Stroj za ravno lepljenje

Barberan CALH-4-1600

Stanje: rabljeno, Leto izdelave: 2004, Press force: 80 t Stroke: 16 - 63 mm Stroke rate: 100 – 750 strokes/min Upright gap: 970 mm Installation height (stroke + ram adjustment, upper position): 380 mm Lateral frame opening: 380 mm Table surface: 940 x 910 mm Clear hole in table: 770 x 190 mm Table height above floor: 1,180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Hsdpfxjvuua Nj Af Teng Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standard With infinitely variable three-phase motor drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Mechanical roller feeder Bruderer BBV 205/120, driven via main shaft/universal shaft of the press Guethle CK support arms An optional soundproof booth can be offered – price upon request.

Stanje: rabljeno, Hymmen CombiCoater ELX-S 1400 coating line with UV dryer. - Technical data will follow shortly Hnjdpfxolf H Tce Af Tjg - For self-dismantling and self-collection.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.04-00054, Oprema: Na voljo je tipska ploščica, Rabljeni ekstruder Bellaform, tip: BH45-30D, letnik 2013 s polžem mere 45 mm - 30 l/d, hitrost vrtenja polža pribl. 160 obr/min z vodno hlajenim servomotorjem 30 kW, z menjalnikom cilinder s 4 ogrevalno/hladilnimi conami in vodno pušo v območju dovoda materialni lijak plus dozirni polž COLORTRONIC za masterbatch en senzor tlaka taline Hnedouxa Abspfx Af Tsg krmilna omara integrirana v ogrodje stroja, s povsem novim PLC in z novim zaslonom na dotik za enostavno in intuitivno upravljanje ta ekstruder je bil funkcionalno preizkušen! Dimenzije: pribl. 195 x 70 x 200 cm (D x Š x V z lijakom)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 400 mm, pomik po osi Z: 240 mm, skupna masa: 6.000 kg, največja hitrost vretena: 42.000 obr/min, 5-Axis HSC Milling Machine Röders RXP500DSC with linear direct drives on all axes and torque drives on the rotary axes. The machine is being completely overhauled, tested, and calibrated in our facility. The machine will meet new machine tolerance standards! Travel distances: X 450 mm, Y 400 mm, Z 240 mm Spindle/Table distance: approx. 315 mm - Linear direct drives on all axes – wear-free - 19-position tool changer Hsdpfx Astt Argsf Tjng - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring, including tool cleaning before measurement - Hand control unit - Remote maintenance capability - Automatic 3D probe including calibration ball in the tool changer - Minimum quantity lubrication - Emulsion cooling - HSK40E spindle with max. 42,000 rpm - Spindle length compensation - EROWA zero-point clamping system integrated into the machine table - Manual chuck control - Automation package for retrofitting the machine with a pallet changer - Hand control unit Viewing the machine in ready-to-operate condition is possible at any time. For more information about the nature and scope of our overhauled machines, please visit our website or our Hüttmann YouTube channel.

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut Hedpfeqwyclsx Af Tjng - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Hjdjhigmbspfx Af Teng Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation Hnedpocggy Sjfx Af Teg - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° Hjdpswhmdfofx Af Teng - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) Hsdou Afu Rjpfx Af Tong 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Leto izdelave: 2024, Stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Hjdpjhx Elfsfx Af Teng Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.