Tračna žaga

BAUER S 300 l

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control unit: HEIDENHAIN TNC 410 Spindle speeds – infinitely variable: 0 – 4000 rpm Quill stroke: 60 mm Bljdpfsunt Ihjx Aiqjn Tool holder: SK 40 Table clamping surface: 650 x 350 mm Total power requirement: 6.5 kW Machine weight approx. 1.8 t Space requirements approx. 2.5 x 1.8 x 2.0 m Electronic handwheel HR 410 Probing system MP 11, automatic tool measurement TT 120 Enclosure, tool holders, ...

Stanje: rabljeno, številka stroja/vozila: 2520, Round steel: 42 mm Square steel: 38 mm Angle steel: 90° 110 x 10 mm Flat steel: 150 x 16 mm Blade length: 250 mm Bljdpfecxxrpox Aiqon Notching depth up to: 12 mm Notching device for L and T steel: 80 x 10 mm Punching station - Pressing force: 50 t Stroke: 27 mm Punching station - Capacity (diameter x thickness): 25 x 16 / 20 x 19 mm Machine weight approx.: 1.6 t Space requirements approx.: 1.6 x 0.85 x 1.8 m

Stanje: novo, moč: 26 kW (35,35 KM), barva: rumena, Payload: 1,000 kg Bljdpfxex S R Hfs Aiqjn

Stanje: kot nova (razstavni stroj), A fully hydraulic WIEGAND demonstration folding machine with NC-10 control manual or automatic bending mode automatic mode: Clamping beam closes, bends to preset angle, clamping beam opens Bending beam or clamping beam can be adjusted manually according to sheet thickness Bjdpjpgmqiefx Aiqoln adjustable clamping beam opening width back gauge manually adjustable CE standard Documentation included Bending length: 2500 mm Bending capacity: 2.5 mm max. bending angle: 0 – 120° Back gauge manually adjustable min/max: 60/1000 mm Power: 3.0 kW Weight: 2,500 kg Technical data and dimensions: subject to change without notice For further technical data, please refer to the PDF document.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 2.200 kg, moč hladilne črpalke: 180 W, dolžina tračnega lista: 4.570 mm, širina tračne žage: 41 mm, AMADA HFA 400 – Automatic Bandsaw for Metal Serial Production | AMADA Quality | Industrial Grade The AMADA HFA 400 is an automatic horizontal bandsaw designed for metalworking, engineered for precise, repeatable cuts in high-volume production environments. This machine stands out thanks to its compact design, robust construction, and proven AMADA machine tool technology. With a machine weight of 2,200 kg and fully automatic sawing cycles, the HFA 400 is ideally suited for manufacturing plants, service centers, and toolmaking operations. ● automatic bandsaw for metal ● AMADA brand quality ● robust construction – 2,200 kg ● saw motor: 5.5 kW ● industrial-grade hydraulics ● automatic cutting sequences ● high precision and repeatability ● suitable for solid stock and profiles ● durable and reliable design Technical Data ● Model: AMADA HFA 400 ● Type: automatic bandsaw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW Bljdpoyc H Ewjfx Aiqjn ● Saw blade dimensions: - Length: 4,570 mm - Width: 41 mm - Thickness: 1.3 mm ● Mains connection: 3-phase ● Connected load: 11 kVA ● Machine weight: approx. 2,200 kg ● Year of manufacture: 2012 Condition: used, fully operational, ready for immediate use 📩 Contact us for price and further information.

Stanje: rabljeno, Screw Compressor KAESER Type BS 50 Serial No. 402852 Year of manufacture: 1990 Free air delivery: 5 m³/min Operating pressure: 7.5 bar Main motor power: 30 kW Mains connection: 400 Volt, 50 Hz Blsdpfsiyu Ifox Aiqon Connection thread: 1 1/2" inch - 1107.90 operating hours (read off) - 749.00 load hours (read off) - Soundproofed Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a backup compressor and has only a few operating hours

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: nepreverjeno, 1 used mitre band saw Make: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2,491 mm Width: 1,240 mm Height: 1,369 mm (bow down), 2,109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Bsdpfxewuqbbj Aiqjln Cutting feed: hydraulically regulated flow control Material clamping: manual Saw band dimensions: 5,090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical, via tensioning cross Saw band cleaning: by easily replaceable wire brush driven in proportion to the main drive. Coolant: Supplied via a coolant nozzle, tank volume approx. 50 l, pump output approx. 16 l/min. Cutting capacities in mm approx.: Mitre angle 0° (90°) 45° 60° Round 400 320 240 Square 320 x 320 320 x 320 220 x 220 Flat (W x H) 400 x 320 210 x 320

Stanje: novo, Solid round material 30 / 900 mm Solid square material 30 / 900 mm Angle steel 35X35X5 / 600 mm Bodpfx Ajq Adtqsiqsln T-steel – web outwards 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roller diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirements approx. 0.75 x 0.6 x 1.4 m Electric profile bending machine - Optional horizontal or vertical operation - 1 set of hardened standard rollers - Lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm/1" - Operating manual - Foot switch for left/right and emergency stop

Stanje: rabljeno, Leto izdelave: 2023, Slicer front attachment, pendulum mounting bracket, front mirror with holder, hydraulic folding of the side protection, warning signs and lighting, standard PTO shaft installed, set of scrapers, set of cone caps. Blodpfx Aetrdh Neiqsn

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), A CNC 4-axis universal bed milling machine Maho is available. Travel X/Y/Z: 1600mm/800mm/800mm, table dimensions X/Y: 1250mm/800mm, max. table load: 3000kg, spindle taper: SK50, main spindle speed: 4000rpm, power: 22kW. Tool stations: 36, max. tool diameter: 160mm/210mm, max. tool length: 315mm/400mm, max. tool weight: 15kg, feed rate: 4m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 5000mm/3700mm/3000mm, weight: approx. 16,000kg, control: Philips CNC 232. An on-site inspection is possible. Bedpfx Aisv Ubqneqjln