Industrijski drobilnik ali mlin

HABERMEHL Anlagenbau GmbH EH 400/1

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), A shredder manufactured by Gross Apparatebau GmbH, previously used in the wood industry, is available. Feed opening (X/Y): 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm–40mm, extraction nozzle diameter: 160mm, machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation is available. On-site inspection possible. Codou Nlkxopfx Agujgu

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel Csdpfxehx Elfs Aguogu The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: dober (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, HITRI DVOKRATNI HLADNI STISKALNICI NATIONAL M5 Za proizvodnjo delno preluknjanih delov Popolnoma delujoča Pravkar servisirana! Nova električna napeljava. Število matric: 1 Število kosov na minuto: 300 Dolžina zakovice: 20 mm Globina preboja (max): 5 mm Premer reza: 5 mm Tlorisna širina: 1.300 mm Tlorisna dolžina: 2.690 mm Moč glavnega motorja: 7,5 KW Neto teža: 3.100 kg Csdjtxni Nspfx Agujgu Bruto teža: 3.700 kg.

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naš kompaktni ekstruder model EX20-25d Proizvajalec: PMH GmbH Premer polža [mm]: 20 Dolžina polža [L/D]: 25 Hitrost vrtenja polža [min-1]: 10–192 Polž: nitriran Navor: 55 Nm Pogon: trifazni motor s frekvenčnim pretvornikom Pogonska moč [kW]: 1,1 kW Material cilindra: nitriran Električne priključne vrednosti: 3 / N / PE Csdpfoq R Tkwex Agusgu Napajalna napetost [V]: 400 V pri 50 Hz Krmilna napetost [V]: 24 V Keramični grelni trakovi [W]: 1200 W Število grelnih trakov: 3 Maksimalni iztis: pribl. 5 kg/h Maksimalna procesna temperatura [°C]: 300

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Cgjdpfx Agog U Uv Reuju Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 7.010 h, moč: 198 kW (269,20 KM), proizvajalec motorjev: John Deere, vrsta prenosa: samodejen, vrsta goriva: dizel, največja hitrost: 40 km/h, prva registracija: 02/2019, barva: originalen, skupna masa: 16.000 kg, velikost sprednje pnevmatike: 610/70R30, velikost zadnje pnevmatike: 710/70R42, skupna višina: 3.800 mm, skupna širina: 3.000 mm, število prejšnjih lastnikov: 1, Oprema: dodatne luči, greljenje sedeža, hidravlika, hladilnik, kabina, klimatska naprava, osvetlitev, spojka prikolice, sprednja priključna naprava, sprednji priključni vrat, tempomat, vozilo za nekadilce, zadnja priključna gred, zapora diferenciala, zavorni sistem na stisnjen zrak, Nous vendons notre tracteur John Deere 7270 R. La machine est très bien entretenue et en parfait état technique. Codpfjyx Arasx Agujgu Équipement : - Ultimate Edition - Transmission AutoPowr 40 km/h, à variation continue - Écran Command Center 10 pouces avec fonction vidéo - Récepteur Star Fire - AutoTrac - JD Link - Processeur Command Center 4600 - Cabine CommandView III en finition Premium - Pack radio Premium - Pack éclairage Premium - Pack confort en cuir avec siège chauffant - Réfrigérateur - Rétroviseurs extérieurs réglables électriquement - AutoPowr avec inverseur à gauche - Pompe hydraulique 223 l/min - 5 distributeurs super deluxe à double effet - PDF arrière 540E / 1000 / 1000E - Relevage arrière 7 847 kg, Cat III - Attelage 3-en-1 avec crochet automatique et boule K80 - Load Sensing - Relevage avant avec PDF avant 1000 tr/min - Essieu avant intégral TLS Plus - Essieu arrière à voie réglable 120 mm - Antidémarrage avec clés codées - Joystick multifonction électrique - Masses de roues arrière, jantes en fonte Le turbocompresseur a été remplacé en octobre 2025.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, CNC Vertical Machining Center MIKRON VCP 800 W With Heidenhain iTNC 530 path control Year of manufacture: 2002 Travel paths: X 800 mm, Y 650 mm, Z 500 mm Spindle speed range: 0 – 20,000 rpm, stepless Including the following accessories: Cgodpfeviq U Eex Aguou Rigid angle table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully enclosed cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area (BLUM laser) 3D infrared touch probe Renishaw Chip conveyor Coolant system 4 adjustable leveling machine feet Operating manuals

Leto izdelave: 2005, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Parallel twin-screw extruder WEBER DS 8.5 - Manufacturer: WEBER - Model: DS 8.5 - Year of manufacture: 2005 - Twin parallel screws, diameter 85 mm, 17 L/D - 5 heating zones on the barrel + 2 cooling zones - 5 die heating zones - Motor power: 56 kW Cgsdpfeuziyhjx Agueu - Up to 150 kg/h profile – 230 kg/h pipes Very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Wide slot die Serial No.: L 1081-041391 // Smoothing unit Serial No.: F 1201-041392 Take-off unit Serial No.: F 1201-041392-T Max. winder speed: 50 m/min. Type: Film line with 1080 mm usable width Equipment / Further details: Max. gross PP output up to 1000 kg/h with film width up to 1200 mm Special feature: winder system allowing the slitting of narrow films (150 mm - 100 mm) or, for example: 8 x 175 mm or 2 x 700 mm A die lip for maximum film thickness up to 2 mm, up to 1000 kg/h. Total power consumption: 211 kW/h Main motor capacity: 250 kW Min. film thickness in PS: 0.68 mm / Min. in PP: 0.75 mm Cgedpfx Agjw Tbr Houju Maximum calender speed: 50 m/min mechanically possible Consisting of: - Maguire 5-compartment dosing unit - Extruder (screw dia. 160 mm) Amut EA 160 // Year: 2003 - Screen changer (for cleaning in food production) - Melt pump - Wide slot die (1 insert) 120 cm - Die lip for film thickness up to 2 mm, up to 1000 kg/h - Calender 140 cm - Thickness gauge SBI TMD-EC/140.20.200.R - Post-cooling rollers (4 pcs.) - Winder (film buffer during roll change) - Cutting machine & film haul-off - Film winding unit (3 pcs.) - Mill MAZZA CBS 25 40 2T18 // Year: 2003 Complete available infrastructure: control cabinets, pumps etc.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, We offer Atlas Copco compressors Model: GA 55 Pressure: 10 bar Motor power: 55 kW Year of manufacture: 2000 Compressor complete with documentation Codswa Iz Aepfx Agujgu We also carry other compressors from Atlas Copco, Kaeser, and Mahle