Mobilna enota za ekstrakcijo

AL-KO APU 300 P

Stanje: novo, Leto izdelave: 2025, Compact design Maximum reliability High suction capacity Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Longer filter service life Easy emptying Plug-and-play delivery with rotary valve lock Models with rotary valve lock: AL-KO POWER UNIT® 300 ZRS Suction connection: 300 mm Motor rated power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum air flow: 4,900 m³/h 6,000 m³/h Rated air flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: from stock 54634 Bitburg - immediately available - Subject to prior sale Gbodpfx Ashkzu Aohmen

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Gbodpfx Ajvvkd Tohmon

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Suction inlet: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 6,000 m³/h Rated airflow: 5,089 m³/h Negative pressure: 2,587 Pa Filter surface area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting output: 30 - 50 kg/h Briquette diameter: 50 mm Weight: 1,570 kg This machine is brand new in our stock – IMMEDIATELY AVAILABLE – Subject to prior sale Location: 54634 Bitburg Gsdpfx Ahsh D If Hsmobn

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolna linija za briketiranje 2 x RUF 330. Kotlovnica, bobnasti sušilnik, transporterji. Gsdjxazhtepfx Ahmobn

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.400 h, moč: 11,5 kW (15,64 KM), višina obdelovanca (maks.): 50 mm, največja debelina roba: 8 mm, skupna dolžina: 5.860 mm, Single-sided edge banding machine, right-hand version For hot-melt adhesive application. Quick-change gluing unit for hot-melt adhesives. Processing of PU adhesive granules possible in compliance with adhesive processing regulations. Leak-proof glue reservoir located underneath the glue roller. Precisely adjustable adhesive application onto the workpiece via glue roller—no adjustment required for different workpiece thicknesses. Selectable glue roller rotation: with or against feed direction. Glue temperature control via electronic thermostat. Automatic glue temperature reduction during work interruptions. Infrared activation of hot-melt adhesive. Automatic edge magazine for roll material and fixed lengths, incl. roll plate, Ø 800 mm. Fitted with reinforced pre-cutting shear for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at the machine infeed. Gbodpfx Ajyud S Eshmjn Electronic control system: power control PC 20+ BRANDT control system with color graphic user interface for easy and convenient operation and programming. Technical details: – Swiveling control panel at the machine infeed – Durable short-stroke membrane keyboard – Color graphic flat-screen display – Industrial PC with Compact-Flash disk as mass storage – Unit function keys with LED status indicator – Operator guidance with color pictograms – Online language switching between various foreign languages – Display of key actual and target machine states – Status messages in plain text – Simple selection and correction of setpoints – Easy axis adjustment (with corresponding unit version) – Online help in plain text via an accessible help window anytime – Production data acquisition for production time, edge length and number of workpieces, as daily and total values – Inspection and maintenance interval display – Remote service capability via integrated modem and installed service software – Storage of machining programs – Production according to machining programs – Data backup of machining programs

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer. Godpfxjv Erkaj Ahmobn

Stanje: rabljeno, Rabljeni stroj Oprema in tehnični podatki: - Površina stiskanja: 2.200 × 1.100 mm - Število cilindrov: 4 - Največji pritisk stiskanja: 60 ton - Izvedba: 1 etaža - Grelne plošče: zlato eloksirane energijsko varčne plošče ELKOM - Odprtina: 350 mm Gedpfjwpm I Hox Ahmsbn - Priključna moč: 14 kW - Premer bata: 80 mm - Delovni tlak: 365 atü Mere: 2.600 mm × 1.250 mm × 1.750 mm Dobavljivost: takoj Lokacija: Röllbach

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TET502P3 - 2200403312, hladilna zmogljivost: 105 kW (142,76 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: zrak, skupna masa: 1.748 kg, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): −5 °C, vhodna napetost: 400 V, pritisk: 6 letvica, temperatura: 7 °C, volumenski pretok: 17,9 m³/h, tlak črpalke: 3,42 letvica, skupna širina: 1.255 mm, skupna dolžina: 3.298 mm, skupna višina: 2.119 mm, trajanje garancije: 3 meseci, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Process chiller / air-cooled water chiller Model: TAEevo Tech 502 + P3 Manufacturer: MTA S.p.A. The TAEevo Tech 502P3 is a compact, air-cooled water chiller, suitable for outdoor installation (ambient temperature range: -20°C to +46°C). The chilled water temperature can be set from -10°C to +30°C. Includes crankcase heater, phase monitoring, 500-liter buffer tank, and built-in P3 circulation pump. Adjustable outlet chilled water temperatures: -10°C to +30°C. Cooling capacity: 105 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 17.9 Available pump pressure (bar): 3.42 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 55.09 Max. current (A): 93.06 Starting current (A): 191.65 Protection class: IP54 Dimensions: Length (mm): 3298, Width (mm): 1255, Height (mm): 2119 Weight (kg): 1748 Connection: Rp 2 1/2" Gbsdpfx Ajt Hr N Ijhmjn Serial No.: 2200403312 Year of manufacture: 2023 Condition: Visual - excellent, Technical - fully functional Stock machine, as new Price: on request in euros (plus VAT, ex works Nettetal) – 12 months warranty (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Leto izdelave: 2023, stanje: novo, Always in stock, available in left- and right-hand versions with automatic motorized cleaning. Riedex DM-200 Motor power: 4.0 kW Plug-and-play. Godpfxjku Aibo Ahmjbn Packed on a pallet! Ready for shipping. Alternatively available with JET cleaning system. Many different configurations possible: - with rotary valve (can be supplied with base frame if required) - with briquetting press and more...

Stanje: dober (rabljeno), Koda: 0136 Znamka: ITALPRESSE Model: FORMATIC 20.9 Hidravlična membranska stiskalnica Obojestransko lepljenje furnirja na panele, ki so na eni strani oblikovani ali profilirani, na drugi pa ravni – za lepljenje vhodov na omarice, čelne stranice predalov, pisalniške in konferenčne plošče, kuhinjske delovne plošče ipd. 3D lepljenje plastičnih folij (PVC, PPE, ABS, transfer folije) na panele, ki so oblikovani ali profilirani na eni strani – za izdelavo vrat omaric, čelnih stranic predalov, pisalniških in jedilnih površin, kuhinjskih pultov, prodajnih pohištvenih elementov, notranjih vrat itd. Dimenzije plošče: 2000 x 900 mm Razmak (daylight): 325 mm Hod cilindra: 325 mm Grelec – električni kotel: 27 kW Tlačna sila: 300 ton Število tlačnih cilindrov: 3 Moč hidravlične enote: 5,5 kW Manometer za kontrolo tlaka Avtomatska ponastavitev tlaka Časovnik odpiranja Gbjdpopbvqvefx Ahmjn Skupne dimenzije (DxŠxV): 3300 x 1400 x 2400 mm Teža: 8100 kg