Izravnalne in upogibne stiskalnice nakup rabljenega (55)

Stanje: zelo dobro (rabljeno), Tehnični podatki: Pritisna sila: 500 ton Razdalja med stebri: 4300 mm Dimenzije (dolžina x širina x višina): pribl. 5100 x 900 x 4300 / 5600 mm Itsdpfoxgbllsx Af Tjb Za prevoz (dvodeljno): Dimenzije: 2 x 5100 x 900 x 3050 mm Teža: 1x 15.700 kg – 1x 13.200 kg (skupaj 28.900 kg) Prodajalec ne prevzema odgovornosti za tiskarske ali prenosne napake. Stroj je po videzu, tehniki in obrabi primeren starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Leto izdelave: 1960, Stanje: rabljeno, R.A.S. spindle arbor press Itedpeic Rn Uefx Af Tsb Type 200-20 Machine No. 117/6 Stroke: 200 mm Pressing force: 20 t Spindle diameter: 60 mm

Leto izdelave: 1991, Stanje: dober (rabljeno), Hydraulic horizontal straightening and bending press Maximum pressing force: 160 t Manufacturer: MAE, Type: HY RI 160 RH, Year of manufacture: 1991. Itedpfx Aecffzaof Tjb For further technical specifications, please refer to the data sheets.

Stanje: rabljeno, Industrijski stroj za ravnanje, ravnalnik stabilizatorjev, stroj za upogibanje, rabljena oprema Proizvajalec: Schneider Tip: Richtmaschine Stabilisator Leto: 2016 Električni podatki: 400V, 16A Itodpexnq Dtofx Af Tsb Skupne mere: Širina: 1900 mm Globina: 1250 mm Višina: 1660 mm

Stanje: novo, številka stroja/vozila: DF0178, Pressure: 500 t Table length: 3,500 mm Table width: 3,500 mm Maximum stroke: 3,600 mm Dimensions (L x W x H): 8,500 x 3,700 x 8,500 mm Return force: 50 t Weight: 250 t Upper tool tiltable: 180 degrees Table swiveling speed: max. 33 mm/sec Table extendable: 3,800 mm Movable table speed: 33 mm/sec Maximum table load: 100 t Drive power: 65 kW Voltage: 400 V Control voltage: 24 V Itedpfsfxyh Usx Af Tob Frequency: 50 Hz Adjustable working speed: 0 - 10 mm/sec Feed speed: 0 - 10 mm/sec Return speed: 0 - 25 mm/sec Rapid traverse speed: 0 - 10 mm/sec Oil tank: 800 l Ram height: 1,300 mm Table height: 700 mm Hydraulics and tank on top of press: included? All-round maintenance platform: included? Side panels: included? Siemens S7 1500: included?

Stanje: novo, Leto izdelave: 2019, Pressure: 275 t Itedpsfxyigefx Af Tsb Distance between uprights: 3,000 mm Total power requirement: 30 kW Machine weight approx.: 40 t Retraction force: 27 t Maximum pump capacity: Axial pump with proportional valve Bridge travel distance: 6,000 mm Lateral travel range of the cylinder: max. 3,000 mm Table size: 6,000 x 3,000 mm Table height above floor approx.: 700 mm Maximum distance table to ram: 1,100 mm Oil tank: 450 l Bridge travel speed: on X and Y, 30-33 mm/sec Cylinder lowering speed: 2-10 mm/sec Cylinder stroke speed: 2-50 mm/sec Cylinder stroke: 900 mm Cylinder diameter: 440 mm Ram extension: 200 / 200 mm / Ø Cylinder moves via a servomotor using rack and pinion: 40 mm Control system Siemens: S7 1200 Siemens Monitor 9": Touch Panel Control panel: portable

Stanje: novo, številka stroja/vozila: DF0177, Press force: 315 t Table length: 2,500 mm Itsdpfxefxyhio Af Tjb Table width: 1,800 mm Maximum stroke: 800 mm Dimensions (L x W x H): 3,910 x 4,905 x 4,169 mm Weight: 36 t Column diameter: 220 mm Drive power: 25 kW Adjustable working speed: 1 - 10 mm/sec Return speed: 1 - 25 mm/sec Oil tank: 450 l Hydraulics and tank on top of the press: not included Maintenance platform around hydraulics: not included Side paneling: not included Light curtains front and rear: not included Siemens S7 1200: included Siemens S7 1500: not included Rear double door with monitoring: not included Right-side monitored door: not included Left-side monitored door: not included

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0230, Pressure: 200 t Column gap: 1550 mm Stroke: 400 mm Dimensions (L x W x H): approx. 4400 x 3250 x 4100 mm Table size: 1500 x 1500 mm Distance table to bottom of ram: 1590 mm Return force: 20 t Total power requirement: 20 kW Electric oil cooling max.: 1.5 kW Iedpfx Afsfxyklj Tjtb Stroke speed: 25 mm/sec Descent speed: 10 mm/sec Oil tank: 250 l Table plate thickness: 120 mm Table cutouts with distance rings: 550, 450, 350, and 200 mm Table speed: 30 mm/sec

Stanje: novo, Leto izdelave: 2019, Press force: 400 t Upright distance: 2,500 mm Stroke: 600 mm Table size: 2,500 x 2,000 mm Distance table - ram (bottom dead center): 600 mm Iodjd Ttydopfx Af Tetb Total power requirement: 18 kW Forward speed: 9 mm/sec Return speed: 19 mm/sec Pump capacity: 67 L/min Total weight approx.: 26 t

Stanje: dober (rabljeno), Leto izdelave: 2007, Znamka: SCHIAVI Model: HFBs 100/3 Nazivna sila: 100 ton Dolžina miz: 3110 mm Širina delovne mize: 90 mm Delovna višina brez dviga: 910 mm Največja razdalja med mizami: 450 mm Nazivni maksimalni hod: 250 mm Globina labodjega vratu: 405 mm Razdalja med stebri: 2700 mm Maksimalni tlak: 303 MPa Itjdpfx Afsxaz Igo Tob Količina olja: 126 dm³ Največja dolžina (zasedeni prostor): 4000 mm Moč motorja: 7,5 kW

Stanje: novo, Leto izdelave: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T 800 - Press force: 80 tons - With semi-automatic control Control unit (99 programs with up to 16 steps each) Including bending pin (without punch) Including tool holder for dies and foot pedal - Stroke adjustment infinitely variable from 0-300 mm - Working speed adjustable Maximum working stroke: 10 mm/sec Return stroke: 20 mm/sec - Hydraulic pressure adjustable - Maximum tool height: 300 mm - Motor power: 7.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 940 mm - Enclosed table - Replaceable wear plate - Weight: 2100 kg - Bending capacities: Flat material up to 300x32 mm with Vmax Isdpfx Asd A Nc Djf Tetb Round tube: 3/8" – 3"

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 201805015, delovna dolžina: 4.100 mm, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 300 mm, skupna širina: 1.550 mm, skupna dolžina: 3.560 mm, skupna višina: 2.850 mm, stiskalna sila: 185 t, skupna masa: 18.000 kg, potrebna višina: 3.440 mm, dolžina mize: 4.100 mm, vgradna višina: 500 mm, Little-used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic front supports ESA 660W CNC control LAG press brakes embody the synthesis of Italian technological innovation, attention to detail and design, and extensive Chinese manufacturing capabilities. These values, combined with top-quality European components, allow LAG to offer its customers press brakes, shears, and insertion machines with the best price-performance ratio on the market. This is the top-of-the-range press brake, equipped with accessories and automation for high-profitability performance. Main standard configuration of the G-TOP press brake: - G-FLEX crowning compensation system Iodpfx Afewync Hs Tetb - G-CS active crowning system - 6 axes (Y1-Y2-X-R-Z1-Z2) - Double pump: one main power pump for the machine operation, one for crowning management - DSP AP safety system - Touch-screen control panel housed in electric cabinet - Sliding front support arms - Touch-screen numerical control - 4-axis (X-R-Z1-Z2) reference rear backgauge model GRP-4

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, številka stroja/vozila: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t Space requirement approx.: 8,800 x 1,800 x 2,200 mm Pressure adjustment via rotary control, infinitely variable: 15-150 t Cylinder diameter: 100 mm Pressing speed (infinitely variable via joystick): 0-9.9 mm/s Servo motor: 2 kW Cooling unit: 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two hydraulic cylinders. The straightening machine is set up for the respective material type by exchangeable rounded spacer elements. The ten inserts are changed manually by simply sliding them into the retaining grooves. The scope of delivery includes a basic set for one profile. The program for the respective profile is then called up on the monitor. The monitor displays the ideal line along with a rising and falling millimeter scale with 0.5 mm divisions. The profile to be straightened is placed on the table to the left, pushed against a stop, and clamped in place using a quick-clamping device. Both the stop and the quick-clamping device are quickly adjustable and mounted on a clamping plate. This clamping plate travels on a linear guide from left to right and vice versa. Movement is provided by a chain drive and a servo motor. The motion is initiated via a joystick on the control panel. Once the profile is clamped, the operator moves the clamping plate with the joystick into the press. The travel speed is up to 100 mm per second but can be continuously decreased to 10 mm per second; for this, it is sufficient to only lightly move the control lever. A high-resolution camera now displays the profile in the press. The operator can see precisely any deviation from the ideal line. Depending on requirements, the operator pushes or pulls the profile to achieve the desired accuracy. They then slowly move it further through the press while detailed feedback on the monitor shows if the profile is now straight. As needed, further corrections can be made by moving forwards or backwards. Once the profile is straightened, it exits the press on the right and can be removed. The clamping plate can then be returned to the loading position on the left, or—in order to save time—may be loaded from the right. Isdpfxjfxygwj Af Tjtb Operation of the press is permitted only under the following conditions: Permissible ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Installation site elevation above sea level: + 1,000 m Permissible mains fluctuations: +/- 10%

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 700 mm, stiskalna sila: 16 t, delovna višina: 1.050 mm, višina središča: 1.050 mm, Avtomatska ravnalna naprava, mehansko generalno obnovljena, dobi novo krmiljenje SIMATIC S7-1500, Drive Controller CPU 1504D TF. Maksimalna razdalja med konicama 500 mm, ravnalna sila 16 t, hod ravnanja 20 mm, prazni hod 95 mm, delovna višina 1050 mm, priključna moč 10 kVA, povprečna poraba 1,3 kW. Možnost: Stroj je lahko opremljen z dvižnim transporterjem (skozi stroj), po želji kupca tudi z dovodnimi/odvodnimi trakovi ter z varnostno ograjo. Trenutno je stroj opremljen z eno ravnalno postajo, možna je razširitev. Isdpfx Afexldiqe Totb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T500 with 1500 mm long straightening beam - Press force: 50 tons - Semi-automatic control system (99 programs, each with up to 16 steps) - Includes bending pins (without punch) - Includes tool holder for dies and foot pedal - Infinitely variable stroke adjustment: 0–300 mm - Adjustable working speed Working stroke max. 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 900 mm - Enclosed table Itedpfxjdk H A Ie Af Teb - Interchangeable wear plate - Weight: 1300 kg - Bending capacities: Flat material: 300 x 15 mm Flat on edge: 60 x 15 mm Round tube: 3/8"–2 1/2"

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Itedpfx Afjt Hw Amj Tjb Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Ijdpfx Afst Hwwdo Totb Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: rabljeno, Leto izdelave: 1989, Sheet width: 150 mm Number of straightening rollers: 4 Number of feed rollers: 2 front + 2 rear Itodecxxvmspfx Af Teb Roller diameter: 60 mm Space requirement approx.: 1.8 x 0.7 x 1.4 m

Stanje: zelo dobro (rabljeno), Pressure 6.3 t Reach 200 mm Stroke 200 mm Ijdpfswuu A Asx Af Totb Maximum installation height 500 mm Table clamping surface 450 x 420 mm Machine weight approx. 1.5 t Space requirement approx. 1.2 x 0.6 x 2.0 m Two-hand operation, various attachments

Stanje: rabljeno, BRACKER RN 280 RADIALNA KOVALNA STISKALNICA ZA KOVICE PROIZVAJALEC: BRACKER, IZDELANO V ŠVICI MODEL: RN 280 ZMOGLJIVOST (PREMER STEBLA KOVICE PRI NATEZNI TRDNOSTI 370N/MM²): 1,0 mm – 12,0 mm DELOVNI TLAK: 14 – 88 PSI MAKS. KOVIČENJE (PRITISK): 340 KG ČAS KOVIČENJA: 0,1 – 5,9 SEKUND DELOVNI HOD: 5,0 mm – 40,0 mm POGONSKI MOTOR: 0,74 KM NAPAJANJE: 220V, 3-FAZNI TOK TEŽA STROJA: 340 KG DIMENZIJE STROJA (d x š x v): 1220 x 915 x 1930 mm DODATNO: - BRACKER NOŽNI PEDAL ZA AKTIVACIJO - ROČNA NASTAVITEV VIŠINE RADIALNE KOVALNE GLAVE NA DVOJEM PRAVOKOTNEM VODILU Iodpjwh N H Nsfx Af Totb - NASTAVITEV PRITISKA Z MANOMETROM

Stanje: pripravljen za uporabo (rabljen), Maximum forming capacity at full length: 9 gauge (mild steel), equivalent to approx. 3.8 mm; max. forming length: 3200 mm; minimum flange height: 6 x material thickness; clamping beam speed: maximum speed: 91.44 mm/s, downward: 39.88 mm/s; bending speed: 1879.6 mm/s; bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160 mm / 2220 mm / 1780 mm; weight: approx. 5300 kg. Iodpfx Afetia Hhs Tetb

Stanje: dober (rabljeno), Manufacturer: Ursviken Type: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Hydraulic press for the production of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table & ram in X direction Extensive die set package with radii: 10/20/30/50/60/80/100 mm Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine embedded 2,350 mm below ground level Specifications: Metric | US Standard Capacity: 1,000 t Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Itjdpfx Afekvmi Se Tjb Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (approx.): Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information provided on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations shall be assumed. We recommend verifying all critical details.

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Iodsf Sqckjpfx Af Tjtb Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: novo, Pressure 500 t Column clearance 600 mm Stroke 600 mm Itjdpjfv Awhsfx Af Tsb Table surface 3500 x 1500 mm Distance cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on the bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely machined with a CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet per EN standards - All cables are labeled and neatly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EU safety standards 2006/42/EC Machinery Directive, EN ISO 16092-1 and 16092-3 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION - Price includes transport costs, installation, and training at the customer's facility. - Hydraulic oil is not included in the price. - All handling costs (e.g. crane, forklift, etc.) are to be borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer's warranty. - This warranty includes delivery of all spare parts required for repair and a service visit for the machine. Damaged parts will be returned to the manufacturer after being replaced with a new part. - This warranty does not cover parts damaged due to improper use.

Stanje: novo, Press force 300 t Working speed 3-8 mm/sec Stroke 500 mm Return speed 15 mm/sec Table size 3000 x 1500 mm Tank capacity 45 l Travel path x / y 2600 x 1000 mm Clearance 500 mm Total power requirement 18.5 kW Machine weight approx. 18 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely milled with CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump from Bosch Rexroth - Hydrapack or Badeston hydraulic valve Itsdpfevxw Hmjx Af Tob - Hydraulic block according to EN standards - Hydraulic oil tank (xxx liters) - Pressure adjustment via pressure transmitter/controller ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive and EN ISO 16092-01 ,16092-03 - Two-hand control operation - Reset and emergency stop button - Safety cable with switch around the press 4. TRANSPORT AND INSTALLATION - The price includes transport costs, installation, and training at the customer’s plant. - Hydraulic oil is not included in the price. - All handling costs (such as crane, forklift, etc.) are borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer’s warranty. - This warranty includes the delivery of all spare parts required for repairs and service calls to the machine. Damaged parts must be returned to the manufacturer after replacement. - This warranty does not cover parts damaged by improper use.