Pritrdilna plošča

aus Guß 2000 mm x 315 mm

Stanje: dober (rabljeno), Litoželezni podstavek – talna plošča Uporabna površina (D x Š x V): 3600 x 1200 x 300 mm 4 T-utorji: širina 44 x 26 mm Pgjdpfsh Auahox Agpjw Opremljena z nivelirnimi nogami Teža: pribl. 3 t

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) Podpfxsfgyico Agpsgw * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, The Sinus 330/2000 D is an impressive universal lathe from KNUTH’s range of conventional lathes, distinguished by its high-precision and high-performance construction. Featuring a heavy, one-piece cast machine bed and a removable bridge, it enables machining of large workpieces with diameters of up to 1,035 mm. The manual disc clutch ensures powerful drive transmission between the motor and spindle, while the hardened bed guideways guarantee high accuracy and smooth running even under intensive cutting conditions. Standard equipment includes, among other things, a 3-axis position display, various chucks, and a taper turning attachment. Additionally, the machine offers increased efficiency and safety during operation thanks to its well-conceived safety features and rapid traverse on two axes. Discover the possibilities of the Sinus 330/2000 D and request a quote to secure this high-performance universal lathe for your turning needs. Pgodpfx Agju E Nhgjpjw

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds Pgsdpfjt U Rm Isx Agpow - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Stanje: novo, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw Blade Size ----- 3770 x 34 x 1.1 mm Saw Speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ---- 290 mm / 250 x 250 mm INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guidance with carbide guides Hydraulic quick-release vice Coolant pump Hydraulic drop-down cylinder Motor overload protection switch Pgodsga Tzxopfx Agpow Automatic cut-off

Stanje: rabljeno, Workpiece weight: 100 kg Workpiece length: 1000 mm Diameter: 500 mm Centre height: 280 mm Total power requirement: 2.5 kW Podpfxsv Nq Swe Agpegw Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1 x 1.6 m

Stanje: dober (rabljeno), Vpenjalna plošča s T-utorom in križno mizo, ploščno polje, varilna miza, plošča za vrtalni stroj, T-utorna plošča, izmenjevalnik palet Psdpfx Aed Ehfljgpogw - Količina: na voljo je še ena 2. plošča ID21153 - Širina: 1465 mm - Dolžina: 4930 mm - Delovna višina: 860 mm - Debelina plošče: 35 mm - Višina plošče: 315 mm - Plošča z ojačevalnimi rebri - Širina utora: 51 mm - Razmik utorov: 292 mm - Transportne dimenzije: 4930/1640/V860 mm - Teža: 6155 kg

Leto izdelave: 1981, Stanje: rabljeno, številka stroja/vozila: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel: 28 mm - Thread cutting device - Drill spindle taper: MT 3 - Drill spindle travel: 160 mm - Table dimensions: approx. 750 x 500 mm - Arm reach: up to approx. 620 mm - Vertical travel of arm: 600 mm - Column diameter: 250 mm - Spindle speeds in 12 steps: 80 – 2800 rpm - 3 feeds: 0.1 / 0.15 / 0.25 mm/rev - Drill spindle drive: 400 V / 5.5 kW Pjdeb Ennkopfx Agpogw - Coolant system - Required space: approx. W 1100 x H 1550 – 2150 x D 950 mm - Weight: approx. 1200 kg - Operating manual

Stanje: dober (rabljeno), Clamping Plate with T-slots, Plate Field, Welding Table, Plate Boring Mill, T-slot Plate -T-slot Plate: Clamping plate with solid base frame -Length: 3000 mm Podpekrgiqefx Agpsgw -Width: 2000 mm -Plate: with support ribs -T-slot width: 28 mm -T-slot spacing: 200 mm -Overall dimensions: 3000/2000/H800 mm -Weight: 4500 kg

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti Delovna širina: 20 do 300 mm Delovna višina: 8 do 120 mm Hitrost podajanja: 6 do 46 m/min Močan pogon (15 kW) 9 vreten Izboljšana zvočna izolacija Sestava: Spodnje vreteno 11 kW, premer 50 mm Desno vreteno 11 kW, premer 40 mm Levo vreteno 11 kW, premer 40 mm Zgornje vreteno 11 kW, premer 50 mm Spodnje vreteno 11 kW, premer 50 mm Zgornje vreteno 11 kW, premer 50 mm Spodnje vreteno 11 kW, premer 50 mm Zgornje vreteno 11 kW, premer 50 mm Spodnje vreteno 11 kW, premer 50 mm Stroj prodan z vhodno mehanizacijo: verižni transporter 6000 x 2500 mm Posebna konfiguracija, idealna za izdelavo parketa in talnih desk Moč in motorji Napetost: 400 V Priklop: trijfazni Skupna moč: 114 kW Motor: 9 x 15 KM Skupne dimenzije Dolžina: 5200 mm Pedpfxjr Av T He Agpsgw Širina: 2200 mm Višina: 1800 mm