Drsna namizna žaga

Altendorf F 45 EvoDrive

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA16081201616308, dolžina rezanja (maks.): 3.000 mm, širina reza pri vzporednem vodilu: 1.300 mm, premer žaginega lista: 450 mm, dolžina mize: 840 mm, moč: 5,5 kW (7,48 KM), Oprema: dozator, vrtilna hitrost brezstopenjsko nastavljiva, Rabljeni stroji GM010.0398 Leto izdelave: 2016 F45 EvoDrive Upravljanje v višini oči Nosilec za predloge Maksimalni premer lista 450 mm Motor 5,5 kW (7,5 KS) VARIO 2-osna predrezna enota, enostransko nagibna RAPIDO, za 2-osni predrezovalnik enostransko LED osvetlitev pri predrezovalniku Dvojni voziček z dolžino 3000 mm TPL 840 mm Kotno vodilo 90° 3200 mm CNC vzporedno vodilo 1300 mm STEG/druga podpora na dvojnem vozičku Nedjw In H Hopfx Adpswp Laserski prikaz reza

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: mehanski, vhodna napetost: 400 V, potrebna višina: 1.200 mm, Edge banding machine equipped with: - Trimmers - Edging tape magazine - Interchangeable hotmelt glue pot for EVA or PUR - Flush trimming Nwedpfx Adowy Ugxopep - Corner rounders

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.200 mm, največja širina rezanja: 1.000 mm, največja višina reza: 150 mm, dolžina mize: 3.200 mm, Base equipment - Electromotive height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment, set via measuring scale, incl. manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Saw blade projection max. 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3/4/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control system - Electromotive height and tilt adjustment, also bilateral (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electromotive adjustment of the parallel fence* - Electromotive adjustment of the CNC angle fence UNO 90* - Automatic dimension correction for the parallel and angle fence when the saw unit is tilted - Digital speed display or stepless speed regulation (VARIO)* - Electromotive adjustment of the scoring unit, two or three axes* - Stepless fine control of the axes via +/- buttons - Control of the vacuum clamping system in the double roller carriage* - Simple axis calibration - Machine diagnostics Nwodpfx Adoxuqulspsp - Operating hours counter - USB interface - Retrieval of the last dimension entry (back function) - 99 storable cutting programs - Grooving: with automatic step-by-step positioning of the parallel fence until the groove is completed - Automatic conversion of tip-to-tip to flat-to-flat dimensions on the parallel and angle fence, taking material thickness and tilt angle into account - Bevel cut function with automatic calculation of missing angles or dimensions - Extended tool management · Storage of scoring position (3-axis scorer)* · Storage of base blade thickness and cutting width of the main tool · Storage of the main tool's speed · Max. 100 storable tools - Additional functions · Grooving: automatic step-by-step positioning of the parallel fence until groove completion · Chain dimension function: cutting sequences with identical spacing on the parallel fence, calculated on both sides relative to the saw blade · Angle cuts: removal of excess material creates the desired final size after inputting the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Template holder - Extended cutting height incl. tilting - 5.5 kW (7.5 HP) VARIO motor - 2-axis scoring unit - LED lighting - Double roller carriage with 3,200 mm length - On/off switch on double roller carriage - Digital angle and mitre fence L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina reza pri vzporednem vodilu: 1.300 mm, največja višina reza: 204 mm, glavni premer žaginega lista: 550 mm, vrsta nastavitve višine: električni, višina mize: 910 mm, dolžina pomika: 3.200 mm, moč: 5,5 kW (7,48 KM), Oprema: motorna zavora, vrtilna hitrost brezstopenjsko nastavljiva, Altendorf F45 EvoDrive Year of manufacture: 2023, new machine - Template holder at the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - 5.5 kW (7.5 HP) VARIO motor (stepless speed control) - Preparation for 2-axis scoring unit - Table extension 840 mm - Double roller carriage length 3200 mm - Mitre angle fence - CNC rip fence 1300 mm - Front support roller Nsdpfx Adsvw S Hfjpswp

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA20111490519800, dolžina rezanja (maks.): 3.000 mm, širina reza pri vzporednem vodilu: 1.000 mm, premer žaginega lista: 450 mm, dolžina mize: 840 mm, moč: 5 kW (6,80 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Rabljen stroj GM010.0348 Leto izdelave: 2020 F45 ElmoDrive Višina stroja: 910 mm Upravljanje na višini oči Nosilec za dokumente neposredno na upravljalni enoti Obojestranski nagib (+/- 46°) Maks. premer lista: 450 mm Motor 5,0 kW (6,8 KM) VARIO Priprava za 2-osni predrezovalnik Podaljšek mizne plošče: 840 mm Dvojni voziček z dolžino vozička 3000 mm Nedpfsw Intyjx Adpjwp Vklopni/izklopni stikalo na dvojnem vozičku Sredinski PQS Vzporedni prislon DIGIT X 1000 mm Sprednji podporni valj

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 5.000 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 450 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, Oprema: dozator, motorna zavora, osvetlitev, vrtilna hitrost brezstopenjsko nastavljiva, You can obtain all popular Altendorf models from F25, F35, WA80, F45, as well as the Hand Guard machine in all variations. Standard Features - Electromotive height and tilt adjustment - 0-46° with automatic cutting height correction during tilting - Overhead control panel, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm (other widths available upon request) - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Motor power: 4 kW (5.5 hp) at 4,000 rpm - AKE clamping system for main saw blade - Working height: 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed adjustment from 2,000 to 6,000 rpm - Accurate speed adjustment improves cutting quality and increases saw blade life Increased cutting height for single-sided tilting - This option is for single-sided tilting and is equipped with a large extraction hood for a maximum saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the maximum saw blade diameter is 500 mm and a cutting height of 179 mm. Only available in conjunction with at least 5.5 kW (7.5 hp) motor power. 2-axis scoring unit, one-side tilting - With electromechanical height and lateral adjustment, programmable scorer blade height with quick lowering and lifting. Drive motor 0.75 kW (1 hp), 8,200 rpm. Retrofitting only possible for machines prepared for scorer units. Nodpfxowf Hdge Adpowp LED illumination - Highly energy-efficient LED technology makes the risk area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked in any position without steps. Large double rollers, made of precision-hardened steel, keep the upper carriage precisely aligned with the lower carriage on hardened, chrome-plated guide rails. This running quality is maintained even after decades of heavy use and contamination. The carriage design uses a multi-chamber system that is extremely torsion-resistant and dimensionally stable. The table surface is precisely planed and anodized. A hardened, chrome-plated round bar is integrated in the upper carriage as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off switch on double roller carriage - The on/off switch on the double roller carriage is always readily accessible. The four buttons control both the main saw blade and the scorer. This saves time and increases safety. Angle-mitre fence, crosscutting up to 3,500 mm - This patented ALTENDORF fence with integrated length compensation simplifies precise cutting of angles and mitres in one operation. In both positions, the swivel angle is infinitely adjustable by up to 49° and displayed via scale. Contact us for your dream machine—we look forward to advising you! We are also happy to arrange inspections directly at the machine, at the factory, or with wood dust in the air.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16-08-12-016, dolžina rezanja (maks.): 3.000 mm, širina reza pri vzporednem vodilu: 1.300 mm, premer žaginega lista: 450 mm, dolžina mize: 840 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, V tovarni obnovljen F45 z EvoDrive krmiljenjem in dodatno opremo! TEHNIČNE PODROBNOSTI Maksimalna dolžina reza: 3.000 mm Širina reza pri vzporednem prislonu: 1.300 mm Premer žaginega lista: 450 mm Dolžina mize: 840 mm PODROBNOSTI STROJA Moč motorja: 5,5 kW OPREMA Nastavljiva hitrost vrtenja brez stopenj Predrezilo Nwedpjxc Ub Sefx Adpop 2-osna predrezovalna enota z nagibom RAPIDO za enostranski 2-osni predrezovalnik LED osvetlitev na predrezovalniku Dvojni voziček z dolžino 3.000 mm Kotno vodilo 90 - 3.200 mm CNC vzporedni prislon Most/druga podpora na dvojnem vozičku LASERSKI prikaz reže reza

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.200 mm, največja širina rezanja: 1.300 mm, širina reza pri vzporednem vodilu: 1.300 mm, največja višina reza: 200 mm, premer žaginega lista: 550 mm, moč: 5 kW (6,80 KM), dolžina pomične mize: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting capability + / - 45° - Cutting height 200 mm Nwedpfx Aeuh R R Ejdpjp - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm travel - Mitre cross-cut fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Workpiece holder - On/off switch on the double roller carriage - Front support roller

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Nwjdpfx Adsw I Uxcepsp Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Stanje: rabljeno, Leto izdelave: 2011, Použitý stroj Rok výroby: 2011 Stav: udržovaný Vybavení a technické údaje: Nwsdpfexymfqox Adpjp - Elektrické nastavení výšky a natočení - Ovládání přes displej s možností zadání rozměrů přes klávesnici - Vybavovací balíček F 45 III - Dvojitý pojezdový vozík s délkou vozíku 3000 mm - Šířka řezu 1300 mm – CNC - Rozšíření stolu, eloxovaný hliník - Pohonný výkon 5,5 kW VARIO s plynulou regulací otáček 2000–6000 ot./min. - Upínací systém AKE - Průměr pilového kotouče max. 500 mm, výška řezu max. 175 mm - Výškově nastavitelný a výklopný ochranný kryt včetně rameného držáku - Ovládací panel ve výšce očí - Držák obrobku - Trojosá předřezová jednotka RAPIDO Plus s elektrickým nastavením výšky, bočního posuvu a šířky předřezového kotouče, 0,75 kW - Prodloužení stolu 840 mm, eloxovaný hliník - Úhlově pokosový doraz Dostupnost: konec ledna 2026 Sklad: Hesensko