Stroji za merjenje zobnikov nakup rabljenega (29)

Stanje: dober (rabljeno), Frame micrometer, micrometer screw, measurement of tooth width, disc-shaped measuring surfaces -Measuring range: 275-300 mm -One drum revolution equals: 0.5 mm -with locking device -Measuring force: ratchet -Setting standards -Hand protection -Key included -Quantity: other sizes also available -Weight: 1.5 kg Lodpsb A R H Djfx Abbehb

Stanje: dober (rabljeno), Frame micrometers, micrometer screw, measurement of tooth width, disc-shaped measuring faces - Measuring range: 50–75 mm Ljdpfxeb A R Hyo Abbohb - One revolution of the thimble corresponds to: 0.5 mm - Without locking device - Large measuring faces - Measuring force: ratchet - Supplied with: case - Calibration standards - Hand guard - Quantity: other sizes available - Weight: 0.7 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely Lsdpow N S E Asfx Abbshb adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data Lhodpfxsul Efme Abbeb

Stanje: rabljeno, Leto izdelave: 1991, Premer kolesa - maks. --- mm Širina kolesa --- mm Modul - maks. --- Lhsdpfx Ajya Eqasbbjb Modul - min. --- Krmilnik --- Skupna zahtevana moč --- kW Teža stroja ca. --- t Potreben prostor ca. --- m

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.800 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 650 mm, teža obdelovanca (maks.): 180 kg, We are selling a fully overhauled Wenzel WGT350 XL gear and rack measuring machine. The machine is suitable for measuring gears and racks. • Max. rotary table workpiece diameter: 5 to 400 mm • Max. rotary table load: 180 kg • Travel ranges: X = 1800 mm, Y = 200 mm, Z = 650 mm • Counter support measuring range: 20 to 900 mm • Module measuring range from 0.5 mm • Max. rack length: 1200 mm • 6x probe changer including 6x SP600M disks • Machine temperature compensation Lhedpfevitkisx Abbsb • Active air suspension of the machine • Year of manufacture: 2006 • Accessories such as drive dogs, reference sphere, etc. as pictured • 200 mm chuck with internal and external jaws The following software modules are included: • TMain – Program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Computational axis determination • TGear – Spur gear measurement program • TShaft – Program for dimension, form, position, and scanning of unknown contours • TWorm – Worm gear measurement program • TRack – Rack measurement software • TReverse – The parameters of an unknown gear, module (mn), helix angle (ß), and pressure angle (α), can be determined with TReverse. • Statistics program: statistical analysis for spur gear, bevel gear, and worm gear testing For more information, please contact us by email.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.700 mm, skupna dolžina: 1.765 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, priključek za stisnjen zrak: 4 letvica, Wenzel Smart Gear - Gear and 3D Coordinate Measuring Machine Lsdpfx Absvvudkobohb The machine is in very good condition and fully functional. It has been regularly maintained and well cared for. Machine Data: • Machine dimensions: L=1765mm, W=1700mm, H=2232mm • Max. rotary table workpiece diameter: 5 to 270mm • Gear measurement accuracy according to VDI/VDE2612/2613 Group II • Max. rotary table load: 20 daN • Travel ranges: X=500mm, Y=450mm, Z=400mm • Scanning probe head: Renishaw SP600M • 7x SP600 probe change trays included • Module measuring range: 0.4 – 10mm • Active air damping of the machine • Year of manufacture: 2008 • Accessories such as drivers, reference sphere, etc. as pictured • 3-jaw chuck, D=80mm with internal and external jaws • 24-inch monitor, mouse, keyboard The following software modules are included: Gear software: • TMain – Program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Analytical determination of axis positions • TGear – Spur gear measurement program • TGear – Addendum and dedendum circle option • TWorm – Worm gear measuring program 3D Software: • Metrosoft CM 3.8

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 2 preskusovalni napravi za preizkus valjanja z dvema bokoma / 2 napravi Ljdpfx Abshaqumjbjhb Merilna naprava za zobnike za testiranje ozobljenja (primerna za enostavno in hitro kontrolo ozobljenja) Naprava za valjanje z dvema bokoma za merjenje zobnika, rabljena posebna preskusna naprava za končno kontrolo. 2 preskusovalni napravi z dvema bokoma za končno kontrolo, za hitro in enostavno odkrivanje udarcev ali poškodovanih mest (trkanje) na preizkušanem obdelovancu. Elektromotorni pogon, delno z vpenjalno napravo Preizkus z dvema bokoma Cena / podrobnosti na zahtevo Za vse tehnične podatke si pridružujemo pravico do napak. Prodaja izključno v države Evropske unije.

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Premer kolesa - maks.: 5 - 350 mm Modul - maks.: 20 Teža stroja pribl.: 0,8 t Lhsdpfex Uzvvox Abbjb Modul - min.: 0,5 Razdalja med konicama: 5 - 750 mm Premer mize: 260 mm z-os: 600 mm y-os: 185 mm Maks. kot nagiba: 45°

Stanje: dober (rabljeno), Merilni ojačevalnik, napajalni modul, merilni ojačevalnik točkovne izvedbe -Proizvajalec: Keyence, merilni ojačevalnik točkovne izvedbe -Tip: SJ-M300 Lsdpfxjx S Evzs Abbjhb -Dimenzije: 130/50/V75 mm -Teža: 0,2 kg

Stanje: rabljeno, Frame micrometers, micrometer screw Lsdpfx Absdz Smcobjhb - Measuring range: 400 - 500 mm - Other sizes: available - Weight: 8.7 kg

Stanje: rabljeno, Pressure gauge, flow meter, measurement and control technology, measuring device Lhsdsfkpifopfx Abbob – imc: Universal measuring device µ-MUSYCS – Voltage: 110 – 230 V AC/DC – Dimensions: 330/345/H145 mm – Weight: 6.4 kg

Stanje: rabljeno, Frame micrometers, micrometer screw - Measuring range: 125 - 150 mm - Delivery: as is, condition as inspected Lhjdpfsfn Am Rjx Abbob - Accessories: missing, see photo - Other sizes: available - Box dimensions: 330 x 180 x H30 mm - Weight: 1.1 kg

Stanje: rabljeno, Micrometer screw gauges, micrometer screw - Measuring range: 75 - 100 mm - Delivery: as-inspected condition - Accessories: missing, see photo Lhodpsfn Am Tofx Abbob - Other sizes: available - Box dimensions: 265/145/H30 mm - Total weight: 0.7 kg

Stanje: rabljeno, Frame micrometer, micrometer screw Lodpsdz Smfofx Abbehb - Measuring range: 200 - 225 mm - Without test piece - Other sizes available - Weight: 1.4 kg

Stanje: rabljeno, Flow meter, vibration measurement, vibration measurement display unit, monitor display Ljdpfx Absf Tdtrobjhb - Manufacturer: Lorenz, measuring amplifier - Model: GM40 - Price: per unit - Quantity: 5 units - Dimensions: 75/20/H110 mm - Weight: 0.1 kg/unit

Stanje: rabljeno, Micrometer Calipers, Micrometer Screw - Measuring range: 75 - 100 mm Lsdefn Am Uspfx Abbjhb - Accessories: see photo - Other sizes: available - Box dimensions: 265/125/H25 mm - Total weight: 0.8 kg

Stanje: rabljeno, Gauge block case, gauge blocks, parallel gauge blocks, pin gauge set, pin gauges, plug gauge -Manufacturer: Cary, plug gauge pin set: 3.01 - 3.49 mm Ljdog T I Nhjpfx Abbshb -Contents/Nominal sizes: see photos -Box dimensions: 135/85/H60 mm -Weight: 0.3 kg

Stanje: rabljeno, Inside micrometers, micrometer screw, internal diameter gauge, internal precision measuring device, cylinder gauge, - Delivery: as is, in condition as inspected - Condition: incomplete, see photos Lhjdpfxjl Ha R He Abbsb - Measuring range: up to 150 mm - Dimensions: 280/450/H60 mm - Weight: 2 kg

Stanje: dober (rabljeno), Measuring amplifier, for flow meter, vibration measurement, display unit, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Quantity: 2 measuring amplifiers available Lhjdpsf H Hyiefx Abbjb -Price: per unit -Dimensions: 160/60/H145 mm -Weight: 0.9 kg

Stanje: dober (rabljeno), Pressure gauge, flow meter, measurement and control technology -Manufacturer: Fischer Mess- und Regeltechnik -Type: DE45N50041PK03MW -Quantity: 4 units available -Price: per piece -Dimensions: 90/100/H70 mm -Weight: 0.3 kg Lhjdpfsdz Aq Tex Abbsb

Stanje: dober (rabljeno), Frame micrometers, micrometer screw, measurement of tooth thickness, disc-shaped measuring faces - Measuring range: 25-200 mm - One revolution of the drum corresponds to: 0.5 mm Ledpfxeb A Sx Ue Abbehb - With locking device - Large measuring faces - Measuring force: ratchet - Supplied with case - Calibration standard - Hand guard - Spanner - Other sizes available - Weight: 5 kg

Stanje: dober (rabljeno), Merilni ojačevalnik, napajalni modul, merilni ojačevalnik v točkovni izvedbi -Proizvajalec: Keyence, merilni ojačevalnik v točkovni izvedbi -Tip: SJ-M300 -Izlivalna palica: tip SJ-M030G -Količina: 2x merilni ojačevalnik na voljo -Cena: na kos Lhodpfxoxv Sf Uj Abbjb -Transportne dimenzije: 250/180/V80 mm -Teža: 0,9 kg/kos.

Stanje: rabljeno, Inside micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, Ljdsl Ha R Repfx Abbshb -Measuring range: 35-60 mm -Dimensions: 115/450/H60 mm -Weight: 1.6 kg

Stanje: dober (rabljeno), Leto izdelave: 2016, Merilnik pretoka, merjenje vibracij, tlačni senzor -Nova V: pretvornik volumnskega pretoka -Po konstrukciji podoben Premasgard: 1161 S+S Regeltechnik -Napetost: 24 V AC/DC -Količina: 1 kos -Mere: 70/70/V130 mm Lsdew S Tq Ejpfx Abbjhb -Teža: 0,3 kg