Drsna namizna žaga

Altendorf F45 EvoDrive

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.200 mm, največja širina rezanja: 1.000 mm, največja višina reza: 150 mm, dolžina mize: 3.200 mm, Base equipment - Electromotive height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment, set via measuring scale, incl. manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Saw blade projection max. 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3/4/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control system - Electromotive height and tilt adjustment, also bilateral (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electromotive adjustment of the parallel fence* - Electromotive adjustment of the CNC angle fence UNO 90* - Automatic dimension correction for the parallel and angle fence when the saw unit is tilted - Digital speed display or stepless speed regulation (VARIO)* - Electromotive adjustment of the scoring unit, two or three axes* - Stepless fine control of the axes via +/- buttons - Control of the vacuum clamping system in the double roller carriage* - Simple axis calibration - Machine diagnostics - Operating hours counter - USB interface - Retrieval of the last dimension entry (back function) - 99 storable cutting programs - Grooving: with automatic step-by-step positioning of the parallel fence until the groove is completed - Automatic conversion of tip-to-tip to flat-to-flat dimensions on the parallel and angle fence, taking material thickness and tilt angle into account - Bevel cut function with automatic calculation of missing angles or dimensions - Extended tool management · Storage of scoring position (3-axis scorer)* · Storage of base blade thickness and cutting width of the main tool · Storage of the main tool's speed · Max. 100 storable tools - Additional functions · Grooving: automatic step-by-step positioning of the parallel fence until groove completion · Chain dimension function: cutting sequences with identical spacing on the parallel fence, calculated on both sides relative to the saw blade · Angle cuts: removal of excess material creates the desired final size after inputting the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Template holder - Extended cutting height incl. tilting - 5.5 kW (7.5 HP) VARIO motor - 2-axis scoring unit Ffsdpfjxuqulsx Aflot - LED lighting - Double roller carriage with 3,200 mm length - On/off switch on double roller carriage - Digital angle and mitre fence L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical Specifications: Edge thickness (coil material): 0.4 - 3 mm (material dependent) Edge thickness (strip material): 0.4 - 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (limitations possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - 3-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence 1252 mm - I-Tronic package - Edge Control PPC 322 W controller Ffjdpfjxymd Tox Afljt - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy saving mode - Preparation for RETURN connection (third-party) - Guide system BS 501; precise 90° workpiece feeding for edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing unit FG201 with 2 cutting heads, 64 mm height - Edge feed MG 301 - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the glue jet nozzle - Includes vacuum pump for professional PUR adhesive processing. The PUR is deprived of the reaction partner (water molecules) by the vacuum pump, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates for any vacuum loss. Full control over PUR! - Pressure unit DW 301 with motorized NC axis; 1st roller driven with pneumatic dip control, 2 conical pressure rollers - GM301 spray unit after pressure station for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Profile trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Flat scraper FK702 - Complete separation and cleaning fluid spray unit - GM 301 spray unit after pressure station (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery. Availability: short notice Stock location: Hochheim

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 5.000 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 450 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, Oprema: dozator, motorna zavora, osvetlitev, vrtilna hitrost brezstopenjsko nastavljiva, You can obtain all popular Altendorf models from F25, F35, WA80, F45, as well as the Hand Guard machine in all variations. Standard Features - Electromotive height and tilt adjustment - 0-46° with automatic cutting height correction during tilting - Overhead control panel, swiveling - Double roller carriage, carriage length 3,000 mm Ffjdpfx Aswf Hdgjflst - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm (other widths available upon request) - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Motor power: 4 kW (5.5 hp) at 4,000 rpm - AKE clamping system for main saw blade - Working height: 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed adjustment from 2,000 to 6,000 rpm - Accurate speed adjustment improves cutting quality and increases saw blade life Increased cutting height for single-sided tilting - This option is for single-sided tilting and is equipped with a large extraction hood for a maximum saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the maximum saw blade diameter is 500 mm and a cutting height of 179 mm. Only available in conjunction with at least 5.5 kW (7.5 hp) motor power. 2-axis scoring unit, one-side tilting - With electromechanical height and lateral adjustment, programmable scorer blade height with quick lowering and lifting. Drive motor 0.75 kW (1 hp), 8,200 rpm. Retrofitting only possible for machines prepared for scorer units. LED illumination - Highly energy-efficient LED technology makes the risk area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked in any position without steps. Large double rollers, made of precision-hardened steel, keep the upper carriage precisely aligned with the lower carriage on hardened, chrome-plated guide rails. This running quality is maintained even after decades of heavy use and contamination. The carriage design uses a multi-chamber system that is extremely torsion-resistant and dimensionally stable. The table surface is precisely planed and anodized. A hardened, chrome-plated round bar is integrated in the upper carriage as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off switch on double roller carriage - The on/off switch on the double roller carriage is always readily accessible. The four buttons control both the main saw blade and the scorer. This saves time and increases safety. Angle-mitre fence, crosscutting up to 3,500 mm - This patented ALTENDORF fence with integrated length compensation simplifies precise cutting of angles and mitres in one operation. In both positions, the swivel angle is infinitely adjustable by up to 49° and displayed via scale. Contact us for your dream machine—we look forward to advising you! We are also happy to arrange inspections directly at the machine, at the factory, or with wood dust in the air.

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Fsdsw I Uxcjpfx Aflsft Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Μηχανή συγκόλλησης άκρων Hebrock F5 με σύστημα ελέγχου PLC, δοχείο ταχείας θέρμανσης με επίστρωση και χωρίς συντήρηση, με προκαταρτική ρύθμιση για γρήγορη αλλαγή δοχείου θέρμανσης. - Οθόνη αφής 10" - Μέγιστο πάχος ταινίας/άκρου: 3mm - Ελάχιστο μήκος τεμαχίου: 160mm - Ταχύτητα τροφοδοσίας: 7m/min - Έτοιμη προς λειτουργία σε περίπου 3,5 λεπτά - Μέγιστη κατανάλωση ισχύος: 7,4kW - Ηλεκτρική σύνδεση: 400V/3ph/50Hz - Ύψος τραπεζιού: 900mm Fjdpfxewyu Rwe Afloft - Διαστάσεις μηχανήματος: 4300x1300x1400 mm - Βάρος περίπου: 900Kg Επιπλέον εξοπλισμός • Κεφαλή προ-φρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Συνδυαστική κεφαλή κοπής • Ακτίνα για γωνιακό στρογγύλισμα R = 2mm • Στρογγύλισμα γωνιών R = 2mm • Συσκευή ταχείας αλλαγής για τον κινητήρα στρογγυλοποιητή γωνιών • Ξύστρα πολλαπλής ακτίνας R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Ψεκασμός προστασίας ακμής • Υποδοχές για τη φρεζαριστική μονάδα και τη ξύστρα προφίλ ακτίνας • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λωρίδα) • Εσωτερικός LED φωτισμός

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Ffodpfxspq If Ds Afljt Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) Fedpfx Afelht Hzeleft

Stanje: zelo dobro (rabljeno), Spodnji vretenasti rezkalni stroj Panhans 240A Premer vretena: 30 mm Dolžina vretena: 130 mm Spremenljiva hitrost vretena: 3000/4500/6000/9000 obr/min Fedpfx Aexg Iz Hefloft Elektronsko nastavljanje višine vretena Elektronsko nastavljanje omejevalnikov Elektronsko nastavljanje kota Štirivaljni potisni sistem SCM

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Features and Technical Specifications: Technical Specifications: Main saw blade diameter (mm): 550 Panel cutting capacity with extendable fence and sliding table: 3200 mm x 3200 mm Saw blade tilting range (degrees): 46 Max. saw blade cutting height at 90° (mm): 200 Max. saw blade cutting height at 45° (mm): 130 Saw blade rotational speed (rpm): 2500-3500-5000 Scorer unit speed (rpm): 8500 - Extraction nozzle diameter: - At the frame: 120 mm - At the saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scorer motor power [S6 -40%] Hz50 kW: 0.9 Max. rip capacity with parallel fence (mm): 1000 Standard Equipment and Accessories: - Optimisation/Workflow control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android operating systems. Activation is via a QR code supplied with the machine. The app enables: * Management of machine fleet, materials, and panel inventory * Creation and editing of projects; importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimisation of cutting lists by selecting one or more solutions suggested by the app's integrated optimisation software * Accurate machine setup for each cut using simple, intuitive 3D sequence graphics that guide the operator step-by-step * Printing barcode labels for part identification via Bluetooth connection to compatible label printers - 10-year warranty on sliding table carriage system - Maximum saw blade diameter: * Up to 450 mm with scorer blade installed * Up to 550 mm without scorer blade - eye-S 15" electronic control, complete with: * 15" touchscreen monitor * Direct control over the following axes with manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Parallel fence positioning - Scorer height and lateral adjustment (the scorer is automatically raised to set position upon activation and lowered upon deactivation) * Operator assistance features for executing complex cuts * Storage of up to 1000 programs with associated images * Storage of up to 1000 different tools with associated images * Cut sequence management from preloaded parametric processing programs * Environment for creating and saving new sequenced work programs * Automatic acquisition of working dimensions from the Thundercut app * USB port * Network connection ready - Auxiliary functions of electronic control, including: * Automatic calculation of correct stop position on the longitudinal fence for angled panel processing with tilted saw blade Ffsdoxavrgepfx Afljt * Automatic calculation of correct stop position for miter cuts on the worktable miter fence with or without tilted saw blade - Pivoting control panel above the table

Stanje: rabljeno, Leto izdelave: 2009, Technical details: Basket dimensions: 1160 x 600 x 500 mm Heating power: 4 kW Rated power: 16 kW Ffjdpfx Afju Nu Iyelst Rated current: 400V / 50/60 Hz Heating power: 4 kW Temperature range: 0 - 60 °C Machine weight approx.: 0.308 t Dimensions (L x W x H): 1.5 x 1.0 x 0.95 m Application: Suitable for use in workshops, manufacturing, and service operations The ultrasonic cleaning unit (bath) is equipped with an external generator for two modules. Type: MW 2000 GT with a 25 kHz frequency range Sonic output: 2 x 2000 watts, adjustable in 9 steps Continuous mode/pulse mode or ultrasonic time/cleaning time adjustable (Possible output up to 11 kW) The housing, basket insert, and lid are made of stainless steel. Internal dimensions: L: 1160 x W: 600 x D: 500 mm (up to the outlet: 410 mm) Protection rating: IP23 The washer is mounted on a drip tray.