Enostebrna ekscentrična stiskalnica, ekscentrična štanca,

AMBOLD WMW AUE PEEV 25.2

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine Hedpfxsi Eg Nks Al Dou - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps - Knurling die: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1308 kg

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 Clamping plate: 570 x 450 x 65 mm Total connected load: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control (Balluff) - Control cabinet with touchscreen Hodpjb U Hwtofx Al Deu - Height-adjustable table - Foot switch

Stanje: novo, Tubend aluminium circular saw / under-table saw AC 550 Special equipment included in the price: - Pneumatic vertical and horizontal clamping via 4 clamping jaws - Infinitely variable saw blade feed - Minimum quantity lubrication system - 3m roller conveyor Description: Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting capacity at 90° (rectangular): 260 x 200 mm Cutting capacity at 90° (square): 155 x 155 mm Hjdpfxskckx Uj Al Dju Cutting capacity at 45° (rectangular): 180 x 200 mm Cutting capacity at 45° (square): 130 x 130 mm Operating pressure: 6 – 8 bar Operating voltage: 380 V Total power requirement: 3 kW Machine weight: approx. 250 kg

Leto izdelave: 1998, stanje: dober (rabljeno), številka stroja/vozila: 0159488169537, Offer 23293 Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel 9 mm - or with special punching tool: up to 100 mm Ø in steel 2.5 mm - Stroke adjustable: 0 to 28 mm (stepless) - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm Hedpjpuy H Dsfx Al Dou - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - Incl.: - Foot switch - Centre-point finder - Support table with foldable stops W 1100 x D 850 mm - Stop travel from centre of punch - Width between left/right approx. 470 mm x D 510 mm

Stanje: rabljeno, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Stroke rate: 120 strokes/min Ram adjustment: 55 mm Ram surface: 290 x 210 mm Ram bore: 40 H7 mm Through-hole in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m Hedpfx Aecp Apyel Dju - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Mechanical overload protection in ram (shear plate) - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Hodpfx Alob U Hwns Deu Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m Hsdpfjb U Hwmjx Al Dou - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Leto izdelave: 2026, stanje: novo, TNDG ročni pozicioner z ročnim kolesom in pnevmatsko zaponko. Merilni prikaz prek linearnega dajalnika in digitalnega prikaza. Na voljo v dolžinah 3, 4, 6 in 8 metrov Delovna višina: 800-1050 mm Dovoljena obremenitev: 70 kg/m Mere valjev: 40x300 mm EMBALAŽA IN MERE: Hodpfx Alepa Nzys Dju TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) Veselimo se vašega sporočila! Plantec Maschinen GmbH

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 480 mm, pomik po osi Z: 310 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, poteza s peresom: 120 mm, skupna višina: 1.820 mm, skupna širina: 1.780 mm, skupna dolžina: 1.400 mm, širina mize: 500 mm, dolžina mize: 900 mm, teža obdelovanca (maks.): 190 kg, razdalja od mize do središča vretena: 390 mm, Oprema: dokumentacija / priročnik, Table surface (swivel table): 900 x 500 mm Max. workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Travel Z: 380 mm Quill travel Z1: 120 mm Speed range: 40 - 2000 rpm Gear steps: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1,560 kg Hsdshu Rwfjpfx Al Deu including extensive standard accessories, such as: Work area enclosure 3-axis digital readout CONTUR Hydraulic tool clamp for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, incl. hydraulic unit Monitored spindle guard 3 pcs. conventional handwheels Complete electrical equipment for three-phase 400 V, 50 Hz Ball screw spindles for X, Y, and Z axes Vertical milling head Fixed swivel table, 900 x 500 mm clamping surface Swiveling mechanism for vertical milling head LED machine light Protective bellows for vertical and horizontal guideways Automatic central lubrication for axes and ball screw spindles Coolant system with pump Set of 4 mounting elements Including tool holder package consisting of: 1 x ER40 collet chuck 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Stanje: dober (rabljeno), Leto izdelave: 2010, premer žaginega lista: 250 mm, skupna masa: 130 kg, vhodna napetost: 380 V, moč hladilne črpalke: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Model: HU 250 DV Year of manufacture: 2010 Voltage: 400 V, 50 Hz Mounted on stand, swiveling head, quick-release clamp. 2-speed motor Hedotwdvispfx Al Dsu Coolant system with pump Saw blade dimensions: 250 x 32 mm Cutting capacity at 45° (rectangular): 50 x 60 mm Cutting capacity at 45° (round): 65 mm Cutting capacity at 45° (square): 55 mm Cutting performance at 90° (rectangular): 55 x 95 mm Cutting capacity at 90° (round): 70 mm Cutting capacity at 90° (square): 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg