Avtomatske izsekovalne stiskalnice nakup rabljenega (179)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150 583, skupna višina: 3.975 mm, nastavitev hidravličnega cilindra: 125 mm, vgradna višina: 410 mm, višina mize: 1.220 mm, skupna širina: 2.725 mm, skupna dolžina: 3.510 mm, dolžina mize: 1.500 mm, širina mize: 1.200 mm, stiskalna sila: 200 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 340 mm, širina krmilne omare: 600 mm, vrsta vhodnega toka: trifazni, razmak između stupova: 900 mm, razdalja med stranskimi nosilci: 900 mm, razdalja med stojali: 1.520 mm, skupna masa: 3.700 kg, leto zadnje generalne obnove: 2025, ATTENTION: The machine sustained transport damage and will undergo a complete mechanical and electrical overhaul before delivery in 2025/2026. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Slide adjustment: 125 mm Strokes per minute: 30 - 180 Die installation height: 410 mm Table dimensions: 1500 x 1200 mm Isdpfew H Arvox Ah Detn (The press will be delivered with a new table plate, T-slot design can be freely selected) Slide dimensions: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, year of manufacture: 2020

Stanje: rabljeno, Leto izdelave: 1988, Krmilna napetost 220 V Frekvenca 50 Hz Kombiniran stroj: da Itsdpfxendz Npj Ah Den Veliko dodatne opreme, približno 50 setov Tlak: 50 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 1203697, Used stamping press Manufacturer: Haulick & Roos Model: RVD 8/800 NS Press with adjacent control panel: Haulick & Roos RVD 80-800NS Eccentric press with double connecting rods and 4-point mounted eccentric shaft No.: 1203697 Year of manufacture: 1990 Pressing force: 800 kN Speed: 30–300 strokes/min Drive: 26 kW Ram stroke: 4–60 mm Ram adjustment: 80 mm Table: 800 x 640 mm Pass-through hole: 780 x 60–160 mm Table height above floor: 1240 mm Upright width: 780 mm Lateral upright distance: 350 mm Shut height (max. stroke bottom/ram top): 300 mm Space requirement press (LxWxH): 3200 x 1700 x 3000 mm Control cabinet (LxWxH): 1800 x 400 x 1900 mm Weight: 12,000 kg Decoiler: Ijdoudn Utspfx Ah Dstn Eigl 2527-90 Motorized: No Straightening unit with loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300 mm Max. thickness: 3 mm Number of rollers: 5 Feeder: Haulick & Roos RS 260/120°/2727 Max. feed length: 260 mm Max. width: 260 mm Max. thickness: 3 mm Feed speed: 40 m/min Material cross-section up to 800 mm?

Stanje: dober (rabljeno), BSTA 18 Iedpfs Udtysx Ah Dotn Feed unit: BBV High-speed: 600 spm Max. pressing force: 180 kN Max. strip width: 120 mm Feed: Bruderer BBV190 Completely overhauled, siliconized Good condition More high speed presses in stock from Bruderer (models BSTA 18, 20, 30, 200, 50) as well as Schaal and Mabu presses.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Large batch of used BRUDERER stamping presses BSTA 25 / BSTA 25H as well as various spare parts, control cabinets, BBVs, etc. Itedpfx Ahov I Unas Don

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 160 tons Side frame passage: 600 mm Itedjcna Hfopfx Ah Djn Installation height: 420 mm stroke top, adjustment bottom Ram adjustment: 80 mm Table surface: 1100 x 1100 mm Ram surface: 1030 x 800 mm Pass-through hole in table: 680 x 250 mm Adjustable stroke: 30–100 mm Strokes per minute: 40–180 Power requirement: 18.5 kW Weight: 20 tons Height: 3950 mm Siemens press control and ALBA roller feed, year 1989, 400 x 3 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150 152, skupna višina: 6.615 mm, nastavitev hidravličnega cilindra: 200 mm, vgradna višina: 800 mm, višina mize: 1.000 mm, skupna širina: 3.210 mm, skupna dolžina: 5.140 mm, dolžina mize: 3.000 mm, širina mize: 1.400 mm, stiskalna sila: 400 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 3.600 mm, širina krmilne omare: 600 mm, vrsta vhodnega toka: trifazni, razmak između stupova: 1.100 mm, razdalja med stranskimi nosilci: 1.100 mm, razdalja med stojali: 3.020 mm, skupna masa: 100.000 kg, leto zadnje generalne obnove: 2025, ATTENTION: Machine will be completely mechanically and electrically overhauled before delivery in 2025/2026. Pressing force: 4000 kN Adjustable stroke: 50 - 300 mm Ram adjustment: 200 mm Strokes per minute: 15 - 60 Die installation height: 800 mm Table dimensions: 3000 x 1400 mm Itedpfx Ahsw H Ag To Djn Ram dimensions: 3000 x 1200 mm New control system: SIEMENS S7 1500 series

Stanje: rabljeno, Leto izdelave: 1999, Priključna napetost 220 V Nazivni tok 263/152 Št. stroja: Teža stroja cca 1 t Itodpfx Ahsvvx E Se Don

Stanje: dober (rabljeno), Leto izdelave: 2002, obratovalne ure: 15.000 h, Funkcionalnost: popolnoma funkcionalen, For sale: 1 used punching press including gripper feed unit Manufacturer: Mabu Pressen AG Model: 32HSS Iodpfx Aetttcdjh Dstn Gripper feed unit: RC11 Year of manufacture: 2002 Operating hours: approx. 15,000 Press force: 320 kN Strokes per minute: 100 - 1000 Stroke adjustment: 5 - 40 Weight: 6,200 kg Further technical data can be found on the nameplate and in the photo documentation. Including complete documentation. Additional photos and video available upon request. The press can be inspected at our warehouse in 09599 Freiberg.

Stanje: zelo dobro (rabljeno), Soundproof enclosures. For Bruderer stamping presses. Enclosures available from stock for the following machines: BST 25 BST 41 BSTA 50 The enclosures are completely overhauled, carefully dismantled, and packaged for transport. Painted in white and anthracite (or custom colors as per customer request). The enclosure comes with all necessary perforations for easy operation of a Bruderer press. Front and rear doors with inspection window. Air ventilator for climate control mounted on the top cover. Ijdpfxoiw Icbe Ah Dstn For more information, please do not hesitate to contact us. We have Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110 as well as Mabu and Schaal stamping presses in stock.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, BRUDERER BSTA 25UL High-Speed Stamping Press Very good condition! Technical Data: ----- Tonnage: 250 kN Die installation opening: 750 mm Stroke rate: 100–1425 spm (depending on selected stroke) Itjdpfxjv I Rtrj Ah Don Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Ram adjustment range: 51 mm Die installation height: 171–239 mm (depending on selected stroke) Bolster plate: 640 x 530 mm Ram surface: 530 x 360 mm Strip feed width: 210 mm Base plate opening: 590 x 180 mm Strip entry height: 50–120 mm Strip feed direction: left to right Feed unit: BBV190/85

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150204, dolžina mize: 2.000 mm, širina mize: 1.000 mm, stiskalna sila: 100 t, hod: 300 mm, Automatic punching machine with automation TECHNICAL DETAILS Total pressing force: 100 t Stroke: 300 mm Adjustment: 125 mm Stroke bottom, adjustment top: 600 mm Stroke rate: 10 - 50 spm Control: Siemens S7 Dimensions Distance between uprights L-R: 2,020 mm Distance between uprights, lateral: 620 mm Table clamping surface: approx. 2,000 x 1,000 mm Ram clamping surface: approx. 2,000 x 900 mm Drop-through opening in table: 1,700 x 300 mm Table height above floor: 1,200 mm Itodpfxou Unmqe Ah Dsn MACHINE DETAILS Power consumption: 39 kW Overall height above floor: approx. 4,400 mm Dimensions (L x W x H): 5,166 x 2,500 x 4,400 mm Machine weight: approx. 38 t EQUIPMENT - Electrical overload protection - Two-hand operation - Schleicher straightening machine: width 650 mm, max. thickness 2.0 mm - Wanzke decoiler: max. load capacity 6 t - Helmerding feeder: width 600 mm, thickness 0.6 - 6.0 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B-control system - Table 750 mm - Adjustable stroke 13 to 38 mm - Complete documentation - Soundproof enclosure - Machine tested / overhauled, excellent condition! Ijdpfewu Sy Sjx Ah Djtn Contact us!

Stanje: generalkompletno obnovljen (rabljeno), The machine is equipped with two presses, two feeders (right and left), and a dust extractor. It also has two unwinders for tape and wire. The control system is new. Itedpfx Aowu Uvieh Dsn

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 9802, Pressure: 80 t Itodpoh Ra N Rjfx Ah Dsn Stroke rate: 100 - 1000 strokes/min Stroke: 16-63 mm Table surface: 970 x 920 mm Through-hole in table: 740 x 100 mm Ram surface: 760 x 510 mm Distance table/ram: 280 mm Compressed air: 6 - 10 bar Total connected load: 43 kW Machine weight approx.: 15.5 t Space requirement approx.: 232 x 125 x 326 cm Machine in very good condition, has not been in operation for approx. 6 years due to company closure. Equipped with KYORI GX 80 feeder, 4 vibration damping feet, separate control cabinet, additional oil cooling unit; cooling unit.

Stanje: dober (rabljeno), številka stroja/vozila: Blinie, BSTA 30 Strokes per minute: 600 spm Feed unit BBV 120/60 High-performance: 600 spm Iedpjdguhcjfx Ah Dstn Press force: 30 tons Maximum strip width: 190 mm Additional high-speed presses in stock from Bruderer – models BSTA 18, 20, 30, 200, 50 – as well as presses from Schaal and Mabu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, hod: 38 mm, vhodna napetost: 400 V, prebijalna sila: 25 t, Bruderer BSTA 25USL with BBV 190/85 - Table size: 750 mm - Adjustable stroke: 13 to 38 mm - Complete documentation - Soundproof enclosure - Machine inspected / reconditioned, excellent condition! Itjdpfx Ahjwu Rubj Den Contact us!

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: 5255, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left side Adjustable stroke (min–max): 16–40 mm Itedpecxxu Nsfx Ah Dsn Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed stamping press in three-column design, equipped with air cooler, piece counter, separate control cabinet, air clutch, and BRUDERER precision double-roll feeder, left side.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, nastavitev hidravličnega cilindra: 40 mm, vgradna višina: 2.400 mm, skupna širina: 17.000 mm, dolžina mize: 400 mm, širina mize: 400 mm, stiskalna sila: 25 t, nastavitev hoda: 17 mm, delovna širina: 200 mm, skupna masa: 2.500 kg, leto zadnje generalne obnove: 2023, moč: 0,003 kW (0,00 KM), Manufacturer: MABU Model: 25 VPR. Made in Germany. Completely overhauled in Dec. 2023. Max. force: 250 kN (25 t). Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand start and foot pedal start. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Max. tool dimensions: 400 x 400 mm. Itjdpfeq Ikhpsx Ah Den Power output: 3 kW. Power supply: 230 / 400 V. Air connection: 5.5 bar. Feed unit: Silicon SFS 200, left side. Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu Pf 1.3 control system. Front and rear safety guards with inspection window. Technical documentation and operating manual in English and German included. CE certificate and EUR-1 certificate of origin. In stock, tested and ready for shipment. Additional used machines from Mabu, Bruderer, Bihler, and Schaal available for sale from our inventory.

Stanje: dober (rabljeno), BSTA 30 Strokes per minute: 600 spm Feed: BBV High-performance: 600 spm Pressing force max.: 300 kN Maximum strip width: 190 mm Itodpfxjda Ha Ne Ah Dsn Machine overhauled, in good condition. More high-speed presses in stock from Bruderer models BSTA 18, 20, 30, 200, 50, as well as presses from Schaal and Mabu.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 41.000 h, Funkcionalnost: popolnoma funkcionalen, FOR SALE: BRUDERER BSTA 50USL High-Performance Stamping Press With Automatic Feeder BBV 190 500 kN | 100–1120 strokes/min | Fully automatic | Swiss premium quality Technical Highlights: Rated force: 500 kN Stroke rate: 100–1120 strokes per minute Operating hours: 41,000 h Itjdpowpg Rbefx Ah Den Main drive: 22 kW Control voltage: 24V DC Power supply: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment: 64 mm Work Areas: Max. tool installation width: 1100 mm Strip feed width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Adjustable strip entry height: 60–140 mm Max. strip width: 120 mm Max. feed length: 85 mm Max. material thickness: 4 mm Feed angle: 180° Machine dimensions (incl. BBV 190): Footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment: Feeding system BBV 190 – fully synchronized mechanical strip feeder Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and ram height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration into peripheral systems Condition & Delivery: Machine in excellent technical and visual condition Fully serviced and inspected Immediately available ex Europe Worldwide shipping and installation support available Contact us today for pricing and further technical details. We are happy to help you modernize your production line with Swiss precision.

Stanje: generalkompletno obnovljen (rabljeno), Maximum pressing force: 180 kN (18 tons). Stroke rate: 100 to 600 strokes per minute. Maximum strip width: 60 mm. Itedpfx Ahefmavxj Djn Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Technical air supply: 8 bar. More high-speed presses in stock, including Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses.

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 39.687 h, Funkcionalnost: popolnoma funkcionalen, Bruderer BSTA 200 High-performance stamping press. Maximum force: 200 kN (20 t) Speed range: 100 – 600 spm Year of manufacture: 1990. BBV feed unit on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Slide adjustment: 51 mm Clamping plate dimensions: 510 x 400 mm Bed opening: 400 x 160 mm Maximum tool width clearance between columns: 410 mm. Ijdpfxstraade Ah Dotn Connected load: 36 kVA Power supply: 400 V, 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Control cabinet and controller included. All original technical documentation included. Also available in stock: High-speed presses by Mabu, Schaal, Bihler, and other Bruderer models.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, nastavitev hidravličnega cilindra: 40 mm, vgradna višina: 2.500 mm, stiskalna sila: 30 t, hod: 40 mm, Automatic high-speed punching press. Machine with CE certificate and EUR1 certificate of European origin. Itedevkfmrspfx Ah Don Equipped with two synchronized double-roll feeders for strip widths from 5 mm to 150 mm. Logical interface control via PLC touchscreen. Numerically controlled punching operation (NC). With stroke and speed counter, programmable length, automatic stop. Three operating modes: Manual, single stroke, and automatic. Pneumatic clutch and brake. Operating manual in English. Press force: 300 [kN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute, up to 10 per second. Maximum strip thickness 2.5 [mm]. Centralized lubrication system. Power consumption 5.5 [kW]. Technical air pressure 5-10 [bar]. Warranty: 1 year. All information is non-binding and subject to change.

Stanje: dober (rabljeno), Leto izdelave: 1996, obratovalne ure: 51.573 h, nastavitev hidravličnega cilindra: 51 mm, dolžina mize: 510 mm, širina mize: 400 mm, vhodna napetost: 400 V, Bruderer BSTA200M High-Performance Punching Press - Max. press force: 200 kN (20 T) - Stroke rate range: 100 – 1800 spm - Year of manufacture: 1996 Feeder BBV 101/75 on the right side - Max. strip width: 160 mm - Max. feed length: 85 mm Iedsq A Uahspfx Ah Dstn Adjustable stroke: 8 / 13 / 19 / 25 / 32 / 38 / 44 / 51 mm Slide adjustment: 51 mm Clamping plate dimensions: 510 x 400 mm Bed opening: 400 x 160 mm Max. tool width between uprights: 410 mm Max. material pass-through width: 260 mm Connected load: 36 kVA Power supply: 400 V, 50 Hz Control voltage: 24 V Machine dimensions (H x W x D): 2540 x 1661 x 855 mm Machine weight: approx. 3100 kg Safety cabin is not included with the machine. Sold separately. Control cabinet and controls. Includes all original technical documentation. Other high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.