Vrtljiva rezkalna glava

Bäuerle SFM 200

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Motor 5 kW Vreteno za rezalnik, nastavljivo za -5 do +45 stopinj Višinska nastavitev vretena 130 mm Smer vrtenja vretena: v desno / v levo Število vrtljajev: 3000/4500/6000/9000 vrt/min Višinska in nagibna nastavitev z motorjem Podaljšana različica mize: 2.000 mm z izvlečno podporo Lsdpsz D A Sfefx Al Rjrt Integrirana opora z napravo za podajanje s 4 valji

Stanje: novo, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Saw spindle diameter: 30 mm Lrsdpjv S Uz Ijfx Al Rot Scoring blade diameter: 120 mm Scoring spindle diameter: 20 mm Scoring unit on separate motor Manual height adjustment of saw blade Tilting saw blade from 0° to 45° Manual tilt angle adjustment of saw blade Carriage length: 3,200 mm Carriage lock Worktable dimensions: 1,450 mm x 1,030 mm Table height: 920 mm Table extensions: 2x Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Overall dimensions: Length: 3,430 mm Width: 1,900 mm Height: 1,560 mm

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle Ledpfxsh Nvyze Al Rjrt -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW Lsdpfx Ajhlp D Nol Rert The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1300 x 2070 x 1135 mm Weight: 320 kg Total power requirement: 2.2 kW 5-in-1 Combination Machine K5 250-1300 Saw-Moulder-Surface Planer-Thicknesse-Mortiser Circular Saw: - Max. saw blade diameter: 254 mm - Saw blade bore: 30 mm - Speed: 4750 rpm - Saw blade tilting: 0°-45° - Max. cutting height at 90°/45°: 75/60 mm - Sliding table: 430 x 1300 mm - Motor power / input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Spindle Moulder: - Spindle diameter: 30 mm Ledpfxjvz E Sio Al Rert - Spindle speed: 6500 rpm - Spindle length: 80 mm - Max. spindle stroke: 80 mm - Max. table opening: 144 mm - Motor power / input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Surface Planer and Thickness Planer: - Cutter block diameter: 75 mm - Cutter block with 3 knives - Speed: 4000 rpm - Feed rollers diameter: 32 mm - Max. planing width: 250 mm - Max. stock removal, surface planer: 5 mm - Fence tilt: 0°-45° - Max. thicknessing width: 248 mm - Max. stock removal, thicknesser: 2.5 mm - Max. workpiece height, thicknesser: 190 mm - Feed speed: 8 m/min - Surface table size: 1085 x 256 mm - Thicknessing table size: 600 x 248 mm - Motor power output / input: 1.5 / 2.2 kW - Voltage: 400V / 50Hz - Dimensions: L=1300 mm, W=2070 mm, H=1135 mm - Table height: 850 mm - Weight: 320 kg

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Lodpfxsiidm Ns Al Rjrt Location: ex stock 54634 Bitburg - available immediately -

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina transportnega traku: 615 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 07/2027, električna varovalka: 16 A, širina odpiranja: 30 mm, delovna širina: 615 mm, vrsta vhodnega toka: trifazni, Valjar za testo Fritsch Rollfix 5/630 Comfort za vse vrste testa za valjanje in laminacijo ročni nadzor robustna tehnologija izvedba iz nerjavečega jekla mobilni valjar za testo z ročnim in nožnim upravljanjem priključek 400V, vtikač 16A-CEE rabljeni stroj, obnovljen Možnosti: Lredpfx Ajyw El Tsl Rot pogodba o vzdrževanju škatla z rezervnimi deli servisni paket dostavna storitev uvajanje in zagon

Stanje: rabljeno, - Polavtomatski delilniki testa za okrogle ali kvadratne kose od 1.490 € Lsdpfx Asxvyymel Rsrt - Polavtomatski delilnik testa s kvadratno posodo, 20 delov; cena: 1.490 € - Polavtomatski delilnik testa za okrogle kose, 20 delov, blagovna znamka: Lambert; cena: 1.990 € - Polavtomatski delilnik testa za okrogle kose, 20 delov; cena: 1.990 € - Polavtomatski delilnik testa, 24 delov, blagovna znamka: Bertrand Puma; cena: 2.490 € - Polavtomatski delilnik testa za okrogle kose, 24 delov, blagovna znamka: Bertrand Puma; cena: 2.490 € - Polavtomatski delilnik testa za okrogle kose, 20 delov, blagovna znamka: JAC; cena: 2.490 € - Polavtomatski kvadratni delilnik testa, 20 delov, blagovna znamka: PANIRECORD; cena: 2.490 € - Polavtomatski delilnik testa za okrogle kose, 20 delov, blagovna znamka: JAC; cena: 2.500 € - Polavtomatski delilnik testa z okroglo posodo, 20 delov, blagovna znamka: PANIRECORD; cena: 2.500 € - Polavtomatski hidravlični kvadratni delilnik testa JAC DIV 20, rabljen, blagovna znamka: JAC; cena: 2.600 € - Delilnik testa, 20 delov, kvadratni DIVITRAD, blagovna znamka: Bertrand Puma; cena: 3.900 €

Stanje: rabljeno, Drilling capacity steel/CI: 15 mm Spindle taper: 1 Morse taper Throat: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Required space: 850 x 420 x 1860 mm Lrsdpfx Aevxpp Hsl Rot Weight: 220 kg

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, 1. Wyrówniarka (Jointer) – Szerokość wału: 260 mm – Długość stołów: 1560 mm Lredpfeqwg Efsx Al Rot 2. Grubościówka (Thickness planer) – Maksymalna grubość obrabianego elementu: 180 mm 3. Wiertarka (Drilling machine) – Maksymalna średnica narzędzia: 18 mm – Maksymalna głębokość wiercenia: 80 mm – Szerokość wiercenia: 140 mm – Stół regulowany w płaszczyznach góra/dół, przód/tył oraz bocznie 4. Piła tarczowa (Circular saw) – BRAK PIŁY (Saw blade not included) 5. Frezarka (Spindle moulder) – Średnica wrzeciona: 30 mm – Wrzeciono regulowane STAN I KOMPLETNOŚĆ JAK NA ZDJĘCIACH Condition and completeness as shown in the photos.