Stroj za vrtanje stebrov AX3iTRONIC-V

ALZMETALL AX 3 iTRONIC-V

Stanje: novo, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 293 mm Drilling stroke: 120 mm Morse taper: 3 MT Table size: 515 x 360 mm Spindle speed: 80 – 1125 rpm Column diameter: 115 mm Thread cutting M 24 ST60 Thread cutting M 30 GG20 Feed: 0.10 + 0.20 mm/rev Hnodpfx Adexabyijkei Distance spindle / table: 117 / 701 mm Motor power: 1.0 / 1.6 kW Weight: 270 kg Machine height: 1,840 mm NEW ALZMETALL MODEL SERIES 7" TFT LCD display with touch function: * Setpoint spindle speed * Actual spindle speed display * Integrated drilling depth display * Touch zero point function * Virtual drilling depth scale in display * Machine status indicators and warning messages in display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU Equipment: - Thread cutting device * for thread cutting with stop * max. 6 threads/min (thread cutting performance depends on spindle speed) * Thread depth adjustable via depth stop * in TFT LCD display (3 tools) - Infinitely variable speed adjustment via control lever - Automatic spindle feed with overload protection - Spindle guard with electric interlock - Three separate buttons for clockwise, counterclockwise, and stop - Mushroom push-button (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counterclockwise operation via contactor control - Control voltage: 24 Volt - Protection class IP 54 - Finish: DD texture paint Signal White RAL 9003, PANTONE 7545c, black - Initial fill of machine oil: oil bottle supplied loose Including special accessories: - 25. Coolant system B.

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Hsdpfxsgulr He Adkeni Speed range: 120 - 1810 rpm Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: novo, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 293 mm Drilling stroke: 120 mm Morse taper: 3 MT Table: 515 x 360 mm Speed range: 160 - 2250 rpm Column diameter: 115 mm Thread cutting M 24 ST60 Thread cutting M 30 GG20 Feed: 0.10 + 0.20 mm/rev Distance spindle / table: 117 / 701 mm Motor power: 1.0 / 1.6 kW Weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL SERIES 7" TFT - LCD display with touch function: * Target spindle speed * Actual speed display * Integrated drilling depth indicator * Touch zero point setting Hedpfx Ajxab Nwjdkjni * Virtual drilling depth scale on the display * Machine status and warning indicators on the display * Service information * Operator language selectable: DE/EN/FR/ES/IT/NL/RU. Features: - Thread cutting device * for thread cutting with stop * max. 6 threads/min (thread cutting performance depends on spindle speed) * Thread depth adjustable via depth stop * visible on TFT-LCD display (3 tools). - Infinitely variable speed adjustment using control lever - Automatic spindle feed with feed overload protection - Spindle guard with electrical interlock - Three separate buttons for clockwise - counterclockwise - stop - Mushroom-type emergency stop button (latching) - Main switch, lockable - Clockwise and counterclockwise via contactor control - Control voltage 24 volts - Protection class IP 54 - Coating: DD textured paint Signal White RAL 9003, PANTONE 7545c, black - Initial machine oil filling: oil bottle supplied loose Including special accessories: - 25. Coolant system B.

Stanje: novo, As a machinery dealer based in Offenburg, we offer both new and used ALZMETALL bench drilling machines and column drilling machines. You can find an overview of our drilling machines on our homepage. If you have any questions, simply give us a call. Here we present the new series of ALZMETALL column drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V Column Drilling Machine Condition: NEW Standard Equipment: 7" TFT LCD display with touch function: - Manual input of target spindle speed - Display of actual spindle speed - Integrated drilling depth display with touch zero-point setting - Virtual drilling depth scale on display - Machine status indicators and warning messages on display - Service information - Selectable operator language: DE/EN/FR/ES/IT/NL/RU - Continuously variable speed adjustment via adjustment lever - Spindle guard with electrical interlock - Three separate buttons for forward, reverse, and stop - Mushroom-head emergency stop button (latching) - Lockable main switch - Forward/reverse operation via contactor control - Control voltage 24 V - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Technical Data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Hjdoxd Trlepfx Adkjni Drilling capacity steel E 335 (St 60) (mm): 40 Tapping capacity steel E 335 (St 60): M 24 Tapping capacity cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable throat (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Spindle-to-table distance (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: infinitely variable Speed range (rpm): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch for tapping function Further options available: - LED machine lamp - Coolant system B - Technology calculator integrated in display - Maximum drilling depth display Optional accessories: - Machine vice size 3 / 125mm BB type BON3 - Machine vice size 4 / 160mm BB type BON4 - Quick-action drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping possible upon request. Errors, changes, and prior sale excepted. Not the right machine? Please contact us for further options.

Stanje: skoraj kot novo (rabljeno), Stolpni vrtalni stroj Gillardon tip GB 30 V, hitrost vrtenja 60 -1800 obr/min, avtomatski pomik, zelo dobro ohranjen, vpenjalni stožec MK 3. Hsdsxpxbcopfx Adksni

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == Hnodjd Hy Eljpfx Adkei ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: rabljeno, prevoženi kilometri: 143.755 km, moč: 105 kW (142,76 KM), prva registracija: 10/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: siv, emisijski razred: Euro 6, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 1.900 mm, Oprema: ABS, filter saj, klimatska naprava, Used Vehicle * Vehicle No.: - 70 * Euro 6 green emission sticker * Sprinter 314 CDI new model, medium wheelbase, high roof panel van * Automatic climate control * 6-speed transmission * Reversing camera * Rear parking sensors * Cruise control * Multifunction steering wheel * 2 seats * Load compartment lining, floor and walls * 270° rear doors Hodpfxsw E Uy Ne Adkeni * Electric windows * Electric mirrors * Central locking * Airbag * ABS * ASR (traction control) * German vehicle, 2nd owner * Original mileage * !!! Optional: shelving system in load compartment available at extra cost !!! ---- -> Please note that inspection is only possible by prior appointment. Thank you for your understanding. -> Sale only to trade customers or for export. The above data, photos, and equipment list serve solely for the general identification of the vehicle and do not constitute guaranteed characteristics within the meaning of sale-of-goods law! All information and specifications are provided WITHOUT WARRANTY. Subject to changes, prior sale, and errors! The equipment list does not form part of the contract and must be checked in detail on site by each interested party before purchase. Subsequent complaints will not be recognized.

Stanje: dober (rabljeno), Leto izdelave: 1986, Offer 23389 Technical Specifications: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MT 3 - 4 feed rates: 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds (gear stages): 95 - 2000 rpm - Drill spindle stroke: 160 mm - Throat: 350 mm - Table with 3 T-slots, height adjustable: 340 x 320 mm - Table tiltable left and right - Max. distance table – drill spindle: 500 mm - Max. distance machined base plate – drill spindle: 1050 mm - Column diameter: 160 mm Hsdpfx Adsrckv Hekjni - Coolant system - Worklight - Drive: 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx.: 350 kg

Leto izdelave: 2024, stanje: novo, Make: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Hnodpjd R Er Djfx Adkei Operating hours: 0 Cutting angle: 1°30' Strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (LxWxH): 3200x2300x1350 mm Weight: 3780 kg Standard equipment: - EZM9910 control unit - Programmable backgauge range 750 mm via control unit - Plastic inserts for hold-downs - 1 side gauge and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Recirculating ball screw - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0–180° The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Additional machines are available and ready for demonstration at our Staufenberg location. Further information is available on request.

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. Hsdjiiv Ikjpfx Adksni • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.