520C-200-675

ARBURG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, needle type, proportional valve controlled x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mold height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter Rotary table diameter: 1200 mm Rotary table available at additional cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic) Travel strokes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot available at additional cost Dimensions: Weight: 21,000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Gsdpjzc N U Isfx Aa Usuc Price: On request

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 106.864 h, vpenjalna sila: 1.300 kN, premer vijaka: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on time. Good condition, fully functional Still in operation until week 11 Godpfx Aasrp Dyro Ueuc Additional service reports and documents available Technical Specifications: Year of manufacture: 2003 Automatic operation: 106,864 hours Clamping force: 1,300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve at the injection unit for particularly high dynamics and reproducibility of the injection process. The back pressure is regulated, and the nozzle contact force is manually adjustable. - VE 557/00 AES Energy-saving system for automatic power optimization, enabling corresponding energy savings by continuously adjusting the pump drive speed to the power requirements of each injection cycle. - VE 460/00 ED Electromechanical dosing drive via a speed-controlled three-phase asynchronous motor. This improves productivity through simultaneous movements, gentler material preparation, and further energy savings compared to hydraulic dosing. On request and at an additional charge, loading and transport (Europe-wide) can be organized. Prices plus VAT Inspection by appointment possible. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For additional information or to get in touch, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of Manufacture: 2011 Injection Unit: Screw Diameter: 60 mm Shot Weight: 607 g Injection Pressure: 2,000 bar Dosage Volume: 664 ccm Clamping Unit: Clamping Force: 320 t Tie Bar Distance: 0x0 mm Platen Size: 1,510 mm Gusdpfx Aezc N Unsa Uoc Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating Hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Controller with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened – bimetallic Main machine motor – servo motor driven by inverter Highly precise rotary table, driven by servo motor and controlled by inverter Rotary table diameter: 1,500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor – mold pressure control Conversion of the injection unit for vertical operation is possible Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in a live technical test at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Gjdpfx Aaezc N Ubj Ueuc Injection unit hardened – bimetal Machine equipped with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine features a system for setting the minimum mould height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes are driven by servo motors (electric); C axis – pneumatic Axis stroke: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Arburg injection molding machine from 2000. 130 tons clamping force. The machine is delivered fully reconditioned at our facility in Heras (Cantabria). New seals installed in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm Guodpfxjrxtpdo Aa Usc MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm DISTANCE BETWEEN TIE BARS: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ INJECTION SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface 6x air valves 4x hydraulic core pulls with proportional valve control Hot runner control Hardened injection unit - bimetallic Proportional valve on the injection unit – precise dosing Machine with two cylinders / battery with compressed nitrogen (extra capacity for fast operation) Gsdpozc N T Rjfx Aa Ujuc Machine is designed for operation with an electric rotary table. The machine is equipped with an inverter for servo motor control on the rotary table and an interface for rotary table connection Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/PS Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); Axis C and A movement Axis travel: X-550, Y-1400 (telescopic), Z-3500 Touch panel control Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor at extra cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of technical tests of the selected machine, or participate in live technical demonstrations at our facility in Łódź. Price: on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Arburg 570C 2000-350/150 / Production Line with Side-entry Arburg Multilift Robot / 2K-Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 40 mm Shot Weight: 153 g Injection Pressure: 2120 bar Dosage Volume: 182 ccm Clamping Unit: Clamping Force: 200 t Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA Additional Equipment: Production line with side-entry Arburg Multilift robot 2K machine / two-component Air valve x 1 Hydraulic core pull x 5 Hot runner control Reinforced injection units – bimetallic Proportional valves on injection units – precise molding Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up and tested by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Gusdpfjzc N Twjx Aa Ujc Price: On request

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 83.000 h, premer vijaka: 50 mm, skupna masa: 7.400 kg,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Metering volume: 154 cm³ Clamping Unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Gsdpfx Ajzc N Tqoa Ueuc 2K injection moulding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot-runner control x 12 Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charging for high-speed operation) The machine features a servo motor integrated in the injection unit for dosing the plastic material Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm – 77 g/PS Integrated Arburg brand conveyor belt and sorting chute Original Weber brand rotary table, highly precise – electrically driven (inverter integrated in the machine) Rotary table and robot available at additional cost Dimensions: Weight: 8140 kg Length/width/height: 4.81 x 1.84 x 3.45 m All offered machines are commissioned by our service technicians before sale. Video of technical tests for the selected machine is available upon request, or you may participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Gedpfjzc N Tkex Aa Ueuc Air valve x 3 Hydraulic core pull, controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units - precision moulding Machine with two cylinders/batteries with compressed nitrogen (additional charge for rapid operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Purchase of rotary table at extra cost Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); C-axis and A motion Travel on axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package Robot with adapter, protective housing Purchase of robot at an additional cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Leto izdelave: 1998, obratovalne ure: 62.144 h, stanje: pripravljen za uporabo (rabljen), Clamping force: 2000 kN, tie bar spacing: 520 mm/520 mm, platen dimensions X/Y: 715 mm/715 mm, minimum mould installation height: 250 mm, maximum opening stroke: 650 mm, ejector stroke: 225 mm, ejector force: 66 kN. Screw diameter: 55 mm, shot weight: 240 g, injection pressure: 2500 bar, stroke volume: 286 cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600 mm/1700 mm, weight: approx. 7000 kg, operating hours: approx. 62,144 h. Documentation available. An on-site inspection is possible. Expected to be available from June 2025. Guedpjv Ifwxsfx Aa Ujc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 520H 1500-290 e² / hibridni stroj / proizvodna linija s stranskim robotom Wittmann W818 / obratovalne ure: 21.588 h v avtomatskem načinu Leto izdelave: 05.2016 Vbrizgalna enota: Premer polža: 30 mm Vbrizgalna teža: 97 g Vbrizgalni tlak: 2500 bar Dozirni volumen: 106 ccm Zapiralna enota: Zapiralna sila: 150 t Razmak med stebri: 520x520 mm Dimenzije vpenjalnih plošč: 695x695 mm Izmetalec: električni Zapiralni sistem: kolenčasti vzvod Krmiljenje: SELOGICA - zaslon na dotik Dodatna oprema: Stroj v zelo dobrem tehničnem stanju Hibridni stroj: visokohitrostni, varčen z energijo in zelo tih Obratovalne ure: 21.588 h v avtomatskem načinu Euromap 67 Vmesnik za robota 5-kratni zračni ventil Krmiljenje za vleko jedra 3-kratni zračni vleki jedra Vbrizgalna enota ojačana - bimetal Glavni motor stroja - servo motor z inverterjem - varčevanje z energijo Vbrizgalna enota poganja servo motor, ki ga krmili inverter Godpfx Ajzc N Tdea Ujuc Stroj z jeklenko / baterijo stisnjenega dušika (dodatno za hitro delovanje) Centralno mazanje Samodejna nastavitev višine orodja Paralelna gibanja Robot Wittmann W818 Leto izdelave: 2016 4-osni robot: 3 osi poganjajo servo motorji (električni): X, Y, Z; os C - pnevmatska Hodi v oseh: X-420, Y-1000, Z-1500 Krmilna enota na dotik Varnostni paket za robota Robot z adapterjem, transportnim trakom z električno nastavitvijo višine, zaščitnim ohišjem Nakup robota in transportnega traku za doplačilo Dimenzije: Teža: 6250 kg Dolžina/širina/višina: 4,45x1,56x2,21 m Vsi ponujeni stroji so pred prodajo zagnani in testirani s strani naših serviserjev. Možen je ogled videoposnetka tehničnega preizkusa izbrane naprave ali sodelovanje pri tehničnih preizkusih v živo v našem podjetju v Lodžu. Cena: na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 cc Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Godjzc N Syjpfx Aa Ujuc Control: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter - energy savings Injection unit driven by a servo motor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional capacity for fast operations) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure control The injection molding machine operated in a so-called “clean room” and is equipped with additional protection against contamination as well as two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company premises in Łódź. Price: On request

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Installation height min./max.: 250mm/750mm, Opening stroke: 500mm, Clamping force: 1500kN, Screw diameter: 40mm, Tie bar spacing: 420mm, Injection volume: 182cm³, Operating hours: 98,234h. Documentation available. An on-site inspection is possible. Gjdpfx Ast E Trhja Ueuc

Stanje: zelo dobro (rabljeno), Arburg 520H 1500-800 e² / Hybrid Injection Moulding Machine / Production Line with Arburg Multilift H Side Robot Year of manufacture: 2013 Guedezc N Smjpfx Aa Uec Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 cm³ Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - bimetallic Main motor of the machine - servo motor with inverter drive - energy saving Injection unit driven by servo motor controlled by an inverter Machine equipped with cylinder / battery charged with compressed nitrogen (additional loading for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor – mold pressure control The injection moulding machine operated in a so-called “cleaning room”, equipped with additional protection against contamination and two fume absorbers Side robot Arburg Multilift H Year of manufacture: 2013 5-axis robot: Z-axis driven by servomotor (electric); X-, Y-, and B-axis (rotation) pneumatic Safety package for robot Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt possible at extra charge Dimensions: Weight: 6680 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request