Preizkusne mize nakup rabljenega (28)

Stanje: rabljeno, Leto izdelave: 2003, Pozicija vsebuje: (1) Profilometer Godpex E Tmnsfx Ab Tokf

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.400 mm, skupna dolžina: 3.500 mm, skupna višina: 800 mm, skupna masa: 7.500 kg, Measuring plate from CMM dismantling with leveling feet Gedju Uiitjpfx Ab Tekf

Stanje: rabljeno, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion and other battery pack qualification. Gkedpfxowwrxas Ab Tsf Particularly suited for: - Lifetime testing, BMS verification, and validation of complex charge cycles - High energy recovery – up to 85% efficiency - Flexible expansion through many channels or higher current ranges - Enterprise-level operation thanks to comprehensive safety features and data persistence Technical Data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge testing) Power per channel: 600 W to 60 kW (modular, scalable) Total power: Up to 600 kW (depending on configuration) Voltage ranges: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measurement data): Up to 50 kHz (with BatteryPro) Data recording: Cyclic, 10 µs – 1 s / Storage for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, Pulse, Drive Cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Regenerative capability: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recovery Temperature monitoring: Optionally integrable, range 0–90 °C ±2 °C Dimensions & Weight: Depending on configuration (e.g. 19″ rack, ca. 300 kg) Power supply: 3-phase, 400 V AC (depending on model) Application areas: E-mobility, battery development, quality assurance, cell research Weight: ca. 455 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 2016, skupna širina: 1.250 mm, skupna dolžina: 2.500 mm, skupna višina: 250 mm, skupna masa: 800 kg, potrebna višina: 1.000 mm, Measuring table, granite, on leveling feet, last inspection 09/2000, very good condition Gkedpfstvmdnex Ab Tsf

Stanje: rabljeno, ESD-elektrostatično zaščitna delovna miza HANDKE Industrie Technik Višinsko nastavljiva delovna miza, delovni pult Posamično delovno mesto E(lectro) S(tatic) D(ischarge) Dolžina mize: 1100 / 1700 mm Gjdpfoxf Uq Sex Ab Tokf Globina mize: 600 mm Dolžina zložljive mize: 600 mm Delovna višina: od 830 do 1200 mm - Volumensko prevodna ESD delovna plošča: 40 mm - Delovna plošča s hidravličnim dvižnim sistemom - Nastavitev višine preko hidravlične ročne črpalke - Stabilen osnovni okvir iz aluminijastega sistemskega profila - Premišljiva na 4 majhnih kolesih (vrtljiva kolesca) - Stabilen nosilec za monitor ali hrbtno pločevino - 1 kos predalnika Š x G x V = 675 x 210 x 40 mm - 1 kos omarica pod mizo Š x G x V = 160 x 580 x 560 mm Skupne mere D x Š x V: 1200 x 660 x 1560 mm Teža: 90 kg Zelo dobro ohranjeno, kot novo Na voljo 2 kosa Cena na kos

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Na voljo je stožčasto zobniško preskusno stojalo Gleason. Premer obdelovanca: 330 mm, maks. razdalja med središči: 203 mm, razpon razdalje nosu pogonske vretenaste osi: 100 mm-250 mm, maks. premik gor/dol: 203 mm/50 mm, premer izvrtine pogonske vretenaste osi: 99 mm, stožčavost pogonske vretenaste osi: 15,5 mm/m, premer izvrtine proti vretenu: 58 mm, stožčavost proti vretena: 12,7 mm/m, hitrost vretena: 1500 obr/min, preizkusni kotni razpon: 0°-180°, ponovljivost pogonske vretenaste osi: +/-0,004 mm, krožnost: +/-0,003 mm, dimenzije stroja X/Y: cca 1550 mm/2050 mm, teža: cca 2400 kg. Ogled na lokaciji je možen. Gjdpfxexltu Ne Ab Tjkf

Stanje: rabljeno, Table clamping surface: 228 x 273 mm 3 T-slots: 12 mm Between them, 4 x 4 threaded holes: M8 Table height at zero position: 146 mm Required space: 250 x 290 mm Gksdpfx Aobbgcxsb Tjf Weight: 41 kg

Stanje: dober (rabljeno), Granitna merilna plošča 760 x 1190 x 700 mm Gkjdpfjxl Rkujx Ab Tsf Mere: V x Š x G 760 x 1190 x 700 mm Debelina materiala: 800 mm Druge artikle – nove in rabljene – najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: rabljeno, Chroma Tip: ATE 17011 Mere: Š x G x V 600 x 800 x 1760 mm Regenerativni tester celic (5V/100A x 12 kanalov) Napajanje: 400V/50 Hz 24 kVA Podatkovni zapisovalnik (64 kanalov) Godpfx Abjwwrn Ue Tjkf 8-portna senzorska kartica Modul 17212R-5-100 Maks. 5V / 100A Največje število kanalov: 12 (fiksno) Možnost vzporedne povezave: 200A, 300A, 400A, 600A, 1200A V Nastavljivo od 0 mV do 5000 mV * 1, ločljivost 1 mV A Nastavljivo od 0,01 A do 100,00 A, ločljivost 0,01 A Priključek: 400V/50Hz, 5 kablov 24 kVA Teža: 250 kg Stanje: rabljeno Obseg dobave: (glej sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, For sale is a Jenoptik test bench, model T8000 Wavemove, designed for housing surface inspections. The unit was used as specified for surface inspection of housings and is in good to very good condition. Gkedsmfty Hepfx Ab Tef Year of manufacture: 2017 Weight: 2,500 kg The offer includes all visible components, as well as the computer and software. Loading and/or shipping available at extra cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or additional contact options, please visit our website.

Stanje: rabljeno, Programmable AC Power Source / Voltage Regulator Laboratory Power Supply, Power Source, Programmable AC Power Source CHROMA Model 6415 Item No.: 641500000 363 Year of Manufacture: approx. 2000 Input specifications: Input voltage: 190 ~ 250 V AC Input frequency: 47–63 Hz Input current: Max. 12 A Output specifications: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Maximum output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Gkodedz Srbjpfx Ab Tof Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45–500 Hz 1.0% for frequencies >500 Hz – 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45–1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurements: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for true RMS voltage, true RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM storage for user-defined voltage and frequency combinations, retrievable at any time - Optional GPIB, RS-232, and analog programming interface - Over-voltage, under-voltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature-controlled fan speed - Self-test upon power-up Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required (H x W x D): 221.5 x 425 x 567 mm Net weight: 23 kg Good condition 2 units available, price per unit

Stanje: rabljeno, 18236-140*2, B56Hx140/1P-SC-Y 4x2 1/2"(54), Swep, brazed plate heat exchanger Model: 18236-140*2 Type: B56Hx140/1P-SC-Y 4x2 1/2 Godpfx Asthfnveb Tskf Condition: Used

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna širina: 700 mm, skupna dolžina: 1.400 mm, skupna višina: 500 mm, skupna masa: 2.000 kg, potrebna širina: 700 mm, zahteva za prostor dolžina: 1.400 mm, potrebna višina: 850 mm, Attention: only inspection plate from CMM dismantling with table frame Gjdpfx Aevfn Ihjb Tskf

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), Used oil test stand Gksdoh Rnq Tjpfx Ab Tsf Manufacturer: SWEP Model: B 5x10 Dimensions (LxWxH): 115 x 105 x 115 cm Weight: 132 kg

Stanje: dober (rabljeno), Thyssen Surface Plate / Inspection Plate made of Natural Hard Stone Length: 3000 mm Width: 1500 mm Thickness: 300 mm Gedpfxjihfm He Ab Tokf Flatness Tolerance according to DIN 876/0 Nominal Value: 16 µm Actual Value: 13.3 µm ID No.: 14286 2 x T-slots With support frame 6 x Wenzel Precision Roller Stands Cylindricity Test Device With adjustable height Heavy-duty version With T-slot nuts High precision due to backlash-free mounted roller bearings Roller stand height adjustable for diameter compensation RRP per pair: €1890 More surface plates – in different sizes, new and used – available in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, For sale is a Jenoptik test table, model T8000 Wavemove, suitable for housing units. The machine is in excellent condition, fully operational, and comes with numerous additional attachments. Year of manufacture: 2000 Weight: 2,500 kg The offer includes all visible components as well as computer and software. Loading and/or shipping available at extra cost. All prices are exclusive of VAT. Inspection by appointment is possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale Gedpfxsvkxa Ej Ab Tokf PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information and contact options, please visit our website.

Stanje: rabljeno, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurements ELABO type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for measuring dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations pursuant to EN60204, Part 1. Serial No.: 0064016 Year of construction: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V delivers a highly stable DC voltage with low ripple. One output terminal provides high voltage, the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of construction: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression to VDE 0871 Rated power: 14 W Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial No.: 0097588 Year of construction: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Gjdpef Axn Aefx Ab Tokf Rated current: 1 A Number of test points: 5 - Compact unit on mobile rack - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many more ELABO devices available under stock numbers 57819, 57820, and 57821

Stanje: rabljeno, IR50, JenLas® disk IR 50, JENOPTIK disk laser Model: IR50 Type: JenLas® disk IR50 Condition: Used Gkedpfx Abora D Drs Tjf

Stanje: dober (rabljeno), Material testing station / final inspection consisting of the following main components: Keyence XG-H500M Digital 5-megapixel B/W Camera Keyence XG-7701P Multi-camera image processing system/control unit Keyence CA-DC21E Lighting controller Opto Engineering TC23096 Bi-telecentric lens --- Keyence XG-H500M Digital 5-Megapixel B/W Camera CCD: 2/3-inch monochrome CCD, square pixel arrangement. 11x readout, 5,050,000 pixels. Scan Method: Progressive (61.2 ms), interlaced (40.3 ms). Interlaced is a binning process that integrates odd and even lines. Model CA-DC21E Lighting Controller Type: Lighting controller. Only for XG/CV-5000/CV-X200/CV-X100 series. Input: Forced shutdown of lighting: max. 26.4 V, min. 2 mA Output: Gksdpfx Abog Sxmfe Tjf Light control methods: (1) Constant voltage regulation (DC lighting) (2) Pulse width modulation (emission frequency: 100 kHz) [adjustable by controller settings] Brightness levels: 255-step digital [adjustable by controller settings] Number of connections: 2 channels (for LED connection and terminal strip available) Voltage: 12 VDC / 24 VDC [selectable via DIP switch] Output Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output / continuous lighting [adjustable by controller settings] Response time: (1) Constant voltage: Max. 10 ms at 12 V output, Max. 20 ms at 24 V output (2) Pulse width modulation: Max. 1 ms at 12 / 24 V output Display: LED indicator Supply voltage: 24 VDC ±10% Current consumption: 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 --- Keyence XG-7701P Multi-camera Image Processing System/Controller --- TC23096 Bi-telecentric Lens for 2/3" Detectors, Magnification 0.093x, C-Mount Magnification (×): 0.093 Image Circle Diameter (mm): 11.0 Max. detectable size: 2/3" Working distance (mm): 278.6 wF/#: 8 Typical Telecentricity (max) (deg): < 0.06 (0.08) Typical Distortion (max) (%): < 0.04 (0.08) Depth of Field (mm): 77 CTF 70 lp/mm (%): > 40 Field of View (FOV): with 1/3″ detector (4.8 x 3.6 mm): 51.61 x 38.71 mm with 1/2.5" detector (5.70 x 4.28 mm): 61.29 x 46.02 mm with 1/2″ detector (6.4 x 4.8 mm): 68.82 x 51.61 mm with 1/1.8″ detector (7.13 x 5.33 mm): 76.67 x 57.31 mm with 2/3" - 5 MP detector (8.50 x 7.09 mm): 91.40 x 76.24 mm Dimensions: Mount: C Phase adjustment: — Length (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 --- Complete plant closure, large selection of mezzanine floors, pallet racks, shelving systems, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. See more items – new and used – in our shop! International shipping costs on request!

Stanje: rabljeno, Programmable AC Power Source / Voltage Regulator Laboratory Power Supply, Power Supply Unit, Programmable AC Power Source CHROMA Type 6415 Serial No.: 64150296 Year of manufacture: approx. 2000 Input Parameters – Input voltage: 190 ~ 250 V AC Input frequency: 47-63 Hz Input current: max. 12 A Output Parameters – Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 – 500 Hz, 1.0% for frequencies >500 – 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 – 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor, and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232, and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature, and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Delivered as shown, without additional accessories or connection cables Additional Connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Gksdpfx Aedz Sraeb Tsf Dimensions (H x W x D): 221.5 x 425 x 567 mm Net weight: 23 kg Good condition

Stanje: dober (rabljeno), Bosch Starter Durability Test Bench The machine is an in-house Bosch production. It is used for testing the service life and durability of starters (also known as starter motors) for engines. Manufacturer: Bosch Gkedjg Ith Ropfx Ab Tsf Type: Starter Service Life Test Machine Condition: Used Complete factory closure, large selection of mezzanine platforms, pallet racking, shelving systems, carousel storage systems. High-quality industrial machinery, lathes, grinding machines, hand tools Further items – new and used – can be found in our shop! International shipping costs on request!

Stanje: rabljeno, Test bench, test station, measurement station, test device, measuring device, tester for HV, PE, IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage tester The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other terminal is earth-referenced and can be set to a potential up to 300 V max. Serial no.: Year of manufacture: 2005 Supply voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Gedpfx Abod Dc Uno Tekf Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices under stock numbers 57820 and 57821

Stanje: dober (rabljeno), Wenzel Roughness and Contour Measuring Station for Crankshafts Measuring Plate made of Granite Length: 3670 mm Width: 850 mm Flatness Tolerance according to DIN 876/1 Target Value: 48 µm Actual Value: 32 µm ID-No.: 14280 JFA Roller Blocks Additional measuring plates in various sizes – new and used – available in our shop! Gsdpfx Absihillj Tskf International shipping costs available on request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules and photovoltaic modules Testing of electrical and mechanical safety Support for product development, design, and quality control Detection of potential problems during the development phase Quality and safety inspection Endurance test stand Temperature control Mobile on castors Forklift entry pockets 400 VAC, 3-phase, 50 Amp Breaking capacity: 10,000 Amp Gkedpoh Rvh Sjfx Ab Tsf Year: 2012 Weight: 1,400 kg Dimensions (H x W x D): 2,900 x 1,700 x 1,900 mm More testing devices – new and used – available in our shop! International shipping rates on request!

Stanje: zelo dobro (rabljeno), Granite Surface Plate with Vibration Isolation Surface plate made of grey-black granite Ideal as a base for assembly, inspection, and laboratory applications All outer edges finely ground Corrosion-resistant threaded and locating holes Subframe with vibration isolation (membrane air spring isolators) Plate dimensions: 2000 x 1450 x 400 mm (W x D x H) Weight: approx. 4000 kg Additional surface plates in different sizes – both new and used – are available in our shop! Gksdpfx Abeh Ri Auj Tsf International shipping costs upon request!