Format Žaga

ALTENDORF ALTENDORF F45

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti V postopku preverjanja Dolžina vozička z dvojnimi valji: 3000 mm Motor: 5,5 kW Ndjdpfeuciqaox Adyod 4 hitrosti vrtenja: 3000, 4000, 5000 in 6000 vrt/min Predrezalna enota: 0,75 kW Vzporedno vodilo z natančno nastavitvijo: 1200 mm Nagibno žagin listje ⌀ 350 mm (maks. 450 mm) Samodejno centralizirano mazanje za nagib žaginega lista Višina reza: 100 mm (maks. 150 mm z žaginim listom 450 mm) Višina reza pri 45°: 70 mm (maks. 106 mm z žaginim listom 450 mm) Električni podatki in motorji Napetost: 400 V Priklop: trifazni Moč: 7 kW Motor: 7,5 KM Dimenzije stroja

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 733 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving both efficiency and ergonomics. The height adjustment is provided as standard via manual hydraulics, within a range of 650 – 1050 mm (greater or lower adjustments available upon request). Like the SST fixed series, the worktop also features a 100 x 100 mm grid pattern with Ø 28 mm holes. When used in combination with machining equipment, inspection or rework fixtures (deburring, marking, inspection) can be adjusted to match the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced on site immediately after removal from the machine and then transferred to maintenance for repairs. The fully bolted construction of the clamping plate allows the working surface to be replaced cost-effectively if it becomes worn. Ndedpfefk Aifsx Adyjd Price must be requested from the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Njdpfsfgyh Uox Adyodd Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.300 mm, glavni premer žaginega lista: 450 mm, moč: 5,5 kW (7,48 KM), Oprema: dozator, motorna zavora, Stroj na voljo od oktobra 2025 - Odlično stanje - Digitalni prikaz za nastavitev višine, motorizirano nastavljiv - Digitalni prikaz za nastavitev nagiba, motorizirano nastavljiv 90° - 45° - Dolžina formatnega vozička 3200 mm Nedpfow Rc H Hox Adyodd - Predrezilo, 2-osno motorizirano nastavljivo - Digitalni prikaz širine reza na paralelnem vodilu 1300 mm, motorizirano nastavljiv - Moč motorja 5,5 kW (7,5 KM) Vario - Digitalni prikaz za brezstopenjsko nastavitev vrtljajev 2800 - 6000 min⁻¹ - Digitalni prikaz za kotni prislon, rezanje do 3800 mm - Podaljšek mize 800 mm

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 630 kg Ndsdpfofk Ailjx Adyjd Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for the efficient production of assembly, welding, and adhesive constructions, such as fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalog section: welding table accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small to medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick working surface equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The table perforation allows the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be optionally fitted with stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, in deviation from the standard. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of wear. This design makes the table system especially durable and sustainable in use. Price must be reconfirmed with manufacturer before ordering!!

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Nodpjfgyicjfx Adyodd Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Njdpfxsfd Abaj Adyedd Illustration shows semi-automatic version.

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Ndjdeh S Nxpjpfx Adyed Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Stanje: rabljeno, Saw blade tiltable 0-45° Carriage length 3,200 / 3,800 mm Cutting width 1,300 / 1,500 mm Motor power 7.5 kW Cutting height 177 mm Cutting height at 45°: 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 rpm Working height 870 mm Extraction port diameter 1x120, 1x100 mm Fimal Panel Saw P 3200-08 AX Partnership Edition ----- Manufacturer's description: - Sliding carriage made from anodized aluminum including high-precision guide rails made of hardened and ground steel - Carriage can be locked in any position - Saw blade guard with swiveling device - Outrigger table with adjustable miter fence, including length compensation at every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt change for speed adjustment from above (opening in saw table) - Control lights for set saw blade speed - Electrical system and safety devices conforming to CE standards Technical data: - Saw blade tilt: 0° to 45° - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at parallel fence: 1,300 mm - Max. cutting height with 500 mm blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 – 86.3 dB(A) Njdpfetg Ailox Adyedd - Extraction ports: 1 x 120 mm, 1 x 100 mm - Miter fence extendable to 3,400 mm ----- Equipment Partnership Edition P 3200-08 AX: - 3-axis programming unit for saw blade height adjustment, blade tilt adjustment, and parallel fence adjustment via TFT 15" touchscreen (Windows-based), including 2,500 program memory slots, 2 USB ports, and 1 Ethernet network connector - Scoring unit with electromechanical height adjustment and motorized axial pulse adjustment, including digital displays for height and width - Miter fence with 3 stops; 2 stops with digital display, 1 stop analog but also digitally adjustable via coupling - Upper control panel including automatic star-delta start Optional at extra charge (on request): - Cutting width 1,500 mm, sliding carriage length 3,800 mm ----- Price of the above-mentioned machine on request! ----- Prices excl. packaging and shipping Prices excl. statutory VAT ----- (Technical data as per manufacturer – no guarantee!)

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices Nsdpjfg E Hlefx Adyodd • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice