Dvižna miza z valjčnim transporterjem

Minda

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2025/002, Finger jointing system, finger jointing systems Finger jointing line, finger jointing machine MACH I -L- simply the best Wood remains stationary, the tools move Availability is extremely high > Excellent finger profile milling quality and optimized cutting speed > Long service life of milling tools / mini finger cutters > System noise is relatively low or, compared to individual milling machines by Weinig-GRECON, the MACH I is exceptionally quiet The MACH I is the only package system worldwide that can also process individual boards or beams. Fjdpfx Anjcbyp Notjgd Finger jointing system for vertical and horizontal milling, finger joint profiles – together with newly developed clamping stations and the transfer channel on the milling carriage, the MINDA - MACH I offers the following groundbreaking advantages: high cycle rate combined with a 1200 mm milling channel at 40 mm wood thickness, throughput approx. 150 linear meters/min; very reliable material transport – no failure-prone conveyor rollers, no V-belts, flaps, or cross conveyors – extremely high availability; suitable for all cross-sections including square timber; thanks to fully automatic and continuous channel adjustment, milling of single pieces is possible in extreme cases, making the system exceptionally flexible. Performance with KVH 160 x 280 mm is 38 lm/min, with KVH 100 x 300 mm is 64 lm/min, and with BSH 45 x 250 mm is 110 lm/min. MACH I -L- simply the best state-of-the-art technology made very simple

Stanje: rabljeno, Leto izdelave: 2019, MAKSIMALNI PREMER SEKANCEV: 250 MM MOČ MOTORJA: 75 kW Fgsdpfx Asyffi Tjntod ŠIRINA BOBNA DROBLILNIKA: 640 MM PREMER VALJA DROBLILNIKA: 660 MM ŠIRINA ZGORNJEGA VALJA: 640 MM NAJVEČJA ODPRTINA ZGORNJEGA VALJA: 600 MM NOŽI NA STROJU: 3 PODAJALNI VALJI: 2

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2022-04, Stroji za čepno spajanje, čepni stroj, linija za čepno spajanje Linija za finger-joint pakete lesa - Vhodna dolžina lesa: 300 - 3000 mm - Maksimalna višina rezkanja: 250 mm - Les miruje, orodja se premikajo - Zmogljivost pri debelini lesa 25 mm: 72 kos/min - Zmogljivost pri debelini lesa 35 mm: 51 kos/min > preprosto najboljši sistem finger-joint < Fgjdecbyqfspfx Antod Dobavni rok približno 10 mesecev Proizvajalec in dobavitelj: MINDA Industrieanlagen Za več informacij pošljite povpraševanje

Stanje: rabljeno, Poševno dvigalo Fsdpfeq Edyrox Antegd Dvigalo za prvo nadstropje Za transport desk na višino enega nadstropja

Leto izdelave: 2025, stanje: novo, The RS-9 has been specifically developed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine with which it will be used. The shredder enables fast and safe shredding of paper, which can be taken directly from the die-cutting machine, allowing for easy transport to the baler via a conveyor system. The RS-9 shredder is designed to reduce waste from a die-cutting machine for straightforward transport via a belt system. Our shredder is simple to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 also features retractable shafts, ensuring worker safety and extending the service life of the device. The machine is fitted with a frequency inverter that allows for soft starting and precise motor control. Feel free to contact us. Fgodpfx Aeiklxbjntod

Stanje: rabljeno, Price on request. Comprising: Minda quality sorting line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in shelving) Cross-section: max. 80 x 260 mm = 208 cm² Capacity of vacuum stacking with lifting column: Section I: 3 layers/min Section II: 2 layers/min Fjdpewwg Amjfx Antsgd Finger jointing by Grecon Destacking, planing line, and transverse transfer platforms by Minda

Stanje: zelo dobro (rabljeno), Image 1 is the manufacturer’s sample image. The remaining images are originals. Manufacturer: Minda Model: Timper Press V 200 Technical Data: Main pressing force from below: Fjdpfx Aehtd E Ajntjgd Number of pressing chambers: 2 Maximum lamella width: 270 mm Maximum glulam length: up to 18 m Glulam profile: straight Side alignment of lamellae: included Press system: hydraulic Permanent pressure control: included Bundling: separate Loading / unloading: in longitudinal direction

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Fgsdpfx Aex D H Hcjntsd Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, CLT BSP production line with CNC machining center Capacity: approx. 25,000 m³/year in 2-shift operation Functional Description / Scope of Supply: - Infeed for longitudinal lamellae: loading – singulation - Infeed for cross lamellae: loading – vacuum destacking – feeding to planing machine - Formation and buffering of longitudinal layers: preparation of longitudinal layers and removal station - Formation and buffering of cross layers: 2-level cross layer buffer – cross layer removal station - Lay-up and glue area: vacuum lay-up gantry – adhesive application gantry – lay-up table - BSP press: TimberPress X331 - Outfeed section after BSP press: cross transfer carriage to buffer stations, Reichenbacher system and removal station with turner - Reichenbacher CNC machining center BSP blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Fodpfx Ajxzy N Sontsgd Max.: 12,040 x 280 x 50 mm Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available upon request.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Fgsdpjhlp Efofx Antsd