Celotni žagi (stacionarne) nakup rabljenega (158)

Stanje: novo, Solid band saw for log diameters up to 130 cm. Soft starter included, expandable with extension sections. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height adjustments. Hfodovrvhvopfx Ah Dsn Equipped with telescopic lever log turner, log lifter, three telescopic angled stops with two extendable log clamps, powered log lifter for horizontal log feed, and coolant pump. Saw unit suspended on both sides for greater stability and improved precision. CE certified. Technical specifications: - Cutting length: 6.6 m - Max. log diameter: 1300 mm - Max. board width: 1000 mm - Max. saw blade stroke: 1080 mm - Max. frame clearance: 365 mm - Motor power at 100% duty cycle: - Main motor: 22 kW - Feed motor: 3 kW - Hydraulic unit: 7.5 kW - Lift motor: 0.75 kW - Saw blade dimensions: 6500 mm x 50–60 mm - Weight: 3600 kg Optional special equipment: - Extension section (each 4 m) - 30 kW motor - Pre-cutting device - Double-arm log lifter - Telescopic log turner - Chain log turner - Log clamp - Material return conveyor - Material chute - Sharpening machine - Setting gauge - Protective cover

Stanje: pripravljen za uporabo (rabljen), COMPLETE CLAW LOG SPLITTER 1400 mm column Hydraulic 4-jaw chuck carriage Hfjdpfowt Nytex Ah Don Fully equipped with automation Water-cooled sharpener included

Stanje: zelo dobro (rabljeno), Band sawmill consisting of: - Clamping carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for removal of cut timber (manufacturer: SPRINGER) - Elevated operator’s cabin - Rails - Control cabinets - Accessories Optional with complete sharpening room equipment: Hjdpfxjvtwzme Ah Dsfn - Sharpening machine Vollmer CAL 200 - Swaging machine Vollmer PMH - Side (levelling) machine Vollmer EMS Block Bandsaw EWD Esterer EBB1400 Vertical bandsaw for round timber Roller diameter: 1400 mm Roller width: 200 mm Blade width: 206 mm Max. blade thickness: 1.47 mm Max. blade speed: 55 m/s (drive pulleys for summer & winter included) Main motor: 55 kW The crown on the rollers was reground in 2009 Bandsaw Carriage EWD Esterer EW1000 Hydraulic clamping carriage Year of manufacture: 1991 4 clamping blocks with 3 log turners Max. clamping block opening: 1000 mm Max. hook opening: 930 mm Total length: 6000 mm Total width: 2450 mm Total height: 1750 mm Track gauge: 1300 mm The bandsaw mill was purchased used in 2004/2005, re-installed by Esterer, but was never put into full operation, as almost all cutting was done with the frame saw. Since 2004, the bandsaw has run for only 500 operating hours! Very good condition – immediately available – viewing and demonstration possible by appointment. Sharpening room equipment: 01. Sharpening machine Vollmer CAL 200 Year of manufacture: 2000 Tooth feed from the left CNC automatic machine for grinding rip and block bandsaw blades (straight grinding, wet grinding) Fully enclosed with extraction For CBN and corundum grinding wheels Includes 2 borazon grinding wheels, 10 mm 02. Swaging machine Vollmer PMH Automatic swaging machine for bandsaw blades Max. blade thickness: 3.5 mm 03. Side/levelling machine Vollmer EMS Levelling machine for swaged bandsaw blades, converted to self-drive in combination with CAL 200, incl. limit switch at the saw blade clamping! Further details: The sharpening machines were purchased used in 2007 and have been stored covered on pallets/wooden constructions in a dry, heated garage. Due to the bandsaw never having been put into full operation, the installation of the sharpening room equipment was repeatedly postponed and as such, the machines are in the same condition as delivered. All operating manuals, descriptions, and wiring diagrams are neatly stored in a box. In 2018 and 2023, the machines were cleaned outside to remove surface dust, lightly oiled with graphite spray, and stored back in the garage. Immediately available – fully functional – in very good condition Location: Austria, near St. Pölten

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rabljena, vendar popolnoma delujoča kompletna linija. Video prikazuje točno tisti stroj, ki ga prodajam. Nova cena se začne pri 337.605 USD brez nadgradenj. Za več informacij ali dodatne slike/posnetke me prosim kontaktirajte. Hodpfxjvn Ei Us Ah Dofn

Stanje: dober (rabljeno), Leto izdelave: 1998, Tračna žaga ARTIGLIO 1300 - kompletna linija Hjdpfx Ajw A Niysh Dsfn

Stanje: generalkompletno obnovljen (rabljeno), Kompletna rabljena tračna linija za prodajo. Prva faza žaganja vključuje obrezovalnik, druga faza pa profilirne stroje. Vključeni so vsi transporterji in komponente. Linija bo popolnoma mehansko obnovljena; elektro inštalacija je celovita, vendar se prodaja v obstoječem stanju. Za ceno in dodatne informacije prosimo pošljite povpraševanje. Hedpfewa Nrpsx Ah Dsfn

Stanje: kot nova (razstavni stroj), used band sawmill CTR520, demonstration unit at a special price, for logs up to 63 cm in diameter, manual cutting program, highest cutting accuracy, height adjustment via hand crank, equipped with a bimetal saw band suitable for all wood types, max. log diameter 600 (520) mm, max. board width 460 mm, rated motor output S1 4 kW, standard cutting length 3.6 m, saw band dimensions 3110 x 27 x 0.9 mm, cutting length extension section 2.25 m, weight 218 kg, CE certified, 3 kW S1, 218 kg Hjdpfx Ahovrvq Rj Djfn

Stanje: novo, Leto izdelave: 2024, WRAVOR Horizontal Bandsaws WRC 1050, 1150, 1225, 1250, 1550, 2000 Edgers, multi-blade saws, mechanization solutions, etc. We are your contact partner for Wravor in Germany. Hsdpfx Ajtpwgxjh Defn We are happy to offer you suitable machines.

Stanje: rabljeno, Complete sawmill, currently only for sale as a unit. Reservations for single unit purchase are possible at any time. Sawmill consists of: 01. Log Conveyor, 3-strand, by Mayrhofer with separator with feeder Total length: 8 meters Width: 3.5 meters 02. Fully hydraulic carriage, by Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Frame Saw Pini & Kay FN65 HH Pass-through width: 650 mm Drive motor: 33 kW with saw blades with mounting bracket with intermediate gear with riving knife with chip scraper conveyor 04. Frame saw roller conveyor with 3 extractors and steep conveyor Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table, 4-strand Length: 4.5 meters Hodpfxowptuys Ah Dsfn Width: 2 meters 06. Steep conveyor, 4-strand Conveying length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 0-line left Right-hand machine Drive motor: 22 kW with 2 under-table cross cut saws with hydraulic roller lift with hydraulic width adjustment with slat separator with extraction table/cross conveyor for slats with elevator for main product with conveyor belt with spiral roller conveyor with manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpening machine Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 141-8300, dolžina rezanja (maks.): 7.000 mm, širina rezila žage: 100 mm, leto zadnje generalne obnove: 2022, Zenz BN 110 S Saw incl. mechanization 22 kW drive motor 7 m cutting length 5 vertical supports 2 log turners (+ 2 mounts) Log lifter 4 level compensators with claws 1 log roller Hjdpfewhcwhex Ah Djfn 1 pre-cutter Water lubrication, 20 l tank PLC control Seat mounted on armrests Left: PLC – Right: Joystick Mechanization, year of manufacture 2022, consisting of: Hydraulic flap frame for removal at the saw with electrically driven roller conveyor Roller conveyor with hydraulic ejectors Small roller track, 4 m All electrical and hydraulic elements can be operated from the operator’s station. Zenz sharpening machine, type AHB No. S - 1012

Stanje: pripravljen za uporabo (rabljen), Prodaja se popolnoma delujoča žaga zaradi upokojitve. Vsa dokumentacija je urejena, široka baza dobaviteljev in vsa proizvodnja je prodana. Več informacij in cena zasebno. Samo za resne interesente. Hedpfxoxma Hue Ah Djfn

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Stump Grinder Hombak ESR 900/700/960 with Root Growth Reducer – Year of manufacture: 1993 Hsdot Hf T Hjpfx Ah Defn – Maximum log diameter: 1300 mm TECHNICAL SPECIFICATIONS: - Minimum log length: 2000 mm - 48 knives - Main motor: 45 kW - Hydraulic pump motor power: 11 kW - Milling head rotation motor: 5.5 kW - Shaft length (milling/cutting length): 980 mm - Log clamps - Machine dimensions (L/W/H): 550 / 250 / 340 cm - Weight: approx. 10 t

Stanje: kot nova (razstavni stroj), Demonstration unit Robust band sawmill for logs up to 71 cm in diameter, extendable indefinitely with optional extension sections. Features automatic feed with stepless speed control. Electric height adjustment conveniently regulated from the operator’s console. 3.8-inch touch LCD display for precise height setting. Saw head suspended on both sides for increased stability and enhanced precision. CE certified. Technical data: Hfedpfx Ahjvr I Rce Don - Maximum log diameter: 71 cm - Maximum board width: 67 cm - Motor output (S1): 5.5 kW - Cutting length, basic version: 2.1 m - Cutting length, extension section (optional): 3 m, 1 m - Weight: 550 kg

Stanje: kot nova (razstavni stroj), Blockbandsaw Hauslhof CTR800S, demonstration machine Serial no. 69/21/007 The machine is equipped with the following accessories: 2 x extension sections for log saw CTR800S, 3 m Ammeter for CTR Electrically adjustable saw band guide for CTR Watering pump with automatic activation for CTR Hydraulic saw band tensioning device Scoring unit Hfsdpjvr I Risfx Ah Don

Stanje: kot nova (razstavni stroj), Demonstration machine. Extra strong, robust, and durable horizontal band saw for log diameters up to 1000 mm. Softstarter included. Can be extended with extension sections. Automatic feed with variable speed control. Electric height adjustment from the operator panel. Equipped with a telescopic log turner, log lifter, and powered horizontal log feed system. Hydraulic angle stops. Two log clamping tools. Hydraulic saw band tensioning. Electrically adjustable saw blade guide. CE certified. Technical Specifications: - Maximum log diameter: 1000 mm - Maximum board (slab) width: 920 mm - Maximum saw blade lift: 900 mm - Minimum cut height: 30 mm - Maximum frame clearance: 365 mm - Cutting length of base section: 7.5 m - Extension section length: 3 m Hodpfjvrvq Dsx Ah Dofn - Saw blade drive output at 100% duty cycle: 22 kW - Feed motor at 100% duty cycle: 3 kW - Lift motor: 0.55 kW - Hydraulic unit motor: 5.5 kW - Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm - Weight of base version: 2800 kg This machine is equipped with the following accessories: - CTR-1000H60-Ver3 - CTR-VOR-1300H - CTR-AMP - CTR950H-KSD - CTR950H-DS - CTR950H-MR - CTR1000H40-ZUB

Stanje: novo, The new robust bandsaw mill from Holzprofi is designed for log diameters up to 75 cm and offers numerous options for precise cutting of your timber and logs. It features high cutting accuracy, a galvanized base, and a powder-coated upper section. Suitable for all types of wood, timber, or reclaimed lumber. Trailer homologated for road use, with extension sections that allow unlimited lengthening. Extremely stable thanks to its solid welded frame. CE certified. The original—no imitation! Technical Data: - Max. log diameter: 750 mm - Max. board width: 620 mm - Motor output S6: 7 kW (5.5 kW S1) - Cutting length: 4.2 m (unlimited extendable) - Min. cutting length without aids: 0.75 m - Bandsaw blade length: 4140 mm - Bandsaw blade width: up to 35 mm - Band wheel diameter: 500 mm - Dimensions (W x H x L): 1980 x 1670 (1910) x 5300 mm - Blade speed: 13 m/sec - Weight: 445 kg Standard Equipment: - Simple height adjustment - Special device for setting precise wood thickness - 2 base sections - 3 units of 90° angle stops - 3 log clamp devices - Band tension indicator - Bi-metal bandsaw blade suitable for all wood types Optional Equipment: - Extension section with angle stop and log clamp device (adds 2.25 m cutting length per section) - Electric variable feed drive with speed display - Electric height adjustment with cut thickness calculator and digital height display - Loading system with loading ramp - 7.5 kW motor output S1 (9.5 kW S6) - Hydraulic band tension indicator Hodevrviaspfx Ah Dsfn - Watering valve - Protective cover - Sharpening machine - Setting tool - Log turning lever

Stanje: rabljeno, VAT deductible Block band saw CTR800H, year 2022, very good condition, 830 mm max. log diameter, 11 kW motor power, 7.5 m cutting length, 4920 mm band length, 1600 kg. The machine was used temporarily by a customer to bridge the long delivery time for a new machine. Hfedpfxovrvkqs Ah Dsn Including the following accessories: 3 m extension section, double arm log loader, additional log loader, chain log turner, hydraulic rotatable log lifter, hydraulic log lifter with drive, clamping device, outfeed conveyor for cut material, hydraulic material chute, lever log turner, LG automatic, irrigation pump with automatic start, pre-cutting device, hydraulic blade tensioning device, electrically adjustable saw band guide, ammeter, free control blocks, extended cables for an additional 3 m extension, 10 pcs. X-Cut saw bands. Price changes, errors, and typographical mistakes reserved.

Stanje: rabljeno, Double edger Woodmizer EG100, year 2019, standard equipment, 8 kW, 2 saw blades, 512 kg Price subject to change. Errors, misprints, and typographical errors excepted. Hfedpovrvk Refx Ah Den

Stanje: novo, The new solid block band saw from Holzprofi is designed for log diameters up to 75 cm and offers numerous options for precise cutting of your wood and logs. High cutting accuracy, galvanized lower section, powder-coated upper section. Suitable for all types of wood, logs, or reclaimed timber. Can be extended indefinitely with extension sections. Very stable due to the solid welded frame. CE certified. The original! Not an imitation! Technical data: Maximum log diameter: 750 mm Maximum board width: 620 mm Motor output S6: 7 kW (5.5 kW S1) Cutting length: 3.45 m (unlimited with extensions) Minimum cutting length (without accessories): 0.75 m Saw blade length: 4140 mm Saw blade width: up to 35 mm Hfjdpevrvh Nsfx Ah Den Band wheel diameter: 500 mm Dimensions (W x H x L): 1980 x 1670 (1910) x 5300 mm Blade speed: 13 m/s Weight: 445 kg Standard equipment: - Simple height adjustment - Special device for precise wood thickness adjustment - 2 base sections - 3 x 90° angle stops - 3 log clamp devices - Blade tension indicator - Bimetal saw blade for all wood types Optional equipment - Extension section with angle stop and log clamp device (extends cutting length by 2.25 m per section) - 7.5 kW motor output S1 (9.5 kW S6) - Hydraulic blade tension indicator - Watering valve - Scoring unit - Tarpaulin cover - Sharpening machine - Tooth setting device - Log turning lever

Stanje: rabljeno, Block bandsaw Pilous CTR750E, year 2024, in very good condition, stepless electric feed, 5.5 kW Hjdpfx Ajvrvlbeh Dsfn Subject to price changes. Errors, misprints, and typographical mistakes excepted.

Stanje: kot nova (razstavni stroj), Demonstration machine Hfedpfx Aevrvqqjh Dsn The new professional bandsaw blade grinding machine OR71 impresses with its numerous precise adjustment options for grinding a wide variety of tooth profiles on block bandsaw blades. Especially noteworthy is the ability to grind different tooth gullets for cutting specific types of wood. The machine’s precision is also significant. Includes automatic stop via magnet. Speed control via frequency converter. Supplied with halogen lamp and coolant system. Technical data: Bandsaw blade width: 15 - 70 mm Max. bandsaw blade length: 6800 mm Max. bandsaw blade thickness: 2 mm Tooth pitch: 8 - 35 mm Feed motor power S1: 0.18 kW Grinding motor power S1: 0.25 kW Weight: 66 kg Subject to price changes. Errors and misprints excepted.

Stanje: novo, The new block band saw from Hauslhof is suitable for logs with a diameter of up to 65 cm and offers excellent cutting accuracy. Its simple operation makes it ideal for forest owners who want to start sawing their own timber, regardless of wood type. Thanks to extension sections, it can be expanded without limit and is easy to assemble and disassemble. Manual feed and cutting height adjustment result in minimal maintenance requirements. CE certified. Technical Data: Max. log diameter: 650 mm Max. board width: 475 mm Motor output S6: 6.5 kW (5.5 kW S1) 400 V Cutting length basic version: 2950 mm Saw band length: 3658 mm Saw band width: up to 35 mm Band speed: 20 m/sec Cutting length per extension section (optional): 1.95 m Weight: 335 kg Hfodpfxjvru Ubo Ah Don Optional Equipment: - Extension section increases cutting length by 1.95 m each

Stanje: rabljeno, Automatic grinder OR71F incl. base frame, year of manufacture 2022, 250 W, 66 kg Hfsdevrvkwspfx Ah Djn Price subject to change, errors, typographical and printing mistakes excepted.

Stanje: rabljeno, številka stroja/vozila: G-BBS123462bR, Block band saw Jonsored, year of manufacture approx. 2000, good condition, standard equipment 550 mm, 5.5 kW, 400 V, 5500 mm table length, 200 kg Hodpsvw Ecajfx Ah Djfn Subject to price changes; errors, misprints and typographical errors excepted.

Stanje: novo, The new, state-of-the-art and robust band sawmill from Holzprofi is designed for log diameters up to 75 cm and offers numerous options for precise cutting of your timber and logs. Maximum cutting accuracy is ensured by the integrated cutting thickness calculator. The base is galvanized and the top section is powder-coated; includes a pre-cutting device! Suitable for all types of wood, timber logs, or reclaimed wood. Unlimited extension possible with additional extension sections. Highly stable thanks to the solid welded frame. CE certified. The original – not an imitation! Technical Specifications: Max. log diameter: 750 mm Max. board width: 620 mm Motor output S6: 7 kW (5.5 kW S1) Feed motor power: 0.37 kW Max. feed speed: 17 m/min Cutting length: 3.45 m (infinitely extendable) Min. cutting length without accessories: 0.75 m Saw blade length: 4140 mm Saw blade width: up to 35 mm Band wheel diameter: 500 mm Dimensions (W x H x L): 1980 x 1670 (1910) x 5300 mm Blade speed: 13 m/sec Weight: 460 kg Hfedpfxevrvigs Ah Dsn Standard Equipment: - Electric feed, stepless adjustment - Electronic speed display - Electric height adjustment with electronic height indicator - Cutting thickness calculator with automatic feed to the preset height - Special device for fine adjustment of timber thickness - 2 base sections - 3 x 90° angle stops - 3 log clamping devices - Blade tension display - Bi-metal saw blade for all wood types - Hydraulic blade tension gauge - Watering valve Optional Equipment: - Extension section with angle stop and log clamping device (extends cutting length by 2.25 m per section) - 7.5 kW motor - Cover tarp - Sharpening machine - Setting tool - Log turning lever