Ščetkarski stroji Bürstmaschinen Bauerrichter ES-R1

Bauerrichter ES-R1

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Gusdpfx Aevf E Avofqec Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Please contact me for further information. Gujdsk Nn Ilepfx Afqec

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V tem ponudbi kupite rabljeni barvni produkcijski sistem 'Canon imagePRESS C9010 VP'. Predmet prodaje: 1 x Canon imagePRESS C9010 VP z naslednjo opremo: vključuje Prisma krmilnik ali Fiery krmilnik vključuje izdelovalec brošur N2 vključuje visoko-kapacitiven zlagalnik H-1 vključuje POD Deck D1 Števci: Skupaj: Približno 1.880.920 strani Gsdpfx Afju Ecl Eeqjuc Stanje: Pri tej ponudbi gre za rabljeno napravo, ki lahko kaže znake uporabe (manjše praske ali porumenelost). Naprava je bila preizkušena za delovanje Preizkusni izpis je viden na fotografiji Pakiranje in dostava: Napravo si lahko med delovnim časom ogledate pri nas. Prosimo, da za ogled predhodno rezervirate termin! Morsko varno pakiranje in svetovna dostava na zahtevo mogoč! Pred pošiljanjem ali prevzemom bomo za vas beležili funkcijski preizkus na videoposnetku. Za dodatne informacije smo vam z veseljem osebno na voljo.

Stanje: dober (rabljeno), Leto izdelave: 2003, Automatic Hydraulic Gluing Press Kallesoe Type LV 7821 This press is used for gluing wooden elements, such as panels, with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by warm water supplied to the press bed, which is kept in continuous circulation (it can be supplied from central heating or heated by built-in electric heaters on the press). Press heating power: 72 kW Maximum press output: up to 2000 m² / 7.5 hours Gjdpfx Aferqzgkeqjuc Glue applicator with feed system for Kallesoe Press Type KL40 – designed for automatic glue application to each lamella and direct transfer to the LV7821 press.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.670 mm, pomik po osi Z: 500 mm, število osi: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and C-axis rotation from 0–360°. The machine is equipped with a linear tool changer with 12 positions and a comprehensive drilling head with 16 spindles. In addition, it has a robust safety system with light curtain. Take advantage of this opportunity and purchase this CNC machining center Felder Format 4 Profit H 200. Contact us for further information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depending on clamping system) • Operator terminal on the left side of the machine • Handheld terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction pads • Vacuum connection for template routing (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including storage for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling depth 70 mm; shank diameter 10 mm Gsdpfxox D D Hms Afqouc • Grooving saws: 2 (one X, one Y); max. blade diameter 120 mm; max. thickness 5 mm; continuously adjustable speed up to 7,500 rpm • Safety: Front light curtain system

Stanje: dober (rabljeno), Leto izdelave: 2020, Masterwood Project 351 L 3-osiowy CNC Opis Chłodzony powietrzem 3-osiowy elektrowrzeciono frezujące 17,5 KM (HSK-63F) Przemiennik częstotliwości umożliwiający programowanie prędkości obrotowej 1.500–24.000 obr./min Zmieniacz narzędzi na 22 pozycje 6 pneumatycznych, wpuszczanych prowadnic paneli do załadunku/pozycjonowania ciężkich elementów Przygotowane do montażu docisków 2 poziome dociski do drewna klejonego warstwowo Guedpovu U Itofx Afqec 6 punktów bazowych wzdłuż osi X (pozycjonowanie paneli przy tylnej krawędzi podpór) 8 punktów bazowych wzdłuż osi X (pozycjonowanie paneli w połowie długości podpór) Pełne odniesienie po prawej stronie wzdłuż osi Y Pełne odniesienie po lewej stronie wzdłuż osi Y 2 pola robocze 1 x pompa próżniowa 100 m³ 24 przyssawki próżniowe Pilot radiowy z cyfrowym wyświetlaczem Automatyczny system pomiaru narzędzi Taśmociąg do transportu odpadów Agregat wiertarski z 19 wrzecionami (rozstaw 32 mm) 2,2 kW - 7 pionowych wrzecion w kierunku X - 6 pionowych wrzecion w kierunku Y - 4 poziome wrzeciona w kierunku Y - 2 poziome wrzeciona w kierunku X (wszystkie wrzeciona wiertarskie programowane niezależnie) Jednostka sterująca z komputerem PC Oprogramowanie SINCRO CAD/CAM MASTERWORK Dane techniczne Zakres roboczy w osi X: 5.130 mm Zakres roboczy w osi Y: 1.550 mm Prędkość w osiach X-Y: 80 m/min Prędkość w osi Z: 25 m/min Maks. grubość obrabianego elementu: 200 mm Moc silnika frezującego: 17,5 KM (S1) Obroty elektrowrzeciona frezującego: 1.500–24.000 obr./min Agregat wiertarski: 3 KM System uchwytów narzędziowych: HSK63-F Zmieniacz narzędzi: 22 pozycje Pompa próżniowa: 100 m³ Średnica króćca odpylającego: 250 mm Wydajność powietrza: 4.500 m³/h Prędkość powietrza: 30 m/s Ciśnienie robocze sprężonego powietrza: 7 bar Zużycie sprężonego powietrza: 300–500 l/min Wartość zabezpieczenia: 40 A Waga: 7.000 kg (Wszelkie zmiany, błędy w danych technicznych, informacjach i cenach zastrzeżone. Dostępność może ulec zmianie. Bez gwarancji na dane drukowane!) Najlepsze maszyny do obróbki drewna z Holandii

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, TAKAMAZ CNC Kompaktni nalagalnik FC60 Stružnica z avtomatskim nalagalnikom in razkladalnikom najhitrejši sistem za nalaganje na svetu čas nalaganja novega kosa 2,8 sek. zmogljivost nalaganja do premera 60 mm največja dolžina nalaganja 50 mm največja teža 1 kg na stran hitrost nalaganja 120 m/min vključuje obračanje kosa med nalaganjem Krmiljenje Fanuc popolna 2-letna garancija Gsdsm E I D Hopfx Afqsuc Specifikacija stružnice: Glavni motor 7,5/5,5 kW največji premer struženja 180 mm največja dolžina struženja 240 mm zmogljivost bara 35 mm zapenjalna glava 173E do premera 40 mm čelo vretena A2-5 hitrost vretena 4500 obr/min število mest za orodje 8 ročka orodja 20x20 mm diržalo za vrtanje premera 25 mm hitri pomik X/Z 18/24 m/min dimenzije stroja 1,36 x 1,37 m višina 1,7 m teža 2,7 t skupna moč 14 kVA Cena je EXW (Evropska zaloga), nakladanje na tovornjak vključeno. Prevoz, montaža, zagon, usposabljanje in letne servisne pogodbe so na voljo na zahtevo za doplačilo. Inštalacijo in usposabljanje vedno opravlja naša visoko usposobljena servisna ekipa na treh lokacijah v Evropi: Nizozemska, Nemčija, Romunija.

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Prasa o wymiarach roboczych 4,5 m x 1,9 m Gujdpfx Afjlzi S Neqoc

Stanje: rabljeno, Leto izdelave: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 - Processing dimensions for edge milling: - X = 3514 mm - Y = 1544 mm Gusdox Enpqjpfx Afqsc - Maximum processing dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in X-axis and 6 in Y-axis - individually selectable - T-shape arrangement - max. drilling diameter 35 mm (depending on panel thickness) - spindle stroke: 70 mm - rotation direction: alternating clockwise/counterclockwise - speed: 4725 rpm, infinitely variable - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatic swivel - speed: 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - sawing/grooving in X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for mortise lock case milling - Tool changer 7996: - 18-position magazine (carousel) - Vacuum pump with 140 m³/h - Hand-held control device - PC control with TwinCAM WOP system - Siemens control Availability: short-term Storage location: 63934 Röllbach

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 195 mm, pomik osi Y: 80 mm, pomik po osi Z: 380 mm, moč vretenovega motorja: 15.000 W, skupna masa: 8.000 kg, proizvajalec krmilnikov: MITSUBISHI, model krmilnika: M730VS, število osi: 8, This 8-axis Citizen BNE-51MSY was manufactured in 2018. It features a maximum bar diameter of Ø 51 mm and a spindle speed of 5,000 rpm. The machine is equipped with 12 turret stations and an X1-axis slide travel of 195 mm. If you are looking for a high-quality turning machine, consider the Citizen BNE-51MSY horizontal lathe we have on offer. Contact us for further details. • Maximum bar diameter (SP1): Ø 51 mm • Maximum bar diameter (SP2): Ø 51 mm • Spindle speed (SP1/SP2): 5,000 rpm • Spindle motor (SP1): 15/11 kW (15min./cont) • Spindle motor (SP2): 7.5/5.5 kW (15min./cont) • Turret stations: 12 pcs. (HD1) / 12 pcs. (HD2) • Driven tool motor: 2.2 kW • Driven tool torque: 20 Nm Guedpfsywy Shjx Afqoc • Driven tool speed: Max. 6,000 rpm • Slide travel (X1/Z1): 195 mm / 380 mm • Slide travel (X2/Z2): 195 mm / 175 mm • Y1-axis travel: 80 (± 40) mm • B-axis travel: 450 mm • Rapid traverse (X1/Z1): 18 m/min / 20 m/min • Rapid feed (Y1): 12 m/min • Power supply capacity: 44 KVA • Voltage: AC 200/220 V • Coolant tank capacity: 350 L • Including bar feeder Technical Specification Counter Spindle: Yes Driven Tools: Yes