Stroj za vrtanje stebrov ALZMETALL AB 34

ALZMETALL AB 34 iTRONIC

Stanje: novo, Drilling capacity in steel (diameter): 40.0 mm Drilling capacity in cast iron: 45.0 mm Throat depth: 300 mm Quill stroke: 160 mm Morse taper: 4 MT Table size: 615 x 430 mm Speed range: 100 - 1800 rpm Column diameter: 145 mm Thread cutting capacity M24 ST60 Thread cutting capacity M30 GG20 Feed rates: 0.1-0.2-0.3-0.4 mm/rev Distance spindle/table: 138 / 688 mm Motor power: 1.4 / 2.2 kW Weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL SERIES 7" TFT-LCD display with touch function: * Preselect spindle speed * Actual speed display * Integrated drilling depth indicator * Touch zero-point function * Virtual drilling depth scale on display * Machine status and warning notifications on display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU Equipment: - Thread cutting attachment * For tapping with depth stop * Max. 6 threads/min (tapping performance is spindle speed-dependent) * Thread depth adjustable via depth stop * On TFT-LCD display (3 tools) - Infinitely variable speed adjustment via adjustment lever - Electromagnetic feed clutch * With overload protection and electric * Comfort cross-handle operation * Selectable feed rates: 0.1-0.2-0.3-0.4 mm/rev - Spindle guard with electrical interlock - Three separate buttons for clockwise, counterclockwise, and stop - Mushroom-head emergency stop button (latching) - Main switch, lockable - Direction reversal via contactor control - Control voltage 24 V - Protection rating: IP 54 - Paint: DD textured finish, signal white RAL 9003, PANTONE 7545c, black - Initial machine oil fill: oil bottle, supplied loose Including special accessories: - 12. LED machine light - 24. Coolant system A* in machine base Isdpfx Ajxab Nkogpsa

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Technical Specifications: • Programmable guillotine cutter, Isdpfx Agswi Twhepea • Automatic straightening unit, • Sectional roller shears, • Labelling system, • Outfeed conveyor belt, • Control panel, • Useful sheet width: 1270 mm, • Straightening rollers: 6 units, • Number of blades: 5 pairs, • Blade type: stainless steel.

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier Iodpfxjulnb De Agpsa - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min. Isdpfsifk Rbox Agpja

Stanje: rabljeno, Leto izdelave: 1997, Krmiljenje Heidenhain 355 X-hod 850 mm Y-hod 550 mm Iodpfod N Smhex Agpsa Z-hod 450 mm Vpenjalo orodja SK50 Teža stroja cca 5,5 t +++++ Upoštevajte, da je stroj v razstavljenem in za nakladanje pripravljenem stanju. Zaradi tega demonstracija pod napetostjo ali izdelava videa nista možni. Naš oglas vsebuje najbolj reprezentativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: novo, Table diameter 315 mm Horizontal table load 50 kg Vertical table load 25 kg Chuck diameter 200 mm Speed 0 - 5 rpm, steplessly adjustable Swivel range 90 degrees Tilt adjustment: manual/motorized manual Isdpfji Hg I Dex Agpja Connection voltage 230 V Machine weight approx. 45 kg Space requirement approx. 800 x 600 x 600 mm Welding turntable with - Integrated stand and universal torch holder - Quick-action chuck 200 mm - Foot switch - Manually tiltable/swivable - Stepless speed adjustment

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Machine weight approx.: 8 t Required space approx.: 2.95 x 1.6 x 2.36 m Chuck diameter: 250 mm Swing diameter: 265 mm X-axis travel: 170 mm Iedpfx Aoizlh Hegpea Z-axis travel: 200 mm Spindle speeds: 1,500 rpm Spindle bearing diameter: 100 mm Pick-up machine *

Stanje: rabljeno, Suspended Crane Runway DEMAG Crane System Type KBK 1 Year of manufacture: approx. 2000 Single-girder monorail system with single-girder crane bridge Isdpshrkrtjfx Agpsa Light crane system made from KBK modular system profiles Load capacity: 125 kg Span: 5 meters Distance between longitudinal running rails: 4.1 meters Total length of longitudinal girder: 12 meters Cross traverse profile = KBK1 Longitudinal running rail profile = KBK1 Consisting of: 29 meters of KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 trolley for crane suspension 2 double trolleys for longitudinal running rails 10 screw clamps for crane suspension or ceiling mounting (without beam clamps) 6 end caps suitable for KBK1 running rails

Leto izdelave: 2022, Stanje: novo, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg - Workpiece diameter range: 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control Iedpfxsfxw H Aj Agpea

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. Iedpfx Asd Ixbzjgpsa The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.