Elektronski modul

Bachmann Battenfeld CPPV 200 K B 2525/00

Stanje: novo, Leto izdelave: 2025, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor Chsdpfx Afsk H Ic Ujqof with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Leto izdelave: 2024, Stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Codpfjhx Elfex Afqohf Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Leto izdelave: 2000, Stanje: rabljeno, Speed: 227 rpm, Power: 31 kW, Heating capacity: 7.8 kW, Length: 1952 mm, Width: 840 mm, Height: 1920 mm, Weight: 820 kg. Chedsduyyzspfx Afqjf

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Cjdpeg Emvhefx Afqjhf Screw diameter: 30 mm Shot weight: approx. 90 g

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, - Single-screw extruder - 25/25 L/D screw - Motor: 2.2 kW - Slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) Chjdpforg Ebcsx Afqef - Winder / take-off unit - Control system

Stanje: novo, Leto izdelave: 2025, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Chjdpfx Aei Dfidjfqjf Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Our belt puller can be built in various sizes. 40–80 m/min Contact length: 170 mm to 800 mm Chsdpfx Aehd Ndxefqof MADE in GERMANY

Leto izdelave: 1998, obratovalne ure: 64.082 h, Stanje: dober (rabljeno), This Cincinnati extruder is currently stored at Plastima Used Machinery’s facility. The machine dates from 1999. Special note: the extruder is missing the gearbox. – Brand: Cincinnati Chodpsq Tr T Rofx Afqof – Model: Titan 45R-APC – Year of construction: 1998 – Conical twin-screw extruder – Screw Ø: 45 mm – Operating hours: 64,082

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Zapiralna sila: 220kN, minimalna višina orodja: 200mm, maksimalni hod odpiranja: 200mm, maksimalna razdalja med ploščami: 400mm, hod izmetalca: 80mm, dimenzije stroja (D/Š/V): cca 2600mm/800mm/1600mm, teža: cca 760kg. Ogled na lokaciji je možen. Chodpfxow R Dg Us Afqjf

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), VACUUM CALIBRATION TANK LÜERS VT 125-1-6 Chamber: 1 Pipe diameter: max. 125 mm Csdpsiidm Tofx Afqehf Length: 6 meters Feed: electric, forward and reverse Year of manufacture: 2000 Material: stainless steel (VA)