Členkasta delovna ploščad

Manitou 280 TJ

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 385.540 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Kdedpfx Afox E Nh Ij Teg Lastna teža: 16.500 kg Dvižni steber: pregibna roka Dvižna zmogljivost: 350 kg Za več informacij kontaktirajte prodajo KEY-TEC.

Stanje: rabljeno, Leto izdelave: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete Dewatering System in Container Year of Manufacture: 2018 Sludge Throughput: approx. 0-40 m³/h Solids Capacity: max. 1.2 t DS/h Equipment: Front double door, side entrance door, fan heater, lighting, power sockets, etc. Rotor: max. speed 3650 min⁻¹ Drum Diameter: 470 mm System: Containerised plant with swap body system for acceptance of subsequent plant components. Ready for operation, fully piped and wired as a functional unit. Container Design: Frame construction, clad with sandwich panels, equipped for transport with swap chassis systems. Accessories: FHM PolyMix 4000SP preparation station, measuring equipment, control system Feed Pump: Seepex BN 52-6LS Discharge Conveyor: Double trough screw conveyor SS D320 Dimensions: L 7820 mm x W 2500 mm x H 3880 mm Unladen Weight: 14,500 kg Operating Weight: 15,000 kg Voltage: 400V Current Draw: 142 A Max. Power Consumption: 70 kW Kdodpfx Afju R Icme Teg Fuse Protection: 250 A Frequency: 50 Hz Sludge Inlet: DN 100 Centrate Outlet: DN 200 Solids Discharge: Screw conveyor Further information: see photos

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 3.880 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolo Dvižni steber: pregibna roka Dvižna zmogljivost: 350 kg Kodpjya Trfsfx Af Tjdg Za več informacij se obrnite na prodajo KEY-TEC.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 3.745 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: Kolo Drogu: Pregibna roka Kjdpfx Asya Tq Uof Tsdg Dvižna zmogljivost: 350 kg Delovna višina: 2.770 cm Največji vodoravni doseg: 2.140 m Za dodatne informacije se obrnite na prodajo KEY-TEC.

Stanje: zelo dobro (rabljeno), vrsta goriva: dizel, barva: modra, dvižna višina: 64.000 mm, tip droga: teleskopski, Leto izdelave: 2008, obratovalne ure: 6.034 h, General Information Year of manufacture: 2008 Intended use: Construction Technical Information Number of cylinders: 6 Drive: Wheeled Unladen weight: 48,485 kg Functional Mast: Telescopic (5 sections) Mast length: 64 m Lifting capacity: 70,000 kg Superstructure brand: TADANO GR-700E-1-00211 ROUGH TERRAIN CRANE CE marking: yes Condition Kdodpfx Afowudgqs Teg Technical condition: very good Visual condition: very good Financial Information Price: On request

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 3.755 h, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Dvižni steber: pregibna roka Dvižna zmogljivost: 350 kg Delovna višina: 2.770 cm Maks. vodoravni doseg: 2.140 m Za več informacij kontaktirajte KEY-TEC Sales. Kodpfxeya Tq Is Af Tjdg

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 2.730 h, nosilnost: 240 kg, tip droga: teleskopski, vrsta goriva: dizel, Leto izdelave: 2019 Delovna višina: 2.775 cm Kdsdpsxb Ay Tjfx Af Tjg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, najv. debelina jeklene pločevine: 5 mm, Hydraulic Swivel Bending Machine Manufacturer: HOCHSTRATE Model: 3000/5 Year of manufacture: 1998 Technical Specifications Manufacturer: HOCHSTRATE Model: 3000 x 5 Year of manufacture: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm²) Kjdovrxnxspfx Af Tjdg Motor power: 7.5 kW Space requirement: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment • PLC control • 30 mm bending rail All information is provided without guarantee. A demonstration is possible at any time in our showroom.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 2.359 h, moč: 34,1 kW (46,36 KM), nosilnost: 240 kg, tip droga: teleskopski, dvižna višina: 27.750 mm, dvižna moč: 240 kg/m, dolžina platforme: 2.300 mm, širina platforme: 900 mm, skupna masa: 16.550 kg, transportna dolžina: 11.360 mm, transportna širina: 2.480 mm, transportna višina: 2.750 mm, vrsta goriva: dizel, poraba goriva na uro: 10 l/h, kapaciteta rezervoarja za gorivo: 72 l, velikost pnevmatike: 20" foam-filled terreinbanden, stanje pnevmatik: 85 odstotek, medosna razdalja: 2.800 mm, odmik od tal: 410 mm, barva: modra, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, zapora diferenciala, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 2,359 hrs Working height: 27.75 m Max. horizontal outreach: 21.45 m Platform capacity: 240 kg (indoor: 350 kg) Platform dimensions (L × W): 2,300 × 900 mm Upper structure rotation: 360° continuous Platform rotation: 90° / 90° Boom type: Telescopic boom lift Jib: Yes (articulating jib: +56.8° / –62°) Drive: Diesel All-wheel drive: Yes Tyres: Foam-filled off-road tyres Stabilisers: No Engine manufacturer: Kubota V2403-M Emission standard: Stage 3A Weight: 16,550 kg CE certification: Yes === HIGHLIGHTS === Carefully sourced from reliable, traceable sources Includes CE certification and complete documentation Immediately ready for use and transport Comprehensive technical documentation available === CONDITION === Excellent condition – fully inspected, serviced and tested by certified technicians. Inspection available on request. === LOCATION & DELIVERY === Location: Sittard, Netherlands Worldwide delivery available Price: €65,000 (EXW / plus VAT) Reliable machine from first ownership with full service history and professional technical support. All machines are inspected, CE-certified and immediately ready for operation. Spare parts and technical support available on request. === DELIVERY === Kjdpfxexxa E Ij Af Tsdg Crane loading available on request. Flexible worldwide shipping options tailored to your logistical requirements. Transport professionally handled by the Collé Rental & Sales logistics team.

Stanje: rabljeno, Leto izdelave: 2025, skupna dolžina: 11.350 mm, - Working height: 27.73 m - Platform height: 25.73 m - Max. outreach: 21.45 m - Vertical articulating jib (up / down): +56.80° / -62° - Platform capacity / maximum basket load: 240 kg / 350 kg - Upper structure rotation: 360° - Platform rotation (right / left): 90° / 90° - Permitted number of persons (indoor / outdoor): 3 / 2 - Counterweight offset (upper structure at 90°): 1.43 m - Counterweight dimension / outreach: 1.45 m - Outer turning radius: 4.35 m - Travel speed – transport mode: 4.50 km/h - Travel speed – work mode: 0.80 km/h - Gradeability: 35% - Permissible inclination in work mode: 4° - Tyres: Solid rubber, vulcanised - Drive wheels (front / rear): 2 / 2 - Steering wheels (front / rear): 2 / 2 - Braked wheels / wheels: 2 / 2 - Manufacturer / engine model: Yanmar - 4TNV88C - Engine emission standard: Stage V - Rated power internal combustion engine / output: 46 Hp / 34.30 kW - Ground pressure: 21.30 dan/cm² - Hydraulic flow rate – hydraulic pressure: 400 bar - Hydraulic tank capacity: 94 l - Fuel tank capacity: 76 l - Ambient noise (LwA): < 106 dB - Hand/arm vibration exposure: < 0.50 m/s² Kdsdpfx Ajxpx I Njf Tog

Stanje: pripravljen za uporabo (rabljen), najv. debelina jeklene pločevine: 10 mm, zadnji prislon: 1.000 mm, moč: 21 kW (28,55 KM), skupna dolžina: 4.330 mm, skupna širina: 2.200 mm, skupna višina: 2.110 mm, lastna masa: 10.000 kg, dolžina obdelovanca (maks.): 3.100 mm, CNC Siemens, zadnji naslon in nastavitev rezalnega kota; 2 sprednji podpori dolžine 3 metre; ročna nastavitev reže rezila; zadnja zaščita za vstop. Udari/min: 9 > 40 udarcev/min Nastavljiva rezalna naprava: 0,1 > 1,5 mm Zadnji naslon: 1000 mm Siemens Nastavljiv rezalni kot: 0,5° > 2,5° Potrebni tok: 380V Kdsdpfxov Taias Af Tjg Število držal za pločevino: 17x

Stanje: rabljeno, Leto izdelave: 2025, skupna dolžina: 11.350 mm, - Working height: 27.73 m - Platform height: 25.73 m - Max. outreach: 21.45 m - Vertical articulating jib (up / down): +56.80° / -62° - Platform capacity / maximum basket load: 240 kg / 350 kg - Upper structure rotation: 360° - Platform rotation (right / left): 90° / 90° - Permitted number of persons (indoor / outdoor): 3 / 2 - Counterweight offset (upper structure at 90°): 1.43 m - Counterweight dimension / outreach: 1.45 m - Outer turning radius: 4.35 m Kdjdpfexpi Rzex Af Tog - Travel speed – transport mode: 4.50 km/h - Travel speed – work mode: 0.80 km/h - Gradeability: 35% - Permissible inclination in work mode: 4° - Tyres: Solid rubber, vulcanised - Drive wheels (front / rear): 2 / 2 - Steering wheels (front / rear): 2 / 2 - Braked wheels / wheels: 2 / 2 - Manufacturer / engine model: Yanmar - 4TNV88C - Engine emission standard: Stage V - Rated power internal combustion engine / output: 46 Hp / 34.30 kW - Ground pressure: 21.30 dan/cm² - Hydraulic flow rate – hydraulic pressure: 400 bar - Hydraulic tank capacity: 94 l - Fuel tank capacity: 76 l - Ambient noise (LwA): < 106 dB - Hand/arm vibration exposure: < 0.50 m/s²

Stanje: dober (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 3355, nosilnost: 320 kg, tip droga: teleskopski, skupna dolžina: 11.300 mm, skupna širina: 2.460 mm, obratovalna teža: 16.650 kg, Manitou TJ280 von Uniktruck Kdjdpevnft Tefx Af Teg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Kjdpjuwlzyofx Af Tsdg Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years included on all essential components of the blasting system. Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 2.895 h, številka stroja/vozila: HR12674, moč: 33 kW (44,87 KM), nosilnost: 350 kg, lastna masa: 16.500 kg, gradbena višina: 2.750 mm, vrsta goriva: dizel, skupna dolžina: 11.350 mm, vrsta pogona: Diesel, gradbena širina: 2.430 mm, delovna višina: 27.750 mm, Telescopic Work Platform Kdsdpfx Afswlw Dds Tsg Chassis Number: HR12674 Condition: Ready for operation and fully functional Technical Condition: Standard Front Tires Condition: 40 - 60% Rear Tires Condition: 40 - 60% Description: Additional equipment available upon request CE Certificate,