Lupilec sadja za kivi, mango, jabolka itd.

ABL OP30K

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et50-neu-löwa, 50m³ underground tank cistern, brand new according to DIN-EN 12285-1, Single-walled, raw interior, externally professionally insulated. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank is equipped with a DN 600 manhole including dome cover, bolts, and gasket. Upon request, the tank can be fully equipped with a fire-fighting water suction connection, bringing the tank in line with DIN 14230 requirements for underground fire-fighting water tanks. Fire-fighting water suction connection / suction pipe in stainless steel V2A – as per DIN 14230 – comprising: - 1 pc. DN125 suction pipe made of stainless steel V2A, with Storz A fixed coupling and Storz A blank coupling, - 1 pc. DN100 vent pipe with hood in stainless steel V2A, Lsdpfx Afjd Tmaqershp - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Fire Water Extraction Point", - 1 pc. dip tube with gauge rod for measuring fill level, - 1 pc. dome cover with bolts and gasket. The suction pipe can be used both as a fill and extraction pipe. All components are pre-assembled for installation – ex works – If required/desired: Installation of an above-ground fire water suction connection in accordance with DIN 14244 – Form B, Including A fixed coupling to DIN 14319 and A cover cap to DIN 14319. Housing made of cast iron – exterior coated with epoxy resin. Optional: Complete interior sandblasting and application of a potable/fire water coating. Tank ex works, loaded and ready for transport. General: You will receive an invoice with shown VAT. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! Furthermore, we purchase existing tank systems and are able to properly empty, clean, dismantle, and transport them with certified specialist company qualification in accordance with the German Water Resources Act (§ 62 WHG).

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, 2 vacuum drying ovens, GMP-compliant, by Vötsch Industrietechnik (also available for individual sale). Product-contact material is stainless steel 1.4435. Heating type: externally heated hollow plates; the ceiling is also heated, double-walled with internal serpentine flow guides, pressure-tight up to 3 bar. Heating is provided via a heating/cooling circuit (indirect heating with hot water) using a separate hot water thermostat. Operating temperature: max. 95°C, internal vessel operating pressure: 0 to 1 bar abs. External dimensions: 1,485 mm width (housing), 2,000 mm height (housing), 1,700 mm depth. Trays: 1,200 mm width x 950 mm depth. Number of trays: 13 units. Usable area: 14.8 m². Weight: approx. 2,900 kg per dryer. Lhodpfxoucdqno Afrjp Connections: hot water connection (supply and return), vacuum connection. Heating of the vacuum drying ovens via heating medium, e.g. water, with connections at the rear. Heating medium heated by a temperature control unit Type 95-36-E, rated voltage 400 V 3/N PE AC, 50 Hz, device heating capacity 36 kW, heating capacity can be reduced to 18 kW within a specified temperature range.

Stanje: rabljeno, Proizvajalec: Multivac Tip: Vakuumski stroj Model: C 400 Globina komore: 470 mm Višina komore: 170 mm ali 250 mm Možne konfiguracije varilnih letev: – spredaj 650 mm + desno 450 mm – levo 520 mm + desno 520 mm – levo 520 mm + desno 520 mm + spredaj 520 mm – spredaj 700 mm Napetost: 3 x 400 V, 50 Hz Vgrajena vakuumska črpalka: 100 ali 140 m³/h Glavni material: nerjavno jeklo Teža stroja: 250 kg Ledpfxst Up Rre Afrohp

Leto izdelave: 2018, Stanje: zelo dobro (rabljeno), AGREGAT za hladilnik z uparjalniki in kondenzatorji – trenutno nameščen v hali površine 5.000 m², s temperaturnim režimom hlajenja od 4 do 8 °C, namenjen za shranjevanje sadja in zelenjave. Za celotne tehnične specifikacije nas prosimo kontaktirajte. Ljdpsttq E Eefx Afrohp Hvala!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Glazen potten afvul- en sluitlijn. Uitgerust met 12 vulkoppen en 4 sluitkoppen. Ljdpfxetqmvro Afrehp

Leto izdelave: 2023, obratovalne ure: 0 h, Stanje: novo, številka stroja/vozila: 1234, The wastewater is filtered by a dual filter system. Two filters can be operated independently of each other. Technical specifications: - Capacity: max. 2,000 l/h - Filtration fineness: 500 µm - Material: WNr. 1.4301, stainless steel AISI 304 Lhjdsiu Hyajpfx Afrep - Dimensions: 550 x 300 x 1200 mm - Weight: 20 kg - Connection: DN 25 Optional: - Filter 1: 250 μm - Filter 2: 100 μm - Filter 3: 50 μm

Stanje: novo, Leto izdelave: 2020, Električni stroj za izdelavo kolen je naprava za oblikovanje kolen iz okroglih in pravokotnih cevi različnih premerov. Stroj za izdelavo kolen EEM-200plus predstavlja izboljšano različico stroja EEM-200. Dodatno ima četrto spodnjo stiskalno orodje, kar omogoča stiskanje cevi z vseh štirih strani med upogibanjem in zagotavlja boljšo kakovost kolena. Naš stroj lahko uporabljate tako za delo z okroglimi kot pravokotnimi cevmi. Stroj za izdelavo kolen EEM-200plus omogoča obdelavo cevi s premerom od 80 do 200 mm. Pozor: Notranji premer cevi, ki jo uporabljate za upogibanje, mora biti 1 mm večji od premera matrice stroja za upogibanje! Zaklep cevi mora biti zaprt ali zavaran, da se med upogibanjem ne odpre! Stroj za izdelavo kolen EEM-200 je električen in za delovanje ne potrebuje zračne ali oljne napeljave. Poraba električne energije znaša 1,5 kW/h. Potrebna napetost je 380 V. Uporaba stroja je možna v okoljih s temperaturo od -5 do +45 stopinj Celzija. Stroj za izdelavo kolen je primeren za upogibanje cevi z največjo debelino do 0,8 mm. Stroj EEM-200plus omogoča upogibanje kolen s pomočjo posebnih stiskalnih orodij. Za vsak premer cevi je potreben en komplet stiskalnega orodja. Če želite upogibati cevi različnih premerov, morate dokupiti dodatna stiskalna orodja. Lsdpfx Aef Epznofrjhp Ob nakupu stroja prejmete štiri komplete stiskalnih orodij, tako da lahko upogibate do štiri premera cevi v razponu od 80 do 200 mm (izbira premerov po vaši želji).

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, New machine 24 months warranty Advantages: Lsdpfx Afjfthxhsrshp + Excellent price-performance ratio + Robust, compact table-top dough sheeter + Operation via push buttons + Suitable for all types of dough for sheeting and laminating + PVC conveyor belts, quick and easy to clean + Therefore, also suitable for marzipan and rolled fondant + Tables can be folded up on both sides + Scrapers can be removed effortlessly without tools + Machine comes standard with 1 hand crank + Can be placed on any table at least 80 cm deep + Fast spare parts supply within 1-2 working days Technical Data: - Belt width: 520 mm - Table length: 670 mm each = 1,340 mm total - Roller adjustment: from 1 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 0.37 kW - Electrical connection options (choose the one suitable for you): --- 230 V - 1Ph - 50Hz --- 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: --- Operating position: 1460 x 940 x 550 mm (WxDxH) --- Parked position: 800 x 940 x 665 mm (WxDxH) - Net weight: 100 kg

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Lhsdpfx Ajfgyh Uofrep Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Manufacturer: BOSCH Type: SVZ 2500 A Maximum bag length: 400 mm Minimum bag length: 100 mm Maximum bag width: 250 mm Lhedpfx Ajrrv T Isfrep Minimum bag width: 90 mm Maximum output: 80 bags/min