Orodja za vrtanje

ARBOGA A2508 M

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Godst Tqrnspfx Afqjbg Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter

Stanje: novo, Electric voltage: 400 V Frequency: 50 Hz Number of phases: 3 Weight: 486 kg Godpfxsd R Uz To Afqjbg Blade dimensions: 2700 x 27 x 0.9 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard Gbjdpjvdal Ajfx Afqeg X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), 1 used low-pressure steam boiler Gjdonp Hwkjpfx Afqjbg ----- Manufacturer : LOOS, Gunzenhausen Model : U-ND Capacity : 800 kg/h Perm. operating overpressure : 1 bar Test pressure (elevated) : 2 bar Total volume : 1,108 l Year of manufacture : 2004 CE marking : 0036 Equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, gas control section, control cabinet with touch panel, and all existing coarse and fine fittings. Boiler body dimensions approx.: Diameter incl. insulation : 1,230 mm Width : 1,450 mm Transport height : 2,200 mm Length : 1,940 mm Overall length incl. burner: 2,700 mm 1 used feed water module ----- Manufacturer : Loos, Gunzenhausen Model : WSM Capacity approx. : 800 l With control cabinet, sample water cooler, 2 dosing vessels

Stanje: novo, Saw blade diameter 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160x90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80x100 mm Total power requirement 1.8/2.5 kW Machine weight approx. 0.2 t Space requirement approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) Gbodpfxjd Iin Ts Afqeg • For miter cuts left and right up to 45°, end stop at 90° and at 45° left • For cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vise with quick-clamping lever, longitudinally adjustable jaw, adjustable guide, and double clamping arm for burr-free cuts • Cone safety clutch made of hardened steel to protect the saw blades • Large base plate made of solid cast iron for maximum stability and vibration-free sawing • 2 speeds: 30 + 60 rpm • High-performance special gearbox with elastic coupling for heavy-duty applications • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in handle with restart interlock • Length stop, assembly tools ATTENTION: Price does not include saw blade!!!

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Gsdpet Hxamjfx Afqebg Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: novo, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Gbjdjga Tzxjpfx Afqjg Saw Blade Size ----- 3770 x 34 x 1.1 mm Saw Speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ---- 290 mm / 250 x 250 mm INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guidance with carbide guides Hydraulic quick-release vice Coolant pump Hydraulic drop-down cylinder Motor overload protection switch Automatic cut-off

Stanje: dober (rabljeno), Drilling capacity in steel (diameter): 25.0/30.0 mm Throat depth: 260 mm Quill stroke: 120 mm Spindle speed range: 80–1400 rpm Gsdpjuhhzhefx Afqjbg Table clamping surface: 410 x 390 mm Total power requirement: 0.8/1.5 kW Machine weight: approx. 250 kg Space requirement: approx. 0.75 x 0.6 x 1.15 m

Stanje: novo, Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 160 mm Spindle taper: MT 4 Table: 500 x 420 mm Column diameter: 120 mm Speed range: 85 - 1800 rpm Feeds: 0.1 - 0.2 - 0.3 mm/rev Total power requirement: 0.85 / 1.5 kW Machine weight approx. 500 kg Dimensions (L x W x H): 965 x 515 x 1920 mm Godpfx Afsfv H H Heqsbg High-quality pillar drilling machine for industrial applications. The machine is also suitable for multi-shift operation. - Thread cutting attachment max. M20 - Precisely adjustable drilling depth stop - Work table height adjustable via rack and hand crank - Base plate with T-slots - High concentricity accuracy < 0.02 mm - Robust, high-performance drive motor - Digital speed display - Automatic feed

Stanje: novo, The KNWP 50 M is a precision workshop press in the Workshop Presses category and belongs to the group of manual workshop presses. These high-quality hydraulic presses, manufactured in Europe, are ideal for general assembly and straightening work as well as for testing workpieces. They offer safety and professional handling, making them the perfect choice for mechanical workshops, garages, and metalworking shops. The KNWP 50 M is designed for repair and assembly tasks such as pressing in and out bearings and straightening shafts. The machine features a maximum pressing force of 50 t and a total ram stroke of 160 mm. Thanks to its well-engineered design, it enables both manual and foot operation, as well as a height-adjustable worktable system and a multifunction die for straightening flat material. Invest in this robust and powerful workshop press from KNUTH and equip your workshop with professional-grade equipment. Order now! Gbsdpfx Aeuyh Twsfqjg