Sistemi za laminiranje

BARBERAN RFU-4-C-1700

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line Rjdpeilqvrefx Afaow For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Redpfxsi E Trpe Afasw

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Rsdog Ezaropfx Afasw Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: rabljeno, Regoplas RT50 termo-olaj hőmérsékletszabályozó egység, termo-olaj 300°C-ig Redpfx Afsdmn E Hjaow

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: CAT3512BJLY892034, vrsta goriva: dizel, moč: 1.280 kW (1.740,31 KM), proizvajalec motorjev: Caterpillar 3512B, Namen uporabe: Gradbeništvo Lastna teža: 14.000 kg Moč generatorja: 1.600 kVA Dimenzije tovornega prostora: 572 x 208 x 222 cm Rjdpfxowvdvus Afaow CE oznaka: da Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Za več informacij se obrnite na ekipo DPX. = Dodatne možnosti in oprema = - Baterija - Nadzorna plošča

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Rsdpfx Afjuc Idxeaow Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Leto izdelave: 2001, stanje: rabljeno, • Heating plate size (mm): approx. 1500 x 2700 • Max. usable area (mm): 1250 x 2450 • Loading side (mm): 1500 Redpfx Afskt N Hueajw

Stanje: skoraj kot novo (rabljeno), Inline folie-sealer en krimptunnel Merk: Kallfass Type: semi/automatische krimptunnel Model: Mat 1606-KS1600uni Capaciteit: 10-15 verpakkingen/min (afhankelijk van het product) Frame: Staal Doorvoerbreedte x Doorvoerhoogte: 1600 (band) x 600 mm (B x H) Afmetingen: L x B x H = 4000 x 2050 x 1750 mm Gewicht: 900 kg Elektrisch: 380V + N + E, 65 kW Rjdpfjg D Nv Tox Afajw Staat: In de huidige staat, werkend

Stanje: rabljeno, Leto izdelave: 2022, Overview The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used for bottling sparkling wine in cylindrical bottles ranging from 0.2L to 1.5L. It is equipped with a rinser (air or water), 16 nozzles, 24 electropneumatic filling valves, and 3 capping turrets (with 3 capping heads each). Each capping turret features its own closure feeding and delivery system. A cork dedusting unit is installed. The machine includes an integrated overpressure hood with pre-filters and absolute filters. This unit is sold together with an automatic CIP system and 2 pallet microfiltration units from Win&tech. The machine remains in production and can be inspected. Condition is like new, having only 200 operating hours. Technical specifications Operating direction: left to right Output: - 0.187L – 4,500 bph at 4°C & 15°C - 0.375L – 4,500 bph at 4°C & 15°C - 0.750L – 4,000 bph at 4°C & 2,900 bph at 15°C - 1.500L – 2,000 bph at 4°C & 1,500 bph at 15°C Rsdpfxsv Aag Do Afasw Currently set up for: Glass bottles: 0.187L, 0.375L, 0.750L, 1.500L Closures/corks: natural cork (boucheuse liège), screw cap, decorative closure (Champagne-style) Includes CIP and wine filtration

Stanje: novo, Leto izdelave: 2025, Mechanical Guillotine Shear for Sheet Metal METFORMER HCO-2x2000mm The shear is made entirely of steel, with a solid and heavy-duty construction. It features a simple design with a good appearance and is easy to operate. This shear is widely used for cutting thin and medium-thickness steel sheets in light machinery manufacturing and equipment production. The blade is made from a super-strength steel alloy. Technical specifications: Model: HCO-2x2000 Motor power: 3.0 kW Maximum sheet thickness: 2 mm Rsdpfxofwmydj Afasw Number of cutting edges per blade: 4 Length: 2800 mm Width: 1260 mm Height: 1300 mm Weight: 1350 kg