Stiskanje furnirja

Baioni 3500x1300

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg Gjdpfx Aednxydsb Eetw * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Gtsdpfxjrigxye Ab Eew Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers - Trim saws for precise end cutting - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit The machine is equipped with NC cutter control and a pneumatic package. Gjdpfx Abot Hxxpj Eetw - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min The machine is well-maintained and in very good condition.

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Gsdpjwt Snysfx Ab Ejtw Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. Gtjdpfx Asw I Uxcob Esw The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 Gtedpsfzzhysfx Ab Ejw - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: novo, Dimensions (LxWxH): 2480 x 1230 x 65 to 105 Gtjdpfx Abjfk Ah Ns Ejw Width: 1230 Length: 2480 Weight approx.: 675 kg The welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, working with electrically powered tools, or working with chemical and oily substances. The tables are equipped with transport rods in the base rails, allowing them to be easily moved using a pallet truck and quickly adjusted in height to match other work surfaces. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights available on request). The solid steel worktop, up to 20 mm thick, can withstand heavy impacts or blows—such as those that occur frequently when working with heavy hand tools or handling very heavy metal workpieces or tools—without causing permanent deformation or indentations. The metal worktop allows for unrestricted use of magnetic clamps to fix components in place. Thanks to its high dead weight, this universally applicable table offers excellent stability against tipping, even when loaded with heavy items or tools at its highest working position. For accessories and further information, please follow this link:

Stanje: rabljeno, številka stroja/vozila: 008365, Pozicija 1: Enostranski stroj za lepljenje robov BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Pozicija 2: Povratni transport za plošče BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Godpfjx Swf Uox Ab Eetw

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Gtsdpfx Abjvymdqj Esw Edge feed for coil and strip material Jointing unit with 2 milling heads Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Max. edging overhang per side: 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 1994, obratovalne ure: 62.058 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 099314, širina bale: 770 mm, višina bale: 520 mm, Proizvajalec: COMDEC - PAAL Model: LV2020PFT Serijska številka: 099314 Leto izdelave: 1994 Gtodpfet Ucqfex Ab Esw Maksimalna zmogljivost: 25.000 kg/h Dimenzije izhoda bale: 77 cm x 52 cm Stiskalnica je delovala do zaustavitve proizvodne linije.