Preskušanje materialov nakup rabljenega (475)

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Iaedpfx Adjklv H Iskop Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: dober (rabljeno), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95% rH Isdsuvipwopfx Adksap Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Condition: Used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) If you have any further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), TIRA Model: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Iajdjuviumjpfx Adksp Condition: used Scope of delivery: (See picture) (Technical data and specifications are subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, mytron Type: T2240 Temperature Chamber, Water-Cooled Technical Data: External Dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test Chamber Dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test Chamber Volume: approx. 2240 l Cable Entry Ports: 2 x 100 mm right side 2 x 100 mm left side Temperature Range: –40 °C to +100 °C at 23 °C ambient temperature Temporal Temperature Consistency: +/- 0.5 K Spatial Temperature Consistency: +/- 1.0 K Cooling: Water cooling, Inlet and outlet 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration system errors Iodjvtl Hqopfx Adkjap Cooling water consumption: Inlet temperature approx. 15 °C, approx. 15 l/min, Outlet temperature approx. 22 °C (approx. 27 °C during continuous cooling) Power Supply: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power Consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each on the left and right sides of the test chamber Exhaust Connection: DN 100 mm plug-in system Safety Device: Electronic over-temperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing Window: Quintuple glazing 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data, all information is non-binding!) If you have further questions, we will be happy to answer them by phone.

Leto izdelave: 2019, stanje: dober (rabljeno), Weiss Model: WK 10/40-80 Modular Climate Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and accumulator testing (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment considerably increases safety during battery tests and supports use in development and test environments (subject to the customer’s safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The system is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: • Functional and endurance tests • Material and component testing • Pre-aging and climate simulation • Conditioning of samples • Testing of batteries and accumulators (e.g., lithium-ion) under defined environmental conditions (with appropriate customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and run automatically. The unit was in operation until recently and is fully functional. General: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Ijdoygvw Repfx Adkeap Year of manufacture: 2019 Condition: used, fully functional CE marking: available Made in Germany Control system: S!MPAC® control Webpanel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% RH Humidity accuracy: ± 5% Dimensions: External (W×D×H): approx. 3300 × 5000 × 2500 mm Internal (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Type plate & documentation Condition: used Scope of delivery: (see pictures) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Usable volume: approx. 980 litres Temperature range: -70°C to 180°C Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating rate in °C/min, -65°C to 71°C: 6.8°C Heating rate in °C/min, -65°C to 180°C: 5.6°C Heating rate in °C/min, -40°C to 85°C: 6.5°C Cooling rate in °C/min, 85°C to -40°C: 4.7°C Cooling rate in °C/min, 71°C to -65°C: 3.7°C Cooling rate in °C/min, 180°C to -65°C: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V/5P/N/PE, 35 A Refrigerants: R508B and R404A Iaedpfjixtitjx Adksp Approx. weight: 900 kg Type: Thermotron SE-1000-6-6 For your safety as a buyer, please note the following: The following procedures are carried out on all chambers we offer in advance: 1. Functional test and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, Iaedjvb Hanjpfx Adksp continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 Iaedsvb E Uqopfx Adkep T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Iedpfsx Anipjx Adkjap Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), RS-Simulators Model: KKM 110/45 Manufacturer: RS-Simulatoren Water-cooled Climate Chamber 110 m³ incl. condenser The KKM 110/45 model is part of the TKM/KKM modular system by RS-Simulators – i.e., a modular climate chamber that is assembled on site. Iaedpfx Adewwg Uvjkjp This construction offers: Modularity: Individual segments are pre-assembled and set up at the customer’s location. This makes retrofitting (more depth or additional modules) and future relocation straightforward. Technical Data Climate Chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) on the side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in the main chamber door, heated 1x (1260 x 1000 mm) in the left side wall, heated Temperature range: -40°C to +120°C Temporal deviation: ± 0.8K – 1.5K (according to DIN 50011 in an empty test chamber) Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerants: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical Data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg Important information for you as a buyer! The following items are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into 3 parts for transport (bolted design) Temperature range: -30°C to +100°C Refrigerants: 20 kg R-404A + 20 kg R-452A External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test chamber dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68 kW nominal power Voltage: 3x400V/PE Current: 135A Type: KKM 40 / 45 S Further technical details will follow! Iaedpfx Aoqw U Aajdksp For your safety as buyer, please note the following information: The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After passing all checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (We reserve the right to make changes and corrections to the technical data!) Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for handling large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Typical applications: • Industrial production • Plastics and metal processing • Component drying • Heat treatment • Testing technology / material testing • Laboratory and experimental applications The system is robustly built to industrial standards and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Max. temperature: 250 °C Temperature safety class: Iajdoytrzfepfx Adkjp TB Class 1 TWB Class 2 Chamber: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm Height: 2500 mm Depth: 2250 mm External dimensions: Width: 2900 mm Height: 3530 mm Depth: 2700 mm Load capacity: Internal housing load capacity: 400 kg Floor surface load: 1000 kg Weight Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Rated power: 54 kW Connection load: 58 kW Additional data: Minimum exhaust air volume flow: 600 m³/h Reduced exhaust air volume flow: 150 m³/h Purge time: 465 s Total vapor space: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter cut-off temperature: 280 °C Temperature setpoint limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WT11-340/40 Weiss Temperature Test Chamber, Air-Cooled Temperature range: -40°C to +180°C Temporal temperature fluctuation at the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (heating): 2.3 K/min Temperature change rate (cooling): 1.6 K/min Heat compensation: max. 1000 W Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1800 mm, Width 895 mm, Depth 1810 mm Iaodpfxsytqnqj Adksp Test chamber volume: approx. 335 liters Rated voltage: 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.9 kW Rated current: 9.0 A Refrigerant: R404A Weight: approx. 490 kg Important information for your safety as a buyer! The following steps are carried out on our listed chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for ageing, performance, and safety tests of lithium-ion energy storage systems. Special Value: The device is engineered to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What does the device specifically do? (Point 2 – Performance & Application) - Ageing tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Long-term/temperature cycling and thermal shock tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the chamber - Safe test execution under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technologies Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing facilities - Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated safety features include: - Automatic & manual CO₂ fire extinguishing system - Fire detector with optical & acoustic alarm - Mechanical double door locking (secure containment) - Spark protection inside the chamber - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g. nitrogen) - Emergency stop / manual activation of the extinguishing system - Passthrough ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur without explosion or uncontrolled propagation. It is not an abuse or destruction test unit, but a compliant, safety-oriented test chamber for realistic operational and fault scenarios. Technical Key Data: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 litres - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phases: single phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: Iaedex Sc Inspfx Adksp - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In Short – Why This Device Stands Out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market and resale appeal - Weight: approx. 285–300 kg Condition: used Scope of supply: (see picture) (Changes and errors in the technical specifications reserved!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of construction 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but a premium safety test chamber specifically engineered for aging, performance, and safety testing of lithium-ion energy storage systems. Key Benefits: The unit is designed to reliably detect, monitor, and safely contain critical battery events—suitable for tests up to EUCAR Hazard Level 5 (fire/flames, no explosion). Capabilities (Section 2 – Performance & Applications): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under specified temperatures) - Continuous temperature runs and thermal cycling tests - Testing of both unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the chamber - Safe execution of tests under realistic thermal conditions - Suitable test environment for R&D, automotive, e-mobility, and energy storage technology Ideal for: - Battery and cell manufacturers - Research & development laboratories - Test & safety labs - Automotive / e-mobility / energy storage sectors The P Plus package upgrades the KB 720 into a true battery safety test chamber: Iaedpfjx Hf A Rjx Adksp Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & audible alarm - Mechanical double-door locking for secure containment - Interior spark protection - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g., nitrogen) - Emergency stop / manual fire suppression activation - Cable entry ports for charging and measurement cables Result: The unit is rated for testing lithium-ion cells up to EUCAR Hazard Level 5, where fires or flames can occur, but without the risk of explosion or uncontrolled propagation. It is not intended for abuse or destruction testing, but as a safe, standard-compliant test chamber for real-world operational and fault scenarios. Key Technical Data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 litres - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Mains connection: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse protection: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - Exterior (W × H × D): approx. 1250 × 1950 × 900 mm - Interior (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit stands out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ fire suppression - Large chamber (≈700 l) - High market and resale appeal - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data. All information subject to verification!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), For sale: professional portable vibration calibrator from the renowned manufacturer PCB Piezotronics. Model: 394C06 Serial number: LW19236 Made in: USA This calibrator is designed for fast checking and calibration of accelerometers in industrial, laboratory, and automotive (NVH) applications. — Technical and visual condition The device is in very good condition, well maintained. The original manufacturer's seal is intact (VOID IF SEAL DAMAGED). Normal, minimal signs of use. The equipment comes from a professional measurement environment. — Features and functions • Portable vibration calibrator • RMS / PEAK mode • CAL adjustment (+ / -) • Stable reference signal for sensor verification • Battery powered – ideal for field use • High measurement repeatability and accuracy — Iodpfxjyc Igvj Adkoap Applications • Accelerometer calibration • NVH systems (Noise, Vibration, Harshness) • Industry, automotive, laboratories • Maintenance, quality control — Included in the set • PCB Piezotronics 394C06 calibrator • Original transport case • Protective pouch • Adapters / mounting accessories as shown in the photos

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Na voljo je torzijski merilnik EasyDur za preizkušanje materialov. Merilno območje: 0,2 Nm / 2 Nm / 5 Nm / 50 Nm, zmogljivost dinamometra: 200 kg. Dokumentacija je na voljo. Možen je tudi ogled na lokaciji. Ijdpfxsyr Rwvo Adkjap

Stanje: pripravljen za uporabo (rabljen), Binder KB-115 hladilni inkubator / toplotna pečica Zunanje mere: D 83,5cm x Š 68cm x V 85cm Notranje mere: D 60cm x Š 40cm x V 46cm Iaedpfoynhp Ujx Adksp Temperaturno območje: -10°C - 100°C Nazivna napetost: 230V Vabimo vas na ogled. Prejmete pravilni račun. Za tuje stranke lahko izstavimo tudi neto račun. Pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi druge naše ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in služijo le za identifikacijo in opis izdelkov. Možna so odstopanja od tehničnih podatkov ter napake v opisu izdelka, ki si jih pridržujemo.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Binder VDL 115 (2025) laboratory vacuum chamber, like new, demo machine Iajdpfx Ajvq I Tnjdkjp Model: Binder VDL 115 Year of manufacture: 2025 Condition: as new – showroom model, after factory testing Capacity: 115 litres Power supply: 230 V Availability: immediately Warranty: yes, 2 years on spare parts, paid service available separately VAT invoice: yes Location: Grabina 92-701, Poland Optionally: transport — Description: For sale: Binder VDL 115 vacuum chamber, designed for drying organic solvents and flammable substances under vacuum conditions. This is a VDL series safety model, compliant with ATEX requirements and suitable for operation in explosion hazard zones (class 3). The unit has only been used for demonstration purposes – it’s in perfect visual and technical condition and comes with complete documentation. — Key parameters: • Temperature range: from +9°C above ambient temperature up to +200°C • Usable capacity: 115 litres • Chamber interior in stainless steel (1.4571) – chemically resistant and easy to clean • Controlled, safe vacuum with adjustable level • Complies with ATEX 2014/34/EU, safety class 3 • Control via LCD display, programmable parameter regulation • Standard delivery includes 2 aluminium shelves + inert gas valve — Applications: • Pharmaceutical and chemical industry • R&D laboratories • Drying solvents, non-reactive materials, temperature-sensitive samples • Manufacturing of electronic and precision components — Why is it worth it? • Like-new condition – as new • No signs of use, complete technical documentation • Perfect alternative to a new unit – no lead time • Attractive price, possibility to inspect or have a remote demonstration

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Binder FP 400 Laboratory Dryer Year of manufacture: 2023. Like new, unused. 2 years warranty on spare parts BINDER FP 400 Material Test Chamber The BINDER FP 400 material test chamber is specifically designed for demanding applications in biological, chemical, medical, and food industry laboratories. It features extremely precise temperature control and uniform temperature distribution throughout the interior. Thus, the unit forms an ideal basis for repeatable material tests, stability studies, cultivation, or development processes. Compared to similar test or climate chambers, it stands out for its high performance, energy efficiency, and user-friendly design, which greatly simplifies daily laboratory processes. Technical features and advantages for laboratory use: The advanced FP 400 technology meets the highest standards for safety, energy efficiency, and ease of use. This material test chamber enables precise control of temperature conditions across a wide range of test and development processes – from microbiological cultures and chemical reaction studies to stability tests for sensitive samples. Key technical data at a glance: Temperature range: approx. 5°C above ambient up to max. 300°C Internal capacity: 400 liters; maximum load: 90 kg total (up to 35 kg per shelf) Temperature deviation over time: ±0.3 K; spatial temperature deviation: 1 K at 70°C, 2.5 K at 150°C, 4.8 K at 300°C External dimensions: 1235 x 1025 x 765 mm (W x H x D); internal dimensions: 1000 x 800 x 510 mm (W x H x D) Power supply: 400 V, 3 N~, 3.4 kW, 50/60 Hz Energy consumption: 520 W (70°C), 1200 W (150°C), 2340 W (300°C) Protection class: IP 20 acc. to EN 60529, certified to DIN 12880 Iaedoyt A Enopfx Adkop Additional features: - Interior made of high-quality stainless steel — ensures maximum durability and easy cleaning - Digital temperature display and intuitive operation via ergonomic control panel - Practical door lock; quiet operation; low noise level - Environmentally friendly and energy-efficient operation thanks to low energy consumption and modern insulation concept - Flexible interior configuration with optional shelves and drawers (up to 10 shelves can be installed) - Double inner glass doors allow quick visual checks without affecting temperature levels - Optimized airflow ensures optimal temperature uniformity - Easy to transport and install thanks to compact design and ergonomic handle The steam chamber offers a large capacity of 498 liters, and the advanced air replacement system (16–18 air exchanges per hour depending on temperature) ensures rapid stabilization of conditions. The recovery time to target parameters after brief door openings remains minimal, even at high temperatures – a crucial benefit for frequent use in routine operations. Compliance with globally recognized DIN 12880 and EN 60529 (IP 20) standards guarantees safe and standards-compliant daily operation. As such, this device is perfectly suited for quality control laboratories, industrial testing purposes, and academic research projects requiring maximum precision.

Stanje: zelo dobro (rabljeno), RMS Elektrodinamična preizkuševalna naprava za vibracije Vzbujevalnik vibracij SW 3006+ Ojačevalnik moči TGA 1500 Tehnični podatki: Sinus: 3,7 kN Šum: 3,7 kN Sunek: 3,7 kN Premik pk-pk: 26 mm Hitrost: 0,9 m/s Isdpfx Adehyly Rjksap Pospešek: 80 g Hlajenje: zračno hlajenje Stanje: rabljeno Nepreverjeno! Preizkusi niso bili možni Obseg dobave: (glej sliko) (Spremembe in napake v tehničnih podatkih pridržane!) Za dodatna vprašanja nas pokličite.

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), WM1 300 CNC Iedjyuut Tspfx Adksap 3-osni CNC krmilnik Visokoločljiva CCD matrična kamera 1,5-kratna povečava Osvetlitev od zgoraj z diodnim obročem, 4 sektorji in 1 obroč posamično preklopljivi Precizna merilna miza v X in Y osi Diodni laser kot pomoč pri pozicioniranju Ročica (joystick) in kroglična sledilna naprava (trackball) za premik osi s hitrim/počasnim preklapljanjem Zajem merilnih podatkov s pomočjo kamere Natančno zaznavanje robov pri prehodni in odbojni svetlobi s pomočjo pametnih algoritmov za obdelavo slik Majhna in priročna – zmogljiva Hitro rokovanje z najvišjo merilno natančnostjo

Stanje: zelo dobro (rabljeno), RMS Tip: SW 3509 + ojačevalnik TGD 6000-000.00 in ventilator RMS Elektrodinamična vibracijska preizkusna naprava Tehnični podatki: Sinus: 7,5 kN Šum: 6,7 kN Udar: 13 kN Hod pk-pk: 25,4 mm Hitrost: Sinus 1,5 m/s Šum 2,5 m/s Udar 2,5 m/s Pospešek: 100 g Iajdpfx Adohylymekep Hlajenje: zračno hlajenje Skupna teža ca. 4000 kg Stanje: rabljeno Obseg dobave: (glej sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja nas lahko pokličete.

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Universal Testing Machine PM5 Isdsydanhspfx Adkoap Force: 5 kN Crosshead Stroke: 520 mm Test Chamber Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Displacement Resolution: 0.01 mm Test Speed: 1-500 mm / min Return Speed: 700 mm / min Load Cell: 5 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for „quick testing“ without the need for a PC. For tests requiring data storage and curve recording, our basic software provides options for control and evaluation. This allows for generating various test procedures and creating a test report. In addition, you can further process the raw data in your own programs. Options: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2025, stanje: novo, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Space: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Travel Resolution: 0.01 mm Testing Speed: 0.03–1000 mm/min Iedsydazuspfx Adkoap Return Speed: 1000 mm/min Load Cell: 50 kN Includes evaluation electronics and base software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without a PC. For tests requiring data storage and recording of the curve progression, our base software provides control and evaluation capabilities. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Gripping fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.