Drsna namizna žaga

HOLZ-HER Super Slide 1245

Stanje: novo, Leto izdelave: 2025, Performance: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Ncodpfopfatpsx Aacjn Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Ncjdpeh Ayyqefx Aacen Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, številka stroja/vozila: 1277/8-71, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 7A Njdpfx Aeh U Sqrjacecn Cutting length 4300 mm Cutting height 1925 mm Frame height 2210 mm Machine height 2500 mm Room height 2540 mm Edging height 1870 mm Pass-through height 1940 mm

Leto izdelave: 1977, Stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivelling heads. Drilling heads included on both sides at the front. Very good condition. Njdpfx Ajd N Rb Deacscn Available immediately.

Stanje: rabljeno, Leto izdelave: 2010, številka stroja/vozila: AB/203002, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.200 mm, FORMATNA KROŽNA ŽAGA SCM MOD. SI 450 EP CLASS - Voziček 3200 mm - Vodilo za poševne reze na vozičku - Motor 7,5 kW (10 KM) - Inverter za spreminjanje hitrosti - Motorizirana nastavitev predreznega lista Nedpfsx Runqex Aacecn - Serijska št. AB/203002 - CE (leto 2010) - Vključuje navodila in CE izjavo

Stanje: rabljeno, Four-sided planer REX, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles with 2 rotation speeds, electric table lifting device Ncodperxf Smjfx Aacon

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Žagin list nagiben +/- 45° Dolžina sani 2800 mm Širina reza 1440 mm Moč motorja 7,5 kW Višina reza 150 mm Premer žaginega lista 450 mm Teža stroja pribl. 1200 kg Nodpfoxcg Hgsx Aacjcn Dimenzije D-Š-V 3,2 x 3,4 x 1,7 m Ta formatna krožna žaga je v zelo dobrem stanju, takoj na voljo in jo je možno pod napetostjo preizkusiti pri prodajalcu. OPIS: - Pripravljena za predrezalno enoto - Formatna krožna žaga z nagibnim žaginim listom in predrezalno enoto za natančne reze v lesene materiale, pohištvo, pohištvo po meri, okenske okvirje, vrata, plošče, plastiko, kompozitne materiale, aluminij in drugo – CE standard.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, širina obdelovanca (maks.): 40 mm, skupna višina: 950 mm, največja dolžina izdelka: 3.672 mm, This BRANDT edgebander Ambition 1110 KDF 110 was manufactured in 2016. It is a single-sided edgebanding machine designed for processing straight panel edges. With an overall length of 3,672 mm and a feed speed of 8 m/min, it is suitable for workpiece thicknesses from 8 to 40 mm. Please check the availability of this BRANDT edgebanding machine Ambition 1110 KDF 110. Contact us for further details. • Machine type: Single-sided edgebanding machine for straight workpiece edges • Feed speed: 8 m/min • Working height: 950 mm • Workpiece and edge parameters • Workpiece thickness: 8-40 mm • Workpiece width: min 70 mm (thickness 8-22 mm) or 120 mm (thickness 23-40 mm) • Edge material (coil): 0.4-3 mm • Edge material (strips): 0.4-3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) • Jointing unit: 2 x 0.75 kW, 200 Hz motors (one infeed, one outfeed), equipped with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge overhang trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable between flush, radius, and chamfer trimming • Profile scraper: For rounding or chamfering pre-milled PVC edges (max. 3 mm) • Glue joint scraper: Removes glue residue in the glue joint area • Control and electrics • Controller: EASY CONTROL EC 10+ with 7" wide-format touchscreen • Program storage: Up to 20 processing programs • Supply voltage: 400 V / 3 Ph / 50 Hz • Full load current: 15.0 A • Pneumatics: Min. 6 bar Nsdjyir S Nopfx Aacocn • Operation and maintenance • Adjustments: Manual setting of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for the transport chain (standard) • Safety: CE-compliant; dust tested (TRK max. 2 mg/m³) Technical Specification Feed Speed 8 m/min

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Ncjdpfx Aajwtgcxocsn Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage Nedpfx Aajw I Uxcjcecn The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.