Drsna namizna žaga

Altendorf F45 ElmoDrive

Stanje: rabljeno, Leto izdelave: 2023, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA23051204239033, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), širina reza pri vzporednem vodilu: 1.300 mm, glavni premer žaginega lista: 550 mm, dolžina odseka (maks.): 3.200 mm, dolžina mize: 840 mm, F45 Elmo Drive GM010.0407 Višina stroja 910 mm Upravljanje na višini oči Csdpfx Ageymdh Dstsha Dvosmerni nagib Maks. premer rezila 550 mm Motor 5,0 kW (6,8 KM) Vario Dvoosna predrezalna enota z dvosmernim nagibom LED osvetlitev Podaljšek mizne plošče 840 mm Dvojni voziček 3200 mm Kotna priprava DIGIT LD CNC vzporedno vodilo 1300 mm Sprednji podporni valj DUPLEX 1350 mm (2019)

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg Codpfx Agsv Erkaoteha - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), največja višina reza: 200 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.300 mm, dolžina pomične mize: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting capability + / - 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm travel - Mitre cross-cut fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Workpiece holder - On/off switch on the double roller carriage Cedjuh R R Eepfx Agtoha - Front support roller

Stanje: novo, Leto izdelave: 2025, Exhibition Machine Year of Construction: 2025 Features and Technical Data: - Base machine: DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply (UPS) (ZB27) - Touchtool for tool length measurement - 10.3 kW milling spindle - Drilling unit with 14 spindles - 1 additional processing area (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored lateral stops at the front Fields A + D in the X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, single-position aggregate magazine pivotable in X and Y directions for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h vacuum pumps, dry-running, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters of sealing cord - Laser pointer - red (single laser pointer) Field D (ZB8) for positioning vacuum cups or tracing the workpiece contour - Automatic central lubrication system - Vacuum cups for smooth table surfaces, complete 140x115 mm, height 30 mm with connection hose - Thin panel pusher as an addition to the standard pusher for special materials under 4 mm thickness and standard wood-based materials under 2 mm Cedpjxc Rmksfx Agtoha - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO – touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Dust extraction hopper at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV Csdjqlckpepfx Agtsha • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Formatna krožna žaga ALTENDORF F 35 Tip 3 - 1000 -razstavni stroj- 5,5 kW (7,5 KM), 3 hitrosti, Motorno nastavljanje višine in nagiba, Velik zaščitni pokrov, Dvojni voziček 3.200 mm, Predrezalna enota z LED osvetlitvijo, CNC vzporedno vodilo, širina reza 1.000 mm, Kotno-poševni prislon 3.450 mm, brez dolžinskega izravnave, Podaljšanje/razširitev mize, S kakovostno površino CDF ----- Tehnični podatki ----- Obseg vrtenja: 0 - 46 °, Dolžina vozička: 3.200 mm, Chjdpfxsw Impts Agtea Dolžina reza: 3.100 mm, Širina reza: 1.000 mm, Višina reza: 154 mm, max. Ø žaginega lista: 450 mm, Moč motorja: 5,5 kW, Velikost zaslona: 15 palcev, Višina delovne mize: 910 mm, Premer sesalne šobe: 80 + 120 mm - nov razstavni stroj -

Stanje: rabljeno, Debelinka Panhans 426 Širina skobljanja 630 mm Višina skobljanja 250 mm Električno nastavljanje višine preko pozicijskega krmiljenja TERSA varnostna skobeljna gred Miza vodena na štirih točkah Glavni motor 7,5 kW Chjdey Tu R Dspfx Agtja Podajanje 7 + 14 m/min. Segmentirana pritisna letev iz polnega aluminija Stroj je DELAVNIŠKO PREGLEDAN in v ODLIČNEM STANJU Stroj je priključen in pripravljen za demonstracijo v razstavnem centru Na zalogi v Liebochu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, - made of steel - filling weight: 8 kg Csdpfx Agsfpa Rpstjha - with glue gun and nozzle

Stanje: novo, Leto izdelave: 2023, RAZPRODAJA ZALOGE!!! Linvincibile SiX je najvišja serija formatnih žag. Glavna prednost je nagib žage v obe smeri (+/- 46°), Chjdpfxevzqdkj Agtsa podporna roka na močnih THK vodilih ter serijsko priložen ''FULL SUPPORT'' voziček z brezžično povezavo na novi 15'' displej EYE-S. O seriji formatnih žag L'invincibile ni kaj dosti za dodati. So vrhunske formatne žage, narejene po uporabnikovih najvišjih zahtevah! TEHNIČNE LASTNOSTI: - 550 mm žagin list - nagib v OBE smeri (+46° / -46°) - Inverter za vrtljaje motorja - Dolžina voza 3200 - Hitrost vrtenja predrezila 6000 - Širina odreza na desno vodilo 1500 - Predrezilo - moč motorja 0,9 - Predrezilo (mm) 160 - Moč motorja (kW) 9 - Hitrost vrtenja žage (obr/min) 2800 - 4200 - Maks. odrez pri 90°/45° 205 / 130 - Odsesovalni nastavki (mm) 1 x 120 / 1 x 100 !!! Cena ne vsebuje DDV !!! ne zagotavljamo servisa in montaže

Stanje: rabljeno, Leto izdelave: 1999, No. 3076 Chjdpfxeiyp D Ds Agtea STEGHERR NFT Cross Bar Groove Milling Machine Used, year of manufacture: 1999 Specialized milling machine for cutting a groove on the top side of pre-milled glazing bars. Automatic workflow: The pre-milled glazing bar is positioned against the stop and centered. The milling process starts automatically when the profile is pressed against the stop. The milling unit moves upward and then automatically returns to its starting position after the operation is complete. Milling motor: 400 V; 1.1 kW; 2.5 A Compressed air connection: 6 bar Machine is ready to connect. Includes mobile base frame. All technical details are subject to change and provided as per manufacturer’s brochure, without guarantee. Private sale; VAT cannot be shown. Collection in 73430 Aalen. Transport dimensions approx. 600 x 400 x 1500 mm (L x W x H) Weight approx. 60 kg To avoid misunderstandings, it is possible and recommended to inspect the machine on site by appointment. Sale as-is. Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. Sold as inspected. Pictures and videos are for reference only and do not represent the actual scope of delivery. Payment terms: Payment before collection or shipping. Delivery terms: Ex works location.