Stroj za vrtanje stebrov

ALZMETALL AX 3s iTRONIC

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, skupna višina: 2.797 mm, skupna masa: 1.570 kg, This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating probe head and the VAST XXT TL3 sensor, enabling scanning speeds of up to 150 points/second. Ideally suited for precision measurements with a maximum workpiece weight of 730 kg. Consider the option to purchase this ZEISS Contura 7/10/6 RDS CMM. Contact us for further information about this unit. Additional information: • Maximum workpiece size: approx. 1344 x 910 x 716 mm • Maximum workpiece weight: 730 kg • Table height: 850 mm • Equipped with vibration damping system Fpedpfx Absx D Ngfsved • Sensor system: • Swivel head: Tilt ±180°, rotation in 2.5° increments • Scanning speed: up to 150 points/second • Max. stylus length: 150 mm • Max. stylus assembly weight: 15 g • Min. stylus tip diameter: 0.3 mm • Accuracy (according to ISO 10360): • Length measurement error (E₀): 1.7 + L/350 µm (at 18-22°C) • Probing error (THP): 2.7 µm • Form measurement error (RONt): 1.7 µm • Repeatability (R₀): 1.2 µm • Control: ZEISS C99L • Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS • Control mode: Motorized / CNC • Interface: Ethernet, USB Performance: • Drive system: Motorized CNC • Traverse speed (axes): 0-70 mm/s • Max. vector speed: 465 mm/s • Max. acceleration: 1.85 m/s² • Scanning speed: up to 125 mm/s Utilities: • Power supply: 100-240V AC (±10%), 50-60 Hz • Max. power consumption: 800 VA • Typical power consumption: 200 W • Compressed air: 6-8 bar, pre-filtered, dry (ISO 8573-1 Class 4) • Air consumption: max. 120 Nl/min Ambient conditions: • Operating temperature: 18°C-22°C • Relative humidity: 30-60% (non-condensing) Compliance & Certifications: • Conforms to EC Machinery Directive 2006/42/EC • EMC Directive 2014/30/EU • Quality management: ISO 9001:2008 • Environmental management: ISO 14001:2004 • Accredited: ISO/IEC 17025:2005 Dimensions Machine depth: 1975 mm

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Fodogulr Hjpfx Abvepd Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Fpsdsd Hy Elepfx Abvod Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Fsdpsthd Shefx Abvjpd Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: rabljeno, Leto izdelave: 2004, Technical details: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle speed range: 63 – 3,150 rpm Stepless feed rate: 12–3000 / 6–1500 (Z) mm/min Fpodjk Hdu Dopfx Abved Quill stroke: 100 mm Head swiveling range: +/- 90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with linear control, mechanical handwheels, rotary tilting table +/- 45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Stanje: zelo dobro (rabljeno), Vollrath EFC 200 Ball Mill Wet and dry grinding Iron-free grinding with steatite balls Fsdpfx Absk D Dwtovspd Lining: hard porcelain Volume: 200 l Drive power: 1.4 kW Speed: 42 rpm Each unit consists of 3 ball mills mounted on a steel frame Very good, ready-to-use condition, straight from production!

Stanje: novo, Panel Saw ALTENDORF WA 6 - Exhibition Machine - manual height adjustment, double roller carriage, scoring unit, tiltable, outrigger table, angle-mitre fence, automatic brake, can be lowered below table height ----- Technical Specifications ----- tilt range: 0 - 45°, Fsdpfxsu R Sx Ee Abvjpd cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade diameter: 315 mm, mitre fence tilt range: up to 49°, speeds: 4,200 rpm, main motor power: 5.5 HP / 4.0 kW, scoring motor power: 0.5 HP / 0.37 kW, table height: 910 mm, dust extraction port Ø: 1 x 100 / 50 mm each, weight: 450 kg - new exhibition machine -

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 4 SV Machine No. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle mount: MK 4 - short quill Throat depth: 340 mm Quill travel: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, stepless Motor power: 2.3 and 3.4 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed selectable via 2 motor speeds and stepless adjustment through variator gearbox - Intermediate gearing with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev Fsden N Ekcjpfx Abvepd - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting system Required space (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg Good condition

Stanje: generalkompletno obnovljen (rabljeno),

Leto izdelave: 2001, stanje: generalkompletno obnovljen (rabljeno), Affordable MAZAK Laser Cutting System NTX48 1.5kW Year of manufacture: 2001 Very well-maintained, completely overhauled MAZAK laser machine with 1500W Sheet size: 2500mm x 1250mm Minimal installation footprint: 2.6m x 6m Small parts conveyor belt Fully enclosed machine cover Mild steel: up to 12mm Stainless steel: up to 6mm Plastic processing possible Incl. software Incl. warranty Incl. extraction system Incl. commissioning and training Fjdpfx Ashturcobvepd Machine can be tested under power! ===Optional: Fully automatic loading and unloading available===