1 vodoravna skupina za vrtanje/rezkanje, usmerjena v Y smeri Spodnja vrtalna skupina 1 elektromotorni vreteno, ISO 30 priključek 31 svedrov za vertikalno vrtanje Iodpfx Abszbb Uwoxsau 8 svedrov za vodoravno vrtanje v smeri X 2 svedra za vodoravno vrtanje v smeri Y 1 skupina krožne žage, premer 160 mm 1 vodoravna skupina za vrtanje/rezkanje, usmerjena v Y smeri Programska oprema: BiesseWorks Nalaganje kosov na levi strani na zračni blazini 2 klešče za premikanje plošče Avtomatski pasovni izhodni transport Varnostne preproge Stranske varnostne mreže Teža pribl. 3100 kg. Na voljo december 2026.

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Iedpfel Txw Hox Abxoau Gluing system: EVA Joint milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: rabljeno, Leto izdelave: 2014, številka stroja/vozila: 33041, Funkcionalnost: popolnoma funkcionalen, moč: 4,5 kW (6,12 KM), potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 90 mm, Oprema: CE označba, The machine has been regularly maintained and is in excellent working condition. Linear guides and ball screws are in excellent condition, without any play. Infeed and outfeed tables are fully functional. The transport clamps operate synchronously and with strong clamping force. The drilling unit is equipped with 82 spindles. Both upper and lower milling heads operate with ISO 30 tool holders. The bearings on the motors are in good condition and run at 24,000 rpm. The machine control is operated via the BiesseWorks interface. Iedpfjy Sfi Iex Abxsau The electrical components inside the control cabinet are clean and dust-free.

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit Iaodsd Inktopfx Abxju - Cross-cutting unit - Milling unit - Fine milling unit - Scraper - Buffing unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, skupna masa: 3.800 kg, Ta 3-osna BIESSE Selco WN 2 je bila izdelana leta 2020. Ima robustno maso stroja 3900 kg in deluje na napetosti 400 VAC s porabo 12 kW. Stroj je zasnovan za učinkovito razrezovanje plošč in ima oznako CE za skladnost. Če iščete visokokakovostno formatno žago, priporočamo, da razmislite o stroju BIESSE Selco WN 2, ki ga prodajamo. Za več informacij nas kontaktirajte. Iaedpfjyt Rklsx Abxou • Teža krmilne omare: 190 kg • Napetost napajanja: 400 VAC • Polni tok: 24 A • Število faz napajanja: 3 • Poraba energije: 12 kW • Frekvenca: 50 Hz • Kratkostna vzdržljivost: 10 kA RMS • Dovod stisnjenega zraka: 6,5-7 bar • Zahtevana hitrost odsesavanja: 30 m/s • Oznaka CE: Da

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing Iodpfswvqklsx Abxeau • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: novo, Leto izdelave: 2024,

Leto izdelave: 2024, stanje: novo, Return System Year of Manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edge banding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable and synchronizes with the edge banding machine. The RTS Compact comes complete with a control cabinet and is immediately ready for operation once installed. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Iaedpjw Nadmofx Abxeu Optional: "RTS Compact Ergonomics Package" available. Includes a lift table and an air cushion table at the end of the return conveyor, enabling ergonomic operation. - Compatible with edge banding machines from all manufacturers - Single-operator control of the edge banding machine possible - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 days - Rotating device for small parts - Comes with conveyor: length 4500 mm, width 800 mm Single-track roller rail RTS Compact control option: control box Availability: short notice Location: Flörsheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Ijdpfsh E Sghjx Abxsau Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 9.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3284, Standardna različica RUF Lignum R2 z izstopnimi kanali, el. motor 22 kW, velikost briket 150x60 mm, zmogljivost do 500 kg/h Iedsyyl Sropfx Abxeau