CNC stružnica

Böhringer VDF 250 Cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 480 mm, • Turret overhauled in 2021 • Coolant pump with increased pressure/delivery rate installed in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robotic cell Control system: CNC control incl. Siemens 840 D color display TECHNICAL DATA Max. swing diameter: 550 mm Max. turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single-stage): 30 – 4000 rpm Turret: Number of stations: 12 (6 of which are driven) Tool shank holder: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure incl. work area lighting  Automatic power-driven sliding door  C axis Gsdpfevr Tkzox Afqeil  Tailstock programmable drag, incl. various center points  12-position drum turret  Driven turret configuration  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. three-jaw chuck Schunk Rota NCF 315  1 pc. three-jaw chuck Schunk Rota NCF 250  1 pc. two-jaw chuck Schunk Rota NCF 250  1 pc. WTO slotting head  2 pcs. driven tools CAPTO-axial tool  2 pcs. driven tools CAPTO-axial radial tool  3 pcs. driven tools CAPTO-radial tool  7 pcs. static tool holders  Mounting elements  Documentation

Stanje: dober (rabljeno), Leto izdelave: 2001, Dear Sir or Madam, We hereby offer you a used 5-axis CNC machining centre "DECKEL MAHO" DMU 50 eVo, in good condition. Gedow Axahopfx Afqeil

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 3.000 mm, premer struženja: 480 mm, največja hitrost vretena: 3.550 obr/min, hod vretena: 100 mm, premer struženja nad ležiščem sani: 520 mm, TECHNICAL DETAILS Turning length: 3,000 mm Recommended chuck outer diameter: 250–315 mm Swing diameter over bed: 520 mm Gedpfx Aeww E I Isfqsil Max. turning diameter over cross slide: 480 mm Plan traverse: 435 / 405 mm Travel of cross slide: 3,176 mm Cutting tool shank height: 25 mm Round shank holder diameter: 50 mm Spindle nose with centering cone (DIN 55026): Size 8 Spindle bore: 78 mm Spindle diameter at front bearing: 120 mm Drive power (max.): 53 kW Max. torque: 630 Nm Speed range: 37–3,550 rpm Speed control: Infinitely variable Max. feed rate: 10,000 mm/min Rapid traverse speed: 10 m/min Max. feed force / drilling force: 15 kN Tailstock quill outer diameter: 100 mm Tailstock quill stroke: 100 mm Max. quill force: 14 kN MACHINE DETAILS Drive power: 53 kW at 50% duty cycle Approx. machine weight: 15,600 kg Bed design: VDF slant bed with drip tray EQUIPMENT - Compound bed construction: Meehanite cast iron bed with reinforced concrete base - High rigidity and damping - 3-point leveling, no foundation required - Unobstructed chip flow due to 20° slant on guideway cover - Wedge-shaped cross slide for heavy-duty machining - Automatic lubrication system with reservoir

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 480 mm, • Turret overhauled in 2021 • Coolant pump with higher pressure/delivery rate installed in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic part loading via robotic cell Control: CNC control including color display Siemens 840 D TECHNICAL DATA Max. swing diameter: 550 mm Max. turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12 (6 driven) Tool shank holder: 40 mm Speed range (2-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) FEATURES/ACCESSORIES  Full enclosure including work area lighting  Automatic, power-operated sliding door  C-axis  Tailstock programmable drag, incl. various live centers Giodpfxjwwkx Ee Afqjl  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Automation interface  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. three-jaw chuck Schunk Rota NCF 315  1 pc. three-jaw chuck Schunk Rota NCF 250  1 pc. two-jaw chuck Schunk Rota NCF 250  1 pc. shaping head WTO  2 pcs. driven tools CAPTO-axial tool  2 pcs. driven tools CAPTO-axial radial tool  3 pcs. driven tools CAPTO-radial tool  7 pcs. fixed tool holders  Mounting elements  Documentation

Stanje: dober (rabljeno), Leto izdelave: 1989, obratovalne ure: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed/ways cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range, longitudinal and facing: 0.5 – 5,000 mm/min Rapid traverse, longitudinal + facing: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Gsdpfx Afjvr Eh Ejqjil Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT screen General Description: CNC manual input control system with program input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu navigation and plain text display of all functions. Control keyboard, screen, and handwheel are housed in a separate chip protection cover. The EPL control offers the following features: Programs can be entered and edited directly by the operator via the EPL control without manual program preparation. NC programs in ISO/EIA format can be entered, output, or directly input manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, facing, and contour turning, including stock allowance. Thread cutting. Undercuts as per DIN 509 Form E and F and DIN 76, grinding allowance programmable. Axial and radial grooves according to DIN 471 and 472, including bottom finishing. Radii 90° and chamfers 45°. Automatic cutter radius compensation for cycles, undercuts, grooves, radius, and chamfering. Programming: Block-oriented, metric/inch, diameter in absolute input, radius in incremental input, full circle programming, subprogram technique, skip levels for program sections. Zero offset. Operating mode selection via menu. Program input and output: Menu-guided dialogue with operator prompts or direct dialogue. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged belt chip conveyor • 12-station VDI 40 turret, 6 standard tool stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric footswitch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, največja hitrost vretena: 3.000 obr/min, premer struženja nad ležiščem sani: 480 mm, model krmilnika: Siemens Sinumerik 840C, TEHNIČNI PODATKI Dolžina struženja: 1.000 mm Premer obhoda nad ležiščem: 550 mm Premer obhoda nad vozičkom: 480 mm Revolver: 12-pozicijski Število gnanih postaj: 6 Vpenjanje: VDI50 Območje vrtljajev: 30 - 3.000 vrt/min Prehod vretena: 90 mm PODATKI O STROJU Krmiljenje: Siemens Sinumerik 840C Mere & Teža Mere (D x Š x V): 580 x 270 x 270 cm Teža: cca 11 t OPREMA Giedpfoxtmvcsx Afqol Močnostna vpenjalna glava SMW Autoblok 315 (brez mehkih čeljusti) Pribl. 10 gnanih orodij Pribl. 10 koničastih konic za konjiček

Stanje: dober (rabljeno), 16 pieces external turning tool holders 41 pieces internal turning tool holders Gsdpfxeikn E Ho Afqsil

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Siemens Sinumerik 840D control system Bar capacity: 65 mm Gisdpowh U D Hefx Afqsl Spindle speed: 5,000 rpm 2 x 12-station turrets with driven tools Turret 1 with Y-axis Parts catcher Band filter system Chip conveyor IRCO Profimat bar feeder

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Z dvema obdelovalnima moduloma, X-os: -50 do 725 mm, Y-os: -200 do 300/ -250 do 250 mm, hitro pomikanje X-, Y-, Z-osi: 18/12/30 m/min, krmiljenje: Siemens Sinumerik, temperaturno območje: 5-40°C, vrsta toka/frekvenca: 3 PEN/50Hz, nazivna napetost: AC 400V, krmilna napetost: DC 24V, pomožna napetost: AC 230V, priključna moč: 102 kVA, nazivni tok: 148A, nazivni tok (hiter): 148A, varovalka (počasna): 160A, dolžina: 8000 mm, širina: 3000 mm, višina: 4000 mm, teža: cca 17 t, stanje delovnih ur: cca 80.000 h. Stroj je popolnoma funkcionalen, kroglično vreteno (obtočno vreteno) Z-osi je bilo obnovljeno leta 2024, redno vzdrževan. Z dokumentacijo, razdelilno omaro, hidravličnim agregatom, filtrskimi elementi in transporterjem za ostružke. Ogled na mestu je možen. Gjdpfx Aswbuyzsfqeil

Stanje: dober (rabljeno), Leto izdelave: 2004, TRAUB TX8H CONTROL Weight: 3500 kg Dimensions (LxWxH): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5600 / 4000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> Suitable for chip-forming metal and plastic machining with defined cutting edges using appropriate tools. --> For clamping in jaw chucks from size 160 up to approx. 250. --> For machining bar stock up to a diameter of 42 or 65 mm, respectively. --> With special EHS version workpiece removal unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle head DIN 55026, size: A5 --> Chuck diameter: 160-175 mm / 200-250 mm Godpfxowwl Iuj Afqsil --> Max. turning diameter: 275 mm --> Clearance above spindle center: 35 mm --> Max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool Carrier Tool holders for cylindrical shank DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time, 1st position: 0.5 sec. --> Indexing time, each subsequent position: 0.15 sec. --> Feed Drives X-Axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> Rapid traverse/Path speed: 15 m/min --> Z-Axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 18 m/min --> Y-Axis: --> Slide travel: ±35 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 10 m/min --> C-Axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electronic resolution: 0.001 degree --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid retraction travel: 280 mm --> Quill clamping force at 55 bar: 8600 N --> Mounting per DIN 228: Mk 4 --> Steady Rest Clamping range: 8 - 95 mm --> Parts Removal Device Max. part length: 250 mm --> Max. part weight: 3 kg