5271 - BERGMANNOVA STISKALNICA PAPIRJA

Bergmann PS 8100-L

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (X/Y/Z): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine is malfunctioning due to moisture and should be inspected. Nledoip D Rpjpfx Abnji

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 20.536 h, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, lastna masa: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput rate: 300 m³/h Nljdpou Thypofx Abnji Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying system: 4-fold vertical, fully automatic Throughput rates (depending on bulk density): — 30 kg/m³: approx. 6.0 t/h — 50 kg/m³: approx. 10.5 t/h — 100 kg/m³: approx. 17.5 t/h Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special features: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk goods of small grain size • Switch cabinet with air conditioning • Machine base raised by 200 mm Note: The machine is currently located in our workshop and is undergoing partial refurbishment. We expect the overhaul to be completed by the end of October, after which the machine will be tested and released for sale.

Stanje: novo, GENERAL A signature feature of the ZIS series single-shaft shredders is their spacious cutting chambers, whose stability is ensured by their heavy-duty welded steel construction. The rotor diameter is a generous 457 mm, and rotor widths are available in 1200, 1500, and 2000 mm options. The ZIS series retains all the benefits of the ZSS series: drive via an oversized gearbox, reversible knives, bolted knife holders, robust external bearings, hydraulic screen cradle, user-friendly operation, and advanced control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. In addition, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines in the ZIS series can be equipped with various wear-resistant options. ADVANTAGES - 35% larger cutting chamber volume compared to the ZSS series Nodpfxsghgdvo Abnoli - Internally positioned hydraulic pusher - Increased pusher speed in the return stroke - Compact dimensions - Bolted knife holders mounted in the rotor pockets

Stanje: rabljeno, Casing-In / Book Casing-In Machine - Book Form Press Kolbus EMP - FE Year of manufacture: 1966 Block size: min. 125 x 100 x 6 mm / max. 370 x 270 x 80 mm Nodpfx Aevuaqysbnsli Case size: min. 125 x 210 mm / max. 370 x 62 mm Performance: up to 36 cycles per minute Online video inspection possible via WhatsApp, MS Zoom, or Telegram. In stock in Emskirchen/Nuremberg – Available immediately – Test run possible.

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Nledpfoh Nyfyex Abnoi Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced Nsdpfx Abovwlqqonoli - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, moč: 1,5 kW (2,04 KM), Tria plastic mill, shredder, granulator for sale in excellent condition Manufacturer: TRIA 20-15/BL-T Power: 1.5 kW, 50 Hz, 380 V Nlsdpfxsra N A Ne Abnei Year of manufacture: 1997 Feed opening: 200 x 230 mm Rotary knives: 3 pcs Fixed knife: 1 pc Discharge opening: 60 mm Final product size: 3–5 mm Throughput capacity: approx. 30 kg/h.

Stanje: dober (rabljeno), Leto izdelave: 1987, Manufacturer Model: PS 8100 Height: 2,200 mm Width: 1,200 mm Length: 1,625 mm Loading height: 1,900 mm Weight: 800 kilograms Rated current at 400 V: 4.8 A Transformer rated current at 230 V: 0.38 A Motor power: 2.2 kW Fuse: 10 A, slow-blow Rotation: 13 rpm Protection class: IP 54 Fire class: D, E Hydraulic oil: HLP 32 Bale weight (depending on material): 150–400 kg Njdpfok E Hh Ssx Abnoli Bale volume: 1 m³

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), Connected load: 15.5 kW, weight: 6.8 t. Njdpfoip D Rzox Abneli

Leto izdelave: 1973, Stanje: rabljeno, Waste compactor container, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary compactor for: roll-off containers - Feed chute: covered - Compaction process: hydraulic - Compaction process: automatic Nlodpfsb A Ii Ssx Abnoi - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for roll-off containers - Function tested