Prostor za brizganje z dovodno stropom

Berkmann

Stanje: rabljeno, Leto izdelave: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, i.e., a negative pressure is created on one wall side of the room, while on the other side, the supply air system creates a positive pressure. - Almost the entire room air flows in a directed, low-turbulence manner from the supply air side towards the exhaust side. - Paint mist generated in the airflow is captured and removed. - With Berkmann extraction systems, air is extracted throughout the entire area, not just in the intake area of the spray wall as with conventional systems. - This enables the coating of larger parts. - Additionally, it is not necessary to work directly in front of the extraction unit. - The patented "gap extraction" provides high extraction speeds on all sides (even at floor level, where solvents accumulate). - The special configuration allows for extremely large filter surfaces, resulting in exceptionally long filter service life. Dcedpoxwz H Rjfx Afnsd - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, resulting in energy savings of up to 50%. - Includes BASIC paint mist extraction unit, 7,000 m³/h - Includes supply air unit - Includes solvent evaporation device - System is underfloor with grating cover - Dimensions of gratings approx. 3,500 x 3,400 mm - Filter surface area of device approx. 3.7 m² - Supply air system approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation system approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system and 4 large-area filter ceilings with EX lamps - With control cabinet and microprocessor control - With used Kremlin paint application device Price excludes disassembly, removal and on-site pick-up. Availability: Approx. mid-April 2026 Location: Hesse

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly inspected before delivery Technical Data Summary (For any additionally included accessories, please inquire) Pos. 1: Cross-cut saw ----- > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for identifying the saw cut > NC length stop, mounted on slotted table included Positioning of the cross-cut saw integrated into control system. > Length: 3500 mm Pos. 2: Tenon and slot spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb-cut and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis Dedsvu Hfqjpfx Afnocd > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide rail in the stop (area of climb-cut spindle), Sash support bar from above in the area of vertical right profile milling unit and profiling spindle. Pos. 5: Profile milling unit horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-capable > Rebate unit for tear-free rebating > Double-part package > Return conveyor for one-man operation: pivoting belt > Screen control > Tilt window device > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original pictures available yet. Photos show an identical machine from our archive. ----- Price for the above machine on request! ----- Optional at extra cost: EUR 6,500.00 Note...

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: Dcedpfxst R T Hco Afnsd 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: zelo dobro (rabljeno), Gold-anodized plates Working dimensions 2.5×1.1 m Dcsdpfou I N D Hsx Afnsd Electric heating Fully functional, tested You can call or write to us. We speak and write German and Russian. You can also send messages in English. 31.3.5

Stanje: pripravljen za uporabo (rabljen), Prodajam tračni transporter, viden na slikah, dolžine približno 7,5 m. Širina traku je 0,3 m. Možen prevoz. Dsdpfx Afjr Nvx Uonscd

Leto izdelave: 1994, stanje: dober (rabljeno), Rivo bandsaw sharpening machine Dcedpfx Aopl D Hxsfnjd Model GA 250

Leto izdelave: 1997, stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system • Cross sanding unit • Longitudinal sanding unit - shoe type • Brushing unit Dsdpfx Afoidi Ivonscd • Ionisation

Stanje: novo, Leto izdelave: 2025, KOMPAKTNA RAZTEGLJIVA KOMORA ZA PRŠENJE TEKOČIN Raztegljive komore za pršenje so zasnovane za ročno nanašanje barve s stranskim izsesavanjem, namenjene izločanju razpršene tekoče barve. Prednost raztegljivih komor je prihranek prostora v delavnici. KONSTRUKCIJA Izdelana je iz škarjastega sistema karoserije, sestavljenega iz elektrogalvaniziranih pravokotnih in okroglih cevi, zunaj pa je prekrita s PVC platnom. Gibljivi sistem vključuje industrijska kolesa ali vodila z drsnimi kolesi; izbira je odvisna od tega, ali je uporaba zunanja ali notranja ter od dolžine komore. Vrata so zasnovana kot zavesa, ki se zapre med samim nanosom barve. SISTEM VENTILACIJE Dsdpfx Asvxfkajfnecd Stransko izsesavanje zagotavlja visoko učinkovitost med nanosom barve. Filtrirna stena je modularne izvedbe iz pocinkane pločevine, z integriranimi policami ter zasilnimi vrati na obeh straneh. Izsesovalni ventilator je nameščen na vrhu filtrirne stene, električni motor ventilatorja pa je zunaj zračnega kanala, kar preprečuje stik motorja z onesnaženim zrakom in s tem zmanjša tveganje za iskre. SISTEM FILTRACIJE Izsesovalni filter je dvostopenjski in zagotavlja 99,9 % učinkovitost; nameščen je na stranski filtrirni steni komore. Pred-filter se nahaja pri vratih v obliki zavese, ta zagotavlja naravni pretok zraka med delovanjem izsesovalnega ventilatorja. Kontrolna plošča ima opozorilno luč, ki vas opozori na potrebno servisiranje ob zamašitvi filtrov. Izdelano v Turčiji CE oznaka Ponujamo najboljše tehnične rešitve in konkurenčne cene! * Pisarna v Franciji in Nemčiji. Kontaktirajte nas za več informacij in ponudbo.

Stanje: rabljeno, številka stroja/vozila: 12625, Rotor diameter: 800 mm Dcodpfx Afek Rfvkjnod Rotor width: 1500 mm 6-knife rotor 4 rows of stator knives Infeed opening approx. 820 x 1500 mm Drive motor: 160 kW

Stanje: novo, Jeklena konstrukcija dimenzij 7 m x 32 m (možnost podaljšanja), višina stebrov: 4,176 m (višji) in 3,338 m (nižji). V drugih oglasih nudimo konstrukcije z višjimi stebri: 5 m (višji) in 4,17 m (nižji), ter v različnih dolžinah, v izvedbah z nosilci za stenske letve ali brez nosilcev. Dcedpfeychpwex Afnjd