REZERVOAR ZA KALIBRACIJO VAKUUMA LÜERS VT125-1-6

LÜERS VT 125-1-6

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Fedpfx Ajiyyf Ieplegb Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: dober (rabljeno), Gardner 800l trakasti mikser 800-litarski trakasti mikser, jednostruka osovina, unutrašnjost od nehrđajućeg čelika, poklopac s preklopom, ispustni kanal, trofazni motor. Fodpfxolcdz Ho Aplsgb

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm Fedehy Tp Djpfx Apljgb The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel Fgodohx Elfspfx Apljb The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Leto izdelave: 2000, stanje: rabljeno, Speed: 227 rpm, Power: 31 kW, Heating capacity: 7.8 kW, Length: 1952 mm, Width: 840 mm, Height: 1920 mm, Weight: 820 kg. Fgjdsduyyzepfx Aplob

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Fjdjg Emvhepfx Aplsgb Shot weight: approx. 90 g

Stanje: skoraj kot novo (rabljeno), The MSP 120 ZK is optimally suited for the crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip briquetting press and a pre-installed crusher, precisely matched to each other. This system enables the size reduction and compaction of chips generated by turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolants (coolant emulsion, oil) absorbed during previous machining processes. The system consists of a feed hopper into which the material to be processed is loaded, and an integrated shredder that reduces the chip length. A conveyor system continuously and gradually feeds the shredded chips into the hopper of the chip press via a conveyor belt. There, two augers transport the material into the compaction chamber. The system features a monitored liquid collecting tank and a pump. The cooling fluids can be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device can be added for manual loading if required. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette Ø: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400 V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Knives replaceable: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen size: 20 mm Hopper diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380 V Fgsdpfxsw R Rano Apljb Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured lacquer RAL 7035 light grey

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Boy 30 T2 Fgodpouh U Izefx Apljb Schließkraft: 30 Tonnen Baujahr: 1992 Schnecke: 32 Schussgewicht: 123 g

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Product-contacting parts are made of stainless steel 1.4571, the remainder of the used mixer dryer is constructed from 1.4301. Machine designation: Used Continuous Horizontal Mixer Dryer Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of manufacture: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Design: EExdellCT4 Total capacity: 235 litres Product-contacting parts: stainless steel 1.4571 Features: double jacket, mechanical seal Fodpfx Apsitcu Eslegb Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1,600 kg Technical documentation: Yes Note: Operating temperature 130°C, design temperature 200°C, mixing vessel internal pressure -1/+3 bar, double jacket pressure +6 bar Accessories: base frame Condition: used Price: on request

Leto izdelave: 2007, stanje: zelo dobro (rabljeno),