Motorne napravne valjarice za lim, debljina lima 6,1-14 mm nakup rabljenega (139)

Stanje: novo, Sheet width: 2100 mm Sheet thickness: 8.0 mm steel Bending capacity: 6.0 mm steel Crjdpfx Asxab E Ejfwoi Top roll diameter: 190 mm Side roll diameter: 150 mm Lower roll diameter: 170 mm Total power requirement: 3.0 kW Machine weight: approx. 3,290 kg Space requirement: approx. 4042 x 1380 x 1254 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom roll) - with hydraulic conical bending device - Induction-hardened rolls - Includes calibration function for welded pipes - Control unit/display with touchscreen functionality * Digital position display for both side rolls - Mobile control panel - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety equipment (safety cord with switch unit) - Manometer / pressure gauge for the rolls - CE marking + Declaration of Conformity - Operating manual

Stanje: novo, Sheet width: 4100 mm Sheet thickness: 8.0 mm steel Pre-bending: 6.0 mm steel Top roll diameter: 300 mm Side roll diameter: 210 mm Bottom roll diameter: 270 mm Total power requirement: 7.5 kW Crjdpjxab Tcefx Afwji Machine weight approx. 9,930 kg Required space approx. 6532 x 1730 x 1489 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit / display with touchscreen function * Digital position indicator for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end - Safety device (safety cord with switch unit) - Manometer / pressure gauge for the rolls - CE marking + Declaration of Conformity - Operating manual

Stanje: novo, Sheet width: 4,100 mm Sheet thickness: 13.0 mm (steel) Pre-bending: 10.0 mm (steel) Top roll diameter: 360 mm Crsdjxabuyopfx Afwoi Side roll diameter: 250 mm Lower roll diameter: 330 mm Total power requirement: 11.0 kW Machine weight: approx. 16,000 kg Required floor space: approx. 6542 x 1677 x 1900 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top and bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit/display with touchscreen functionality * Digital position indicator for both side rolls - Mobile control desk - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) - Manometer/pressure gauge for the rolls - CE mark + Declaration of Conformity - Operating manual

Stanje: rabljeno, skupna dolžina: 3.230 mm, skupna širina: 1.150 mm, skupna višina: 1.120 mm, Leto proizvodnje: 2003 Barva: Siva Lastna teža: 1.400 kg Cena: Na zahtevo - Leto proizvodnje: 2003 - Dokumentacija na voljo: Da Cjdpfx Afezry N Hjweri - Prisotna je oznaka CE: Da - Prisotno je certifikat CE: Da - Serijska številka: 220281 - Nadzor: Konvencionalen - Pogon: Mehanski - Število valjev [kos]: 3 - Število pogonjenih valjev [kos]: 3 - Moč [kW]: 2,2 - Maksimalna debelina pločevine [mm]: 2 - Maksimalna debelina za predhodno upogibanje [mm]: 2 - Maksimalna delovna širina [mm]: 2050 - Premer zgornjega valja [mm]: 110 - Premer spodnjih valjev [mm]: 110 - Hitrost upogibanja [mm/min]: 3 - Dimenzije za transport: 3230 mm x 1150 mm x 1120 mm (d x š x v) - Transportna teža [kg]: 1400 kg - Transportni paketi [kos]: 1 Finančne informacije Davek na dodano vrednost: Navedena cena je brez davka na dodano vrednost Davek na dodano vrednost/davčni sistem na podlagi razlike: Za podjetja je mogoč odbitni davek na dodano vrednost. Dostava in prevzem starega stroja sta možna kadarkoli za vse izdelke iz industrijskega sektorja. Lukas van Rossum

Stanje: novo, Leto izdelave: 2026, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 220 mm, premer zgornjega valja: 220 mm, premer stranskega valja: 180 mm, premer valja: 220 mm, dolžina valja: 2.070 mm, najv. debelina jeklene pločevine: 10 mm, skupna masa: 4.900 kg, skupna dolžina: 4.050 mm, skupna širina: 1.550 mm, skupna višina: 1.470 mm, vhodna napetost: 400 V, število digitalnih zaslonov: 3, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, - 4 rollers - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm Crodpfju Evqhjx Afwei - Hardened rollers - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic operation - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Upper roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overload protection - Documentation - 400V

Stanje: novo, premer valja: 190 mm, delovna širina: 1.070 mm, najv. debelina jeklene pločevine: 10 mm, - Capacity 1070 x 10 - Bending force capacity 1070 x 9 - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamping) - Digital display for rear roller movement - Digital display for lower roller movement (material clamping) - Hardened rollers - Conical (tapered) rolling - Removable top roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V Csdjvvczdjpfx Afwjri

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, 4 HEL 3128 Four-roll Plate Rolling Machine Electronically controlled, hydraulic four-roll plate rolling machine Manufacturer: FACCIN, Model 4 HEL 3128 Technical data: Number of rolls: Four Side rolls geometry: Linear guides Working width: 3050 mm Top roll diameter: 285 mm Bottom roll diameter: 275 mm Side roll diameter: 205 mm Certified roll hardness: 950-1050 N/mm² Pressing force against top roll: 150 tons Working pressure at maximum force: 190 bar Guaranteed installed power: 11 kW (15 HP) Guaranteed maximum rolling speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450 mm Width: 1,520 mm Height: 1,450 mm Guaranteed capacities: With material yield strength 260 N/mm² Rolling capacity (full working width): 12 mm Csdpjiink Sjfx Afweri Pre-bending capacity (full working width): 8 mm from pipe diameter 1,425 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for roll movement Extremely wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double end-stopped swing bearing Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Central lubrication Cone bending device FACCIN AP package CNC control PGS-ULTRA

Stanje: novo, Sheet width 1000 mm Sheet thickness 8.0 mm Stand width 1070 mm Top roll diameter 150 mm Pre-bending capacity 6.0 mm Connected load 4.0 kW Machine weight approx. 1.4 t Space requirement approx. 2.6 x 0.65 x 1.1 m Cjdpfsfv H A Hsx Afwori Plate bending machine with section bending attachment - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Hardened rolls - Conical bending - Swiveling top roll - Brake motor - Emergency stop - Documentation in English - 400 V

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer valja: 200 mm, dolžina valja: 2.000 mm, delovna širina: 2.000 mm, najv. debelina jeklene pločevine: 8 mm, vrsta vhodnega toka: trifazni, delovna dolžina: 2.000 mm, Hydraulically Operated Four-Roller Plate Bending Machine Manufacturer: BIKO, Model B4 2020 Technical Data: Number of rollers: Four Side roller geometry: Linear guides Working width: 2,000 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Side roller diameter: 160 mm Rated installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200 mm Width: 1,000 mm Height: 1,100 mm Guaranteed Bending Performance: Credpfx Afsd Iclrjwsi For material with yield strength of 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,000 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 4 mm From tube diameter: 265 mm Standard Features: Linear guide system for roller movement Extra wide bearing blocks Needle bearings for roller rotation Extra heavy-duty, double-supported drop end bearing Hardened rollers for high wear resistance Hydraulic parallelism system for side rollers Digital display for side roller and lower roller positioning Cone bending device Control via swivel-mounted operator panel Safety trip wire with emergency stop and CE certification

Stanje: rabljeno, skupna dolžina: 7.800 mm, skupna širina: 1.700 mm, skupna višina: 1.580 mm, Leto izdelave: 2005 Barva: Zelena Lastna teža: 11.000 kg Cena: Na zahtevo - Leto izdelave: 2005 - Dokumentacija: Na voljo: Ne - CE-certifikat: Na voljo: Ne - Nadzor: Konvencionalen - Pogon: Hidravlični - Število valjev [kos]: 4 - Število pogonjenih valjev [kos]: 2 - Maks. debelina pločevine [mm]: 12 - Maks. debelina za predhodno upogibanje [mm]: 10 - Maks. delovna širina [mm]: 2500 Credpfx Afozkkrvjwsi - Premer zgornjega valja [mm]: 360 - Premer spodnjih valjev [mm]: 300 - Transportne mere: 7800 mm x 1700 mm x 1580 mm (d x š x v) - Transportna teža [kg]: 11000 kg - Transportni paketi [kos]: 1 Finančne informacije Davek na dodano vrednost: Navedena cena je brez vključenega davka na dodano vrednost. Davek na dodano vrednost/davčna obravnava: Podjetniki lahko odbijejo davek na dodano vrednost. Dobava in prevzem rabljene opreme je možen kadarkoli za vso opremo iz industrijskega sektorja. Lukas van Rossum

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, premer spodnjega valja: 140 mm, premer zgornjega valja: 140 mm, delovna širina: 1.500 mm, najv. debelina pločevine: 5 mm, skupna masa: 1.200 kg, Brez najnižje cene – zagotovljeno prodaja po najvišji ponudbi! TEHNIČNE PODROBNOSTI Število valjev: 3 kos Število pogonjenih valjev: 2 kosa Maksimalna debelina pločevine: 5 mm Maksimalna delovna širina: 1.500 mm Premer zgornjega valja: 140 mm Premer spodnjih valjev: 140 mm PODROBNOSTI O STROJU Csdjzza U Ujpfx Afwori Pogon: Hidravlični Upravljanje: Konvencionalno Moč: 3 kW Dimenzije in teža Dimenzije (D x Š x V): 2.900 x 900 x 1.400 mm Lastna teža: 1.200 kg Transportni paketi: 1 kos OPREMA CE oznaka

Stanje: novo, Fastech 3-Roll Plate Bending Machine FRS-S 2050 x 190 Technical Specifications: Special equipment included in the price: - Hardened rolls - Motorized rear roll adjustment - Motorized lower roll adjustment - 2 x digital display Sheet width: 2050 mm Cjdpfx Afohzq D Uswsri Sheet thickness: max. 7.0 mm Sheet thickness for prebending: 6.0 mm Roll length: 2050 mm Roll diameter: 190 mm Smallest bending diameter: 285 mm Weight: 2,695 kg Dimensions (L-W-H): 3600 x 1100 x 1200 mm Motor: 4 kW Equipment: - Top and bottom rolls driven electrically - Swing-out top roll - Conical bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operation console - Safety line - Values apply for St-37 / 240 N/mm² - CE marking

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Electronically controlled, hydraulic four-roll plate bending machine Manufacturer: FACCIN, Model 4 HEL/S 2122 Technical specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force against top roll: 100 tons Guaranteed installed power: 9.2 kW (12.5 HP) Guaranteed max. rotation speed: 4–8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: With material yield strength of 260 N/mm² Rolling capacity (full working width): 11 mm Credpod Eqg Hsfx Afwei Pre-bending capacity (full working width): 8 mm From pipe diameter: 1,100 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 286 mm Standard equipment: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty swing arm bearing, double mounted Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Hydraulically operated three-roll plate bending machine Manufacturer: FACCIN, Model: 3HEP 2021 Technical Specifications: Number of rolls: Three Geometry of side rolls: Linear guides Working width: 2,000 mm Top roll diameter: 215 mm Side roll diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000 mm Height: 1,100 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 13 mm Pre-bending capacity (full working width): 9 mm from tube diameter: 1,075 mm Rolling capacity (full working width): 9 mm Csdpfx Afscuxp Tjwsri Pre-bending capacity (full working width): 7 mm from tube diameter: 280 mm Standard Features: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation movement Extra heavy-duty, double-pinned swing arm bearing Hardened rolls for high wear resistance Hydraulic parallelism system for side rolls Digital readout for side roll positions Cone bending device Control via swiveling operator panel Safety pull-cord with emergency stop and CE certification Mobile control console

Stanje: novo, - Capacity 1570 x 9 mm Crsdpfxjg Ntlcs Afwoi - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamping) - Digital display for rear roller movement - Digital display for lower roller movement (material clamping) - Hardened rollers - Cone rolling - Removable top roller - Centralized lubrication system - Brake motor - Emergency stop - Documentation - 400V

Stanje: novo, Sheet width: 2070 mm Sheet thickness: 10 mm Pre-bending: 8 mm Total power requirement: 7 kW Machine weight: approx. 5 t Space requirement: approx. 4050 x 1470 x 1550 mm – 4 rolls – Capacity: 2070 x 10 – Bending capacity: 2070 x 8 – Hardened rolls – Upper roll diameter: 220 mm – Lower roll diameter: 220 mm – Side roll diameter: 180 mm – Hydraulic – Digital display for left roll movement – Digital display for middle lower roll movement – Digital display for right roll movement – Upper roll hydraulically swing-out – ST-52 steel construction – Hydraulic drop-end for easy roll positioning Cjdpevn U H Aofx Afwjri – Hydraulic up/down movement system with center and side rolls – Hydraulic balancing system – Overload protection – Documentation – 400V

Stanje: novo, Ostas 3-Roll Plate Bending Machine SMR-S 2070 x 190 Technical Specifications: Special features included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (LxWxH): 3750 x 920 x 1260 mm Motor: 4 kW Credpfog Nz T Ijx Afwei Equipment: - Upper and lower rolls electrically driven - Swing-out upper roll - Conical bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating console - Safety wire, CE mark

Stanje: novo, Ostas 3-Roller Plate Rolling Machine SMR-S 1570 x 170 Technical Specifications: Special equipment included in the price: - Motorized adjustment of the lower rolls - Hardened rolls - Motorized rear roll adjustment - 2 x digital readouts - Sheet width 1570 mm - Maximum sheet thickness 8.0 mm - Pre-bending sheet thickness 7.0 mm - Roll length 1570 mm - Minimum bending diameter 255 mm - Roll diameter 170 mm - Weight 1960 kg - Dimensions (L x W x H): 3200 x 920 x 1260 mm - Motor 5.5 kW Features: - Electrically driven top and bottom rolls - Swiveling top roll - Conical bending device Cedpeiw D Smsfx Afweri - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating panel - Safety line, CE mark - Values apply to St-37 / 240 N/mm²

Stanje: novo, Sheet width: 1570 mm Sheet thickness: 10 mm Pre-bending: 8 mm Total power requirement: 7 kW Machine weight: approx. 4.5 t Space requirements: approx. 3.5 x 1.5 x 1.55 m – 4 rolls Crjdpovkixxjfx Afwei – Capacity: 1570 x 10 mm – Pre-bending: 8 mm – Hardened rolls – Top roll diameter: 220 mm – Bottom roll diameter: 220 mm – Side roll diameter: 180 mm – Hydraulic operation – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swing-out – ST-52 steel construction – Hydraulic drop-end for easy roll positioning – Hydraulic up and down movement system with central and side rolls – Hydraulic balancing system – Overvoltage protection – Documentation – 400V

Stanje: novo, - Capacity 1070 x 8 mm - Electrically adjustable rear roller Csdpjgg N R Aefx Afwjri - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Hardened rollers - Conical rolling - Central lubrication system - Emergency stop - Documentation - Digital display for lower roller movement (material clamping) - Hardened rollers - Conical rolling - Swiveling top roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, EVO je najnovejša inovacija na področju obdelave pločevine. Opremljena je s številnimi inovativnimi in patentiranimi funkcijami, ki povečujejo proizvodno zmogljivost in produktivnost, hkrati pa ima najnižje skupne stroške obratovanja. Visokokakovostne komponente, ki se uporabljajo v tem stroju, ter najnovejša različica krmilnika BENDtronic®, ki je serijsko nameščen na vseh strojih EVO, so posebne prednosti. HAEUSLER EVO 21015, 4-valjna okrogla upogljalna naprava / valjna upogljalna naprava Proizvajalec: Haeusler Tip: EVO 21015, 4-valjna okrogla upogljalna naprava / valjna upogljalna naprava Poreklo: Nemčija / Švica Stanje: NOVO, razstavni stroj Razpoložljivost: 12-14 tednov Cjdpjxnnf Iofx Afwori Zmogljivost: Delovna širina 2100 mm Zmogljivost upogibanja okroglih profilov 12 mm Zmogljivost predhodnega upogibanja 9 mm Standardna oprema: • Variabilni oscilacijski premik stranskih valjev VSA® • HAEUSLER hibridni pogonski sistem HHDS® • Gibljiva 21,5-palčna zaslonska plošča z visokokakovostnim krmilnikom BENDtronic® • Brezstopenjsko nastavljiva hitrost vrtenja med 0 in 8 m/min • Stroj je pripravljen za oddaljeno vzdrževanje • Elektromehanski sistem za pritrditev zgornjega valja • Samodejna nastavitev pritiska spodnjega valja • Samodejno uravnavanje pritiska valjev, standardni hladilni sistem za sobno temperaturo do 35°C • Avtomatizirana optimizacija osi • Samodejna izklopitev hidravlike za nastavitev valjev • Ultrakompaktna zasnova za zmanjšanje ali celo izogibanje stroškom temeljev • Varnostna vrvica Neobvezna oprema: • Dvovaljni pogon zgornjega in spodnjega valja • Naprava za upogibanje stožčaste oblike, za upogibanje stožčasto oblikovanih delov • Razširjeni hladilni sistem za sobno temperaturo do 45 °C • Zgornja opora, za lažje upogibanje velikih premerov • Stranska opora, za pomoč pri upogibanju velikih premerov • Plinska akumulator, za kalibriranje že varjenih cilindrov • Programska oprema BendIT-Office za delovno mesto • Avtonomno upogibanje • Stroj je pripravljen za hitro menjavo zgornjih valjev • Zamenljivi zgornji valji z različnimi premeri, za upogibanje profilov z majhnim premerom • Kaljeni valji, če se upogiba črna in nerjavna pločevina • Dovodni valj za enostavno dovajanje pločevine v stroj • Centrirna naprava za dovodni valj, za samodejno centriranje pločevine pred upogibanjem Ali ni ta stroj primeren? Kot predstavnik podjetja Haeusler lahko za vas sestavimo in ponudimo stroj po vaših željah in potrebah. Dodatne informacije so na voljo po povpraševanju.

Stanje: novo, Ostas 3-Roller Plate Bending Machine SMR-S 1070 x 130 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized adjustment of rear rollers - Digital display - Sheet width: 1070 mm - Maximum sheet thickness: 7.0 mm - Bending sheet thickness: 6.0 mm - Roller length: 1070 mm - Smallest diameter: 195 mm - Roller diameter: 130 mm - Weight: 1150 kg - Dimensions (LxWxH): 2550 x 630 x 1020 mm - Motor: 3.75 kW Equipment: - Electrically driven top and bottom rollers - Top roller can be swung out - Conical bending device Crjdpfsiw D Dxex Afwsi - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable, CE mark Values are valid for St-37 / 240 N/mm²

Stanje: novo, Ostas 3-Roll Plate Bending Machine SMR-S 1070 x 130 Technical Specifications: Special Equipment Included in Price: - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 1070 mm Sheet thickness: max. 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 1070 mm Smallest bending diameter: 195 mm Roll diameter: 130 mm Weight: 1150 kg Dimensions (L-W-H): 2550 x 630 x 1020 mm Motor: 3.75 kW Features: Crodpoiw D Dmofx Afwoi - Upper and lower rolls electrically driven - Swiveling upper roll - Cone bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operator panel - Safety cord, CE mark Values valid for St-37 / 240 N/mm²

Stanje: rabljeno, Max. bending length: 2000 mm Max. sheet thickness: 8 mm (steel) Crodpemhm Elsfx Afwji Right and left rotation Motorized rear roller adjustment Safety emergency stop switch Tapered rolling possible

Stanje: rabljeno, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Haltearme links/rechts Cedpfxs Dvlij Afwsri * Hydraulischer Hubturm * Hydraulische Vorbiegung