Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 119 h, Funkcionalnost: popolnoma funkcionalen, Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24-V electric control – additional electric pump for operating the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Pgjdpfxsxx Sbns Adyjg Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Drive unit 260 kW – EV 3-axle drawbar chassis unit Shredding system size L – 20 teeth Additional hydraulic connections 35 – 80 l/min Hydrostatic drive 350 mm hopper extension, watering device on both sides Rear conveyor 7 m Overband magnet – neodymium Frame for overband magnet 7 m Delivery date to be agreed

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 3.300 h, Funkcionalnost: popolnoma funkcionalen, Base Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, approved for road use up to 80 km/h Braking system incl. ABS and lighting compliant with EC Directive Tyres: 385/65 R22.5 Permissible total weight: 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection, 20 l/min Load-dependent control of feed material including automatic reversing scraper floor Separate drives for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 litres Feed roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally arranged lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is stopped 24V electrical control system Separate control box at the rear of the machine Hydraulically foldable Multimesh fine shredding basket (mesh size from 30 - 280 mm, gradation available on request) incl. one-piece rear flap Rear conveyor: length 7,500 mm, width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. antimagnetic centre section Underscreen conveyor: length 3,800 mm, width 1,400 mm Moistening system for external water connection Scraper floor with 71 slats Wear protection in the drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL 2011 deep orange Optional Equipment: Hydrostatic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication system Engine compartment protection plate Pgodpfoxx Tigox Adyjg Lighting package: Engine compartment and rear conveyor Watering system Delivery date by arrangement Available from 06/2026

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 4.826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connections: 30 l/min and 70 l/min Roller drive via planetary gearbox 380 kW – VARIO – Load-sensing system Fuel tank: 950 liters Discharge conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally positioned wear strips 24 V electric control system Additional electric pump for operating the following functions when the engine is off: Raise/lower/fold discharge conveyor, open/close comb flap, open/close comb, lift/lower optional permanent magnet belt, lift/lower optional folding hopper Complete radio remote control Large side GRP maintenance doors Easy-access engine compartment with LED lighting Hydraulically reversible fan Loading protection on both sides Fire extinguisher Maintenance ladder Pjdpfjvnmldox Adyjgg Toolbox Audible start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special equipment: 500 mm track undercarriage unit Track undercarriage 500 mm flat Shredding system Size "L" – VARIOMAT Size "L" – "Limiter" (20 pieces) Discharge conveyor: 7 m length, 1,200 mm wide LED lighting package for engine compartment and rear Watering system with hopper extension H = 300 mm Frame for overband magnet 2 t permanent overband magnet

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24-V electrical control – with additional electric pump for operating the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: 310 kW powertrain – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connection 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, watering left Rear conveyor 7 m Overband magnet neodymium Frame for 7 m overband magnet Podpjxx N T Iefx Adyegg Central lubrication Special paint finish in RAL Delivery date by arrangement

Stanje: dober (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.100 h, Funkcionalnost: popolnoma funkcionalen, Wyposażenie: Pakiet podstawowy Inventhor Type 6 - System load-sensing - Zbiornik paliwa 500 litrów - Taśma podłużna: długość taśmy 2.900 mm, szerokość taśmy 800 mm - Centralnie rozmieszczone listwy smarujące - Sterowanie elektryczne 24 V – dodatkowa pompa elektryczna do obsługi następujących funkcji przy wyłączonym silniku: "Podnoszenie/opuszczanie/zaginanie taśmy tylnej, otwieranie/zamykanie klapy grzebieniowej, otwieranie/zamykanie grzebienia, podnoszenie/opuszczanie kosza składanego" - Pełna radiowa zdalna obsługa - Duże boczne drzwi serwisowe z tworzywa GFK - Przestronna komora silnika ułatwiająca serwisowanie - Pakiet oświetlenia LED: komora silnika i tył - Hydraulicznie odwracalny wentylator chłodzący - Trójstronna ochrona załadunku - Kosz składany - Gaśnica - Drabina serwisowa - Skrzynka narzędziowa - Dźwiękowy sygnał ostrzegawczy podczas rozruchu - System telematyczny Doppstadt Pgedpfx Adownfwqjyjg - Lakier: RAL2011 głęboki pomarańcz Wyposażenie dodatkowe: - Układ napędowy 310 kW – napęd elektryczny - Podwozie z dyszlem, 3-osiowe - System rozdrabniający Size L 600/4–30 Z - Dodatkowe złącza hydrauliczne 35–80 l/min - Napęd hydrauliczny - Taśma wyładowcza tylna 4,9 m - Separator nadtaśmowy neodymowy - Rama do separatora nadtaśmowego

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 881 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor goseničar Gosenično podvozje z 2 hitrostmi vožnje Gosenice podvozja 400 mm, 3-rebraste Dodatni hidravlični priključek 70 l/min 24V električno krmiljenje Velik daljinski upravljalnik, komplet Vzdrževalno prijazen motornik s LED svetilko Zložljivi lijak s potnim senzorjem in samodejnim upravljanjem Hidravlično reverzibilen ventilator Akustično opozorilo ob zagonu Rezervoar za gorivo 300 litrov Barva: RAL 2011 temno oranžna Dodatna oprema: Motor Cat C7.1, 205 kW Zadnji trak 6,9 m Okvir za nadpasni magnet Nadpasni magnet Hitromenjalni sistem valja Hitromenjalni sistem valja Namakanje Podpfxjvnmmze Adyogg LED delovna razsvetljava Dodatna električna črpalka za upravljanje pri zaustavljenem motorju Gasilski aparat GN 9 A-3 DIN EN 3

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 1.150 h, Funkcionalnost: popolnoma funkcionalen, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electrical control – additional electric pump for actuating the following functions when the engine is stopped: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided loading protection Pgjdpfx Adsxx N Dgjysg Folding hopper Fire extinguisher Maintenance ladder Toolbox Audible start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: 260 kW drive train – EV 2-axle semi-trailer chassis unit Size L shredding system – 20 teeth Size L limiter Auxiliary hydraulic connection 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, watering system both sides Size L hopper wedge with brush NM 7 m rear conveyor Overbelt magnet neodymium Frame for 7 m overbelt magnet Delivery date by arrangement

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 200 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor z verigo - Podvozje na gosenicah z dvema hitrostma vožnje - Gosenica 400 mm, 3-rebrasta - Dodatni hidravlični priključek 70 l/min - 24-V električno upravljanje - Velika popolna radijska daljinska upravljalna enota - Motorni prostor prijazen za vzdrževanje z LED lučjo - Preklopni lijak s senzorjem poti in avtomatskim upravljanjem - Hidravlično reverzibilno ventilatorsko kolo - Akustično opozorilo ob zagonu - Rezervoar za gorivo 300 litrov - Barva: RAL 2011 temno oranžna Dodatna oprema: - Gumijaste blazinice za hitro menjavo - Motor Cat C7.1, 205 kW - Zadnji trak 6,9 m Pgodpevnq Trjfx Adysg - Sistem drobljenja velikosti L (8 zob) - Okvir za nadtrakovni magnet - Nadtrakovni magnet - Sistem hitre menjave valja na valju - Sistem hitre menjave valja na stroju - Namakalni sistem - LED delovna razsvetljava - Dodatna električna črpalka za upravljanje ob zaustavitvi motorja

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 6.031 h, Funkcionalnost: popolnoma funkcionalen, Basic package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye, incl. slip-on shoe Hydraulically adjustable support legs at the front on both sides and at the rear right Splash guards (internal and side-mounted fenders) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, complies with emission standard EUROMOT TIER IV Final Hydraulically reversible fan on water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Filling hopper with 5.0 m³ capacity Stone grid preparation Pgsdpfx Aoxx R Rhodyjg Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switch on side and rear conveyor Load-dependent regulated material feed from feed floor to drum screen Continuously adjustable drum screen speed from 0 - 20 rpm Continuously adjustable hopper conveyor speed from 0 - 0.17 m/s Control panel at the rear of the machine with the following functions: emergency stop switch, fold/unfold rear conveyor, fold/unfold side conveyor, kink side conveyor and load control +/-, enable/disable automatic mode From the operator's console: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush elements and spring tines Centrally arranged lubrication strips 24 V electrical control Rear underride guard Front (reinforced) and rear lateral underrun protection on both sides Hydraulic quick coupling between the rear conveyor and the machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Base variant without drum screen Optional equipment: Flow divider on rear conveyor Delivery date by arrangement

Leto izdelave: 2016, Stanje: potreben popravila (rabljeno), Funkcionalnost: nepreverjeno, HS 800 basic package Spiral shaft screening deck AA209-150 Pgjdpfx Aevm Uqrsdysg Special paintwork: green

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: nepreverjeno, Basic package Selector 800 Podpfx Aevm Upnodyogg Sub-belt BB 1350 mm AA 6.4 m -profiled belt- SPIRAL SHAFT SCREEN DECK AA254-150 - 16 shafts

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 590 h, Funkcionalnost: nepreverjeno, Oprema: Osnovni paket Methor veriga Gosenice podvozje z dvema hitrostma vožnje Podvozna veriga 400 mm 3-letveni Dodatni hidravlični priključek 70 l/min 24-V električni nadzor Velika popolna radijska daljinska upravljalnik Vzdrževalno prijazen motornim prostor z LED osvetlitvijo Zložljiv lijak s senzorjem položaja in avtomatskim nadzorom Hidravlično reverzibilno ventilatorsko kolo Akustično opozorilo ob zagonu Rezervoar za gorivo 300 litrov Barva: RAL 2011 temno oranžna Dodatna oprema: Gumijaste blazinice za hitro menjavo Podpfx Adevnq Rkeyegg Motor Cat C7.1, 205 kW Zadnji trak 6,9 m Okvir za nadtrakovni magnet Nadtrakovni magnet Sistem za hitro menjavo valjev na valju Sistem za hitro menjavo valjev na stroju Namakanje LED delovna osvetlitev Dodatna električna črpalka za obratovanje ob mirovanju motorja Gasilni aparat GN 9 A-3 DIN EN 3

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD baler Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Podpera A E Usfx Adyogg Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Naprava demontirana iz proizvodne linije, delovala je do konca. Redno vzdrževana, pripravljena za uporabo. Pedpfxjya Uube Adyogg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, vhodna napetost: 400 V, teža bale: 550 kg, skupna masa: 2.500 kg, Used HSM V-Press 1160 Plus vertical baler from 2016. The machine is regularly serviced by an authorized service center. The baler is fully functional and in excellent technical and mechanical condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Feed opening width x height: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Machine width x depth x height: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pgjdpfsybcahex Adyjg Press material: film, mixed paper, cardboard, trimmings from cutting machines Freight costs depend on weight, volume, and especially on distance. When requesting a quote, the following information is relevant: delivery address (postal code and city name); due to further required details, we ask you to contact us by phone to clarify transport costs and additional delivery modalities. Our contact details can be found under the seller’s legal information. Payment in cash upon collection on site is possible. We sell and export worldwide. Due to our large storage capacity, we can supply larger quantities flexibly and promptly. Please contact us prior to purchase. We issue intra-community invoices – VAT excluded. Opening hours: Mon-Fri: 8:00–16:00 Sat: closed

Stanje: rabljeno, Leto izdelave: 2018, premer rotorja: 368 mm, širina rotorja: 1.500 mm, No. 10027 Single-Shaft Shredder / Shredder AMIS / WEIMA WT 15 Used, year of manufacture 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be inspected and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening: 1500 x 1160 mm (LxW) Rotor width: 1500 mm Rotor diameter: 368 mm Rotor speed: approx. 90 rpm Motor power: 90 kW Throughput: approx. 5 tons per hour (depending on material) Total plant output: 99 kW Current consumption: 210 A Voltage: 400 V / 50 Hz PLC control: Siemens SIMATIC Built-in screen with hole diameter 20 mm Replacement screen with hole diameter 50 mm The high-performance shredder of the WT series is ideally suited for processing a wide range of plastics – especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams, as well as all loose and non-bulky residual materials. The WING-RAM swing arm ensures reliable feeding even of contaminated or moist material. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of manufacture 2018 / 1.5 kW Incl. AMIS magnetic separator Installation dimensions approx. 9000 x 3500 x 3950 mm (LxWxH) Pgodpfx Aoxwdiuodyeg Transport dimensions (single-shaft shredder) approx. 3000 x 2700 x 3200 mm (LxWxH) Weight: approx. 12,500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, transport and assembly Dismantling, transport and loading by us optionally available Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale is as-is Technical data, condition description, year of manufacture and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 2.055 h, 2015 | Dücker HM 200 Holzhäcksler | Schredder | 2055 radnih sati 📍 Lokacija: Nemačka 🚛 Dostava dostupna na vašu lokaciju – Koristite naš kalkulator za procenu troškova transporta! 💰 Kupite odmah za 14.400 EUR ili pošaljite ponudu. Plaćanje prilikom isporuke moguće uz dodatnu naknadu (uz prethodno odobrenje)* 👷‍♂️ Pregledano od strane nezavisnog stručnjaka 14 tačaka inspekcije, 12 odobreno ✅ 0 nesavršenih ℹ️ 2 zabeležene primedbe ⚠️ 📌 Komentar inspektora: Pgodpfx Aeyac Upedyeg 📄 Želite da vidite kompletnu inspekciju, dodatne fotografije ili video snimak? Savet: Referenca "39537 Equippo" se često koristi za detaljnije pretrage na internetu. 💡 Zašto su ova mašina i naša usluga posebni: ✔ Temeljna inspekcija od strane profesionalaca ✔ Dostava do gradilišta dostupna ✔ Garancija povrata novca ✔ Sigurne i fleksibilne opcije plaćanja 🔄 Razmišljate o drugim opcijama opreme? Naša platforma nudi korisne alate i resurse za sve vlasnike i operatere opreme – lako dostupno na jednom mestu.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 2011-23527, vhodna napetost: 400 V, Tukaj prodajamo naš drobilnik, ki je bil redno vzdrževan; pred kratkim je bil obnovljen polž za iztiskanje materiala. Videoposnetki delovanja stroja so na voljo na zahtevo. Pgsdpfoydil Aex Adyjg Zaslon na dotik ne deluje povsem zanesljivo, vendar je uporaben in delovanja stroja to ne ovira.

Stanje: rabljeno, PODPOSTAJA ZA ODSAVANJE PRAHU IZ PROCESA SESTAVLJENA IZ: - Centrifugalni ventilator za odsesavanje prahu Pedpex N T E Sjfx Adyegg - 132 rokavov premer 120 mm, višina 3000 mm s koši - Zmogljivost odsesavanja 20.000 m³/h - Sistem izmeta materiala z zvezdasto loputo - Sistem čiščenja rokavov s pihalniki, ki jih krmili ciklični varčevalec - Motovibrator na izpustnem lijaku - CAM Logic na izpustnem lijaku za signalizacijo ravni zamašitve - Električna krmilna omara - Centrifugalni ventilator mod. EUC 801, 30 kW * i14

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), Leto izdelave: 1997, Circular vibrating screen Screen surface: 6,000 x 2,000 mm Motor base with drive components Lower deck with piping and spray system incl. polyurethane screen panels for both screen decks Pgjdpfoulu Rfox Adyeg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 37 kW (50,31 KM), Infeed: approx. 1,000 x 700 mm Rotor diameter x width: 600 x 1,000 mm Maximum feed size: 100 mm Pgedpeu Dhg Ejfx Adyjg Electric drive Semi-mobile on steel skid frame with infeed and discharge hopper

Leto izdelave: 2005, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Impact Crusher HARTL PC204N Feed opening: 1,260 x 1,060 mm Rotor diameter: 1,300 mm New blow bars Feed hopper approx. 7 cbm Vibrating feeder trough Active 2-deck screen Side and main discharge belts Magnet separator belt Podpfxenxi Dns Adysgg CAT C10 diesel engine (291 kW) Weight: approx. 50 t.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Infeed opening: 620 x 350 mm Rotor diameter x width: 1,060 x 610 mm Hard rock intake: up to 180 mm Limestone intake: up to 300 mm Complete with electric drive, discharge conveyor, and steel construction Psdpfxelgzrho Adysgg

Stanje: dober (rabljeno), Leto izdelave: 1995, Shredding via 3 HARDOX spirals Pgjdpfx Ajl I Dx Nodyjg Diameter x length: approx. 500 x 1,700 mm Feed opening: approx. 1,100 x 1,700 mm Mounted on steel frame New filling hopper 8 m³ New control cabinet Including 7 unused spare augers

Leto izdelave: 2002, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Skladiščni ali dozirni in dovajalni zabojnik D x Š x V: pribl. 12,1 x 3,0 x 3,25 m Prostornina: 55 m³ Pretok: pribl. 150 m³/h 6 dozirnih/izpraznjevalnih polžev – gnani v parih, vsak z 11 kW Pgodpfellvpzex Adysg Teža: pribl. 15 t Prej deloval v napravah za nadomestna goriva (EBS).