Vrtalni stroj za rezkanje

Bauer Z30

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Motor z gonilom Ncedpfxeb A H S Is Altew - Število obratov: 19,5 obr/min - Moč: 0,37 kW - Zavora: 24 V - Oblika konstrukcije: B5 - Gred: Ø 30 x 60 mm - Razred zaščite: IP 65 - Količina: na voljo 4 kosi - Cena: na kos - Dimenzije: 665/200/H250 mm

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Ncodsfu Ivzspfx Altew Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: rabljeno, Gear motor, electric motor - Speed: 9.7 rpm Ncsdpsdff I Ejfx Altjw - Power: 0.37 kW - Design: B5 - Brake: 24 V DC - Shaft diameter: Ø 40 mm - Protection class: IP 65 - Quantity: 1 available - Dimensions: 690/300/H230 mm - Weight: 52 kg

Stanje: generalkompletno obnovljen (rabljeno), Used storage tank made of steel according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: - 3" filling pipe with TW cap Nodpfohvmitjx Altscw - 1" dip pipe with dipstick - Euroflex 3 suction assembly (max. 150 l/h) - 1 vent nozzle 2" with vent cap The tank is factory-equipped with the aforementioned fittings and is cleaned inside. Capacity: 50,000 litres Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be supplied with a new coating in the RAL colour of your choice and optionally equipped with a ladder including operator platform. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and we will promptly provide an exact shipping quote. Should you require any further information, please feel free to call us or send us an email. Trade-in and purchase of tanks/containers is possible – just contact us about this. Delivery time by arrangement! We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Right Discharge 5 Sorting Bins Total Length 26 Meters 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry. Ncedpfx Ajgw Scqoltew

Leto izdelave: 2022, obratovalne ure: 108 h, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: SN2120, EDM312MF30-SLM (second-life machine) Technical Data: Travel distances: 450x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance table/electrode holder: 150/450mm Max. workpiece weight: 800kg Max. dielectric fluid: 700l Dimensions (W x D x H): 2700x1800x2350mm Machine weight: 2500kg Power supply: 3/N/PE 400/230V 50Hz Connected load: 6.7 KVA Equipment: Color: newly painted in light grey + tele grey New control cabinet New APC910/2 controller (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A generator Rev.4 5-position tool changer (WZW) Contact protection operable via push button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Ncedpjhtrdyjfx Altew Termogamma cooling unit Completely new machine wiring New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve terminal CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling switch Automatic lowering tank Clamping chucks: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.521 h, Deckel Maho DMC 835V CNC obdelovalni center Letnik: 2008 Krmiljenje: Siemens 840D s Shopmill Pomik X/Y/Z: 835mm/510mm/510mm Hitrost vrtenja: 10.000 vrt/min Moč vretena: 14kW Ncsdpfxoxxpcvs Altjw Dimenzije mize X/Y: 1000mm/560mm Nosilnost mize: max. 800kg Višina obdelovanca: 720mm Število orodij: 20 Orodni nosilec: SK40 Teža: ca. 4500kg Delovne ure: 9521h Transporter za odrezke

Stanje: novo, Connection voltage: 230 V Battery: 24V / 100Ah Brush diameter: 510 mm Rotation speed: 175 rpm Vacuum airflow: 24 L / s Tank capacity: 50 / 50 litres Weight: 160 kg Dimensions (L x W x H): 1,100 x 520 x 1,000 mm KREMER floor cleaning machine: Supplied with battery and charger Theoretical area performance: Output: 2,000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area gradient: 2 % Clean/dirty water tank capacity: 50 / 50 L Ncedpfovu Hccsx Altjw

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 30 W, najv. debelina jeklene pločevine: 80 mm, maks. debelina aluminijaste pločevine: 50 mm, The Durma HD-F 3015 Fiber Laser Cutting System with 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine designed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability, and outstanding customer service. Features: 30 kW / 80 mm mild steel, 50 mm stainless steel Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal length F300 mm Ncjdpfxeq Nl T To Altsw Conveyor system Technical Data: Power output: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Z-axis travel: 160 mm Maximum simultaneous speed: 170 m/min Maximum simultaneous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeatability: +/- 0.02 mm Product Description of the Durma HD-F 3015 30 kW: Powerful and Efficient: Equipped with a 30 kW fiber laser, the Durma HD-F 3015 delivers outstanding cutting performance and precision for a variety of materials, including steel, aluminum, and copper. Generous Working Area: With a working area of 3,000 x 1,500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC Control: The user-friendly and precise control system allows for easy operation and optimizes cutting paths to minimize material waste. Automatic Nozzle Changer System: This feature increases productivity and reduces downtime during nozzle changes. Energy Efficient: The laser boasts high energy efficiency, resulting in lower operating costs. Robust Construction: The machine is designed for durability and reliability, even under demanding working conditions. Safety: Comprehensive safety features ensure secure operation. Versatility: Compatible with various laser cutting software solutions, making it suitable for multiple industries. Durma Maschinen GmbH – Your Reliable Partner: As the manufacturer of the Durma HD-F 3015, we at Durma Maschinen GmbH are proud of our rapid and efficient service as well as our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting requirements. Interested in the Durma HD-F 3015 30 kW? Contact us for a non-binding consultation or a customized offer. At Durma Maschinen GmbH, we are happy to assist you with any questions and to find the best solution for your needs. We look forward to your inquiry!

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 8.700 h, Funkcionalnost: popolnoma funkcionalen, Der gebrauchte 2-Achs CNC-Drehmaschine DAEWOO Lynx 200B ist eine robuste und schnelle CNC-Drehmaschine mit schrägem Bett und Flachführungen in kompakter Bauweise. Sie ist mit einer CNC-Steuerung FANUC 21-T mit LCD-Monitor, Baujahr 1998, gemäß CE-Norm ausgestattet. Hauptmerkmale: Ncodpfx Asx Nqlisltew - Max. Umlaufdurchmesser über Bett: 460 mm - Max. Drehdurchmesser: 280 mm - Max. Drehlänge: 500 mm - Max. Stangendurchlass: 51 mm - Spindelaufnahme: ASA 6” - Spindel: max. Drehzahl 4.500 U/min - Spindelmotorleistung: 11 kW - Revolver: 10 Werkzeugplätze - Werkzeugabmessungen Dreh-/Bohrhalter: 25×25 / Ø40 mm - Reitstock: Pinolendurchmesser 65 mm, Pinolenhub 80 mm, MK4 - Maschinengewicht: 3.500 kg Zur Ausstattung gehören ein programmierbarer Reitstock mit automatischem Pinolenhub, Werkzeugvoreinstellung, ein hydraulisches 3-Backenfutter (wird anstelle des manuellen Futters geliefert) sowie Betriebs- und Wartungsanleitungen.