Termo nafte temperature krmilna enota

Regoplas RT50

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) Dodpog Ezarefx Afljkr *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) Dsdpfx Afeilqvrjljkr - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, *Video je samo primer, kako se lahko pripravi to celico Celica z brusilnim robotom Kuka KR 180 Brusilna celica Berger 2012 (zunanje brušenje A1) - Skupna masa cca 6300 kg - Dimenzije celice: cca 4650 x 2400 x 3100 mm 6-osni robot Kuka KR 180 R2500 Extra - Leto izdelave 2011 - Krmiljenje KRC 4 - Dodatna os (7. os) Trakasta brusilna postaja BSS10 - max. dimenzije traku 3500 x 30 mm Dkodpfeg Saqvex Aflsr - max. premer kontaktnega kolesa 200 mm - Moč motorja 4 kW 2 x polirni postaji, - Premer polirnega koluta 350 - 600 mm - Moč 5,5 kW Omarica za menjavo prijemal Trakasti transporter Interoll Automation GmbH - Skupna dolžina cca 2000 mm - Širina traku cca 440 mm Imamo 4 takšne celice.

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. Dkjdpfx Afoftm Hreljr *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: kabina, Spray / Painting Booth !! Always a brand-new machine (Photos shown are from installations at customer sites). We are the manufacturer. !! The Reinox 450×235 spray booth is the ideal solution for painting large components and for serial production. Thanks to its robust construction, high-performance extraction system, and ATEX certification, safe operation is ensured even in environments with explosion hazards. The booth is equipped with a powerful fan featuring a frequency inverter, allowing smooth adjustment of the extraction rate according to current needs. A three-stage filtration system keeps the workspace clean and ensures a high-quality surface finish. Technical specifications: - Fan certified for ATEX zone 22 - Extraction area: 4,500 × 1,900 mm - Overall dimensions: approx. 4,600 × 2,350 × 1,910 mm - Fan: 4 kW (ATEX version) - Extraction capacity: approx. 20,000 m³/h - Power supply: 400 V, three-phase - Control: frequency inverter – stepless performance regulation via potentiometer on the control panel. - Filtration: three-stage (dry or water-based version according to requirements) - Certification: CE, ATEX Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Dsdsia Taxjpfx Afljkr Do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. Dkjdpeu I R Utjfx Afler The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: rabljeno, Field of view on the objective at 50x: 11.2 x 9.2 mm Field of view on the objective at 100x: 5.6 x 4.6 mm Dkedeb Nxl Ijpfx Afler Projection area: 560 x 460 mm Objective stage size: 230 x 165 mm Glass stage diameter: 80 mm Weight approx.: 230 kg Required space: 1030 x 780 x 1800 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Manufacturer: Demag Model: DH520 H20 4/1 F10 Year of manufacture: 2000 Load capacity approx.: 8,000 kg Hook path approx.: 10,000 mm Crab track approx.: 1,400 mm Reeving: 4/1 Drive group: FEM/ISO 2m/M5 Operating speeds: Hoist approx. 0.8 / 8.0 m/min Trolley travel approx. 5.0 / 20.0 m/min Certificate confirming approx. 80% remaining service life issued by a certified inspector Equipped with: - Mechanical fine lifting F10 - Wire rope and bottom block 4/1 Dsdpfxokqm Aij Afljkr - Trolley drive

Leto izdelave: 2001, stanje: rabljeno, • Heating plate size (mm): approx. 1500 x 2700 • Max. usable area (mm): 1250 x 2450 Dedpfx Afekt N Hujlokr • Loading side (mm): 1500

Stanje: novo, Leto izdelave: 2025, Mechanical Guillotine Shear for Sheet Metal METFORMER HCO-2x2000mm The shear is made entirely of steel, with a solid and heavy-duty construction. It features a simple design with a good appearance and is easy to operate. This shear is widely used for cutting thin and medium-thickness steel sheets in light machinery manufacturing and equipment production. The blade is made from a super-strength steel alloy. Technical specifications: Model: HCO-2x2000 Motor power: 3.0 kW Maximum sheet thickness: 2 mm Dkodpfxsfwmyde Aflor Number of cutting edges per blade: 4 Length: 2800 mm Width: 1260 mm Height: 1300 mm Weight: 1350 kg