Leto izdelave: 2020, stanje: novo, Profesionalni vrtalnik za zemljo, premer 400 x 1000 mm, z rezilom iz jekla Hardox. Fpodpfxedf R Rqe Aprek Robusten vrtalnik za zemljo, primeren za našo nosilno konstrukcijo ali po želji za druge priključke. Številka artikla: MT18-EB-400-1000

Leto izdelave: 2020, stanje: novo, The root cutter is equipped with 9 durable indexable carbide inserts that can be rotated multiple times when dulled. The inserts have a long service life. The inserts are available with 3 different rake angles to optimally process various hardwoods. The cutter can also be used to mill flower boxes or to perform other milling tasks. Fpodpfodf Sd Sox Aprok Article number: MT18-WF300

Leto izdelave: 2022, stanje: novo, Z nosilno napravo je mogoče uporabljati različne naprave, kot so stroji za cepljenje kolov, vrtalne naprave za zemljo, stroji za brušenje korenin, stroji za čiščenje površin, diskovne kultivatorji in še mnogo več. Naprave so razvite in izdelane v Nemčiji. Zahvaljujoč izjemno stabilnim valjčnim ležajem se sile varno prenašajo v aksialni in radialni smeri. Velik, zmogljiv hidravlični motor tipa HMT500 zagotavlja navor do 1600 Nm, kar je potrebno za močno in učinkovito delovanje. Volumen olja do 125 l/min, tlak do 210 bar, hitrost vrtenja 240 vrt/min. Številka artikla: MTT500 Vrtalne naprave za zemljo, vrtalni stožci in druga orodja so na voljo na zahtevo in za doplačilo. Sistem za hitro menjavo orodij MS 01 - MS03 - MS08 ali drugi adapterji so prav tako na voljo na zahtevo in za doplačilo. Fsdpfx Apodf Sgrjrjpk

Stanje: novo, Hydraulic Winch HAW3000 with Electric Valve and Radio Remote Control for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. The hydraulic attachment winch HAW3000 makes many tasks much easier. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm steel cable. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm steel cable. Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard configuration: 30 m of 8 mm steel cable ⦁ For use in viticulture, agriculture, forestry, and landscaping ⦁ In building construction, civil engineering, and road construction ⦁ For pulling out root stumps and trees ⦁ As an attachment winch for forwarding cranes and excavators ⦁ As a winch for tractors, machinery, and grape harvesters Robust steel design with 3-way mounting options (left, right, rear) using M12 threaded holes. This offers multiple possibilities for attaching the winch. (Threads are cut and painted. For rust protection, threads must be recut before use.) Large lubricatable cable reel for long service life of the steel wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, temporarily up to 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at oil flow of 125 l/min ⦁ Weight: 95 kg ⦁ Colour: red Fpjdpfofn Tu Tjx Aprek The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the required pulling speeds and forces, we can offer you different options. Contact us – we’re happy to advise you.

Stanje: novo, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, agricultural tractors, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can greatly facilitate many tasks: - Pulling and positioning firewood to the log splitter - Loading logs onto trailers - Extracting root stocks and trees - As an auxiliary winch for forestry cranes and compact excavators - As a winch for small tractors and narrow-gauge tractors Featuring a robust steel construction with three-sided mounting possibilities (left, right, rear) and 12 threaded holes, offering versatile mounting options for the winch (threads are pre-cut and painted. They should be retapped prior to use for corrosion protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We fit hydraulic motors ranging from 50 to 630 cc (standard = 400 cc), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1,700 kg Fpedpfxodf Ufde Aprsk Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow rate Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version comes with an electric hydraulic valve and hoses for the motor. Article number: HAW1700-EV NOTE: Images 2, 3, and 4 are mounting examples!

Stanje: novo, Hydraulic Cable Winch HAW4000 without Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the hydraulic attachment winch HAW4000, you can simplify numerous tasks. Maximum cable capacity at 4,000 kg pulling force: 60 m using 10 mm wire rope. Maximum cable capacity at 3,000 kg pulling force: 90 m using 8 mm wire rope. Maximum cable capacity at 1,700 kg pulling force: 150 m using 6 mm wire rope. Maximum cable capacity at 3,500 kg pulling force: 150 m using 6 mm synthetic rope. Maximum cable capacity at 2,000 kg pulling force: 220 m using 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ For viticulture, agriculture, forestry, and horticulture ⦁ For construction, civil engineering, and road construction ⦁ For pulling out stumps and trees ⦁ As an auxiliary winch on skidding cranes and excavators ⦁ As a winch for tractors, agricultural machinery, and grape harvesters A robust steel construction with 3-way mounting options (left, right, rear) using M16 threaded holes, offering multiple possibilities for winch attachment. (Threads are cut and painted. For corrosion protection, they must be recut before use.) Large, greaseable cable roller for a long service life of the wire rope. ⦁ Maximum operating pressure: 210 bar peak ⦁ Oil flow up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4,000 kg ⦁ Cable speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg Fpsdpfefn Tvisx Aprsk ⦁ Color: red The winch can be mounted in various positions. A hydraulic brake is available as an option. Depending on your required pulling speeds and forces, we can offer different options. Contact us – we are happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with cable inlet: 970 mm ⦁ Width front: 200 mm ⦁ Width rear: 300 mm ⦁ Bearing width: +50 mm ⦁ Motor width: +300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: novo, Hydraulic Winch for Log Splitters, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture and many other applications. This hydraulic attachment winch can make a wide range of tasks easier for you. - Pulling and positioning firewood for the log splitter - Pulling logs onto trailers - Extracting rootstocks and trees - Use as an auxiliary winch for forwarding cranes and small excavators - Winch for small tractors and narrow-track tractors Rugged steel construction with triple-sided mounting ability (left, right, rear) using 12 threaded holes, providing numerous installation options (threads are pre-cut and painted. They require re-tapping with a tap before use to remove the corrosion protection coating). Supplied with a 20 m long, 6 mm thick steel cable. Large drum for extended cable service life. We fit hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on your speed and pulling force requirements. Max. working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Max. pulling force: 1,700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Fpjdpfedf Ud Sox Aprsk Dimensions: Length: 500 mm Length with pivot mount: 570 mm Width front: 120 mm Width rear: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm Winch available for bolting or welding installation. This version is equipped with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Images 2, 3 and 4 are example installation illustrations!

Stanje: novo, Hydraulic Winch HAW1700 with Electric Valve incl. Manual Control and Wireless Remote Control for mounting on log splitters, cranes, mini excavators, tractors, forklifts, slope mowers, and telehandlers—in viticulture, horticulture, agriculture, construction, forestry, and many other applications. Equipped with an electric hydraulic valve and radio remote control. The HAW1700 hydraulic add-on winch makes many tasks easier. Maximum cable capacity: 30 m with 6 mm steel cable. Standard equipment: 20 m of 6 mm steel cable ⦁ Skidding firewood to the log splitter and positioning it ⦁ Pulling timber onto trailers ⦁ Extracting stumps and trees ⦁ As an auxiliary winch for forestry cranes and small excavators ⦁ Winch for small tractors and narrow-gauge tractors Robust steel construction with mounting possibilities on both sides (bottom, rear, top) with M12 threads. This provides flexible application options for the winch. Large, double-supported cable sheave for long service life of the steel cable. Standard pulling force is 1700 kg. The winch can be installed in various positions. Optional hydraulic brake available. Depending on the pulling speed and force you require, we can offer different configurations. Contact us—we are happy to advise you. ⦁ Maximum operating pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 cc ⦁ Torque at 225 bar: 870 Nm (peak) ⦁ Continuous torque: 380 Nm ⦁ Maximum pulling force: 1700 kg Fpedpfx Aefn Tvheprjk ⦁ Weight: 49 kg ⦁ Cable speed: 47 m/min at 60 L/min oil flow ⦁ Colour: red ⦁ Including hoses from valve to motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope guide: 570 mm ⦁ Width (front): 120 mm ⦁ Width (rear): 180 mm ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Wireless remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature range: -35°C to +80°C ⦁ Protection class: IP65

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina vrvi: 30.000 mm, hitrost vrvi: 47.000 mm/min, številka stroja/vozila: HAW1700-EV-Funk, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard and horticultural machines, and many other applications. With the hydraulic auxiliary winch, you can make many tasks easier: - Pull and position firewood for the log splitter - Load logs onto trailers - Extract root stumps and trees - Serve as an auxiliary winch for forestry cranes and small excavators - Winch for compact tractors and narrow-track tractors Robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, offering flexible mounting possibilities (threads are cut and painted; for corrosion protection, they should be re-tapped before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for prolonged cable life. We supply hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pull force. Maximum working pressure: 225 bar peak Continuous pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous operating torque: 380 Nm Maximum pulling force: 1700 kg Fpededf Ufpopfx Aprsk Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolt-on or weld-on installation. This version is equipped with an electric hydraulic valve, radio remote control, and hoses to the motor. Article number: HAW1700-EV-RC

Stanje: novo, Hydraulic Winch HAW4000 with Electric Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the HAW4000 hydraulic attachment winch, you can significantly ease a wide variety of tasks. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard configuration includes 50 m of 10 mm wire rope. ⦁ Suitable for viticulture, agriculture, forestry, and horticulture ⦁ For building construction, civil engineering, and road construction ⦁ For pulling out rootstocks and trees ⦁ As an attachment winch for timber cranes and excavators ⦁ As a winch for tractors, work machines, and grape harvesters Robust steel construction featuring mounting options on three sides (left, right, rear) with M16 threaded holes. This allows for a wide range of installation configurations. (Threads are machined and painted; for corrosion protection, threads must be re-cut before use.) Large, greaseable cable pulley ensures long service life for the wire rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow: up to 200 l/min, temporarily max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Colour: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on your required pulling speed and force, we can offer you different options. Please contact us for expert advice. Fjdpfxjfn Tvks Aprjpk Dimensions: ⦁ Length: 850 mm ⦁ Length with rope guide: 970 mm ⦁ Width (front): 200 mm ⦁ Width (rear): 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Conical Log Splitter / Excavator Splitter / Drill Cone Splitter / Log Splitter KS4 Drill Cone 200x400 – Made in Germany The powerful conical splitter for attachment to mini excavators, excavators, wheel loaders, tractors, timber trailers, and many other carrier vehicles. The drill cone can be swapped for various tools such as a root grinder, earth auger, humus sieve, concrete mixing drum, weed brush, and many other attachments. The conical splitter consists of a robust drive unit and the drill cone (splitting cone), which is fully hardened—not made from non-hardened steel like many other manufacturers use. Easily convertible to other implements with just a few simple steps. • Conical splitter • Root grinder • Earth auger • Weed brush • Broom • Power harrow NO CHINESE IMPORTS! WE MANUFACTURE IN GERMANY! Fjdpfsupiapjx Aprspk The ideal multipurpose tool for forestry professionals, farmers, landscapers, DIYers, and professionals. Total length 600 mm plus attachment and quick-change system Universally applicable in construction, forestry, agriculture, and landscaping For splitting thick firewood or wood for wood chips For drilling earth holes for posts, plants, and much more For removing root stocks and tree stumps For cleaning ditches and paved surfaces For leveling garden areas and creating a fine soil structure You can do all the work directly from the excavator without any additional help. A very solid and stable steel construction allows for tough and long-lasting work. In addition to the motor, the shaft is supported by two sturdy tapered roller bearings to withstand both axial and radial loads. The tapered roller bearings are greaseable for a long service life. A powerful HMT 400 hydraulic motor provides up to 1,600 Nm of torque for efficient operation, with flow rates from 25 l/min up to 125 l/min and 210 bar pressure. Weight: 70 kg Included: • Drive unit with powerful HMT hydraulic motor, weight 70 kg • Drill cone with tip, Ø 200 mm, 270 mm/400 mm long, front face 6xM16 threads, PCD 173 Total length 270 mm + cone tip 130 mm = 400 mm Diameter: 200 mm Weight: 30 kg Total weight: 100 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, skupna masa: 100 kg, skupna višina: 1.000 mm, barva: rdeča, neprekinjen delovni tlak: 210 letvica, največji navor vretena: 1.800 Nm, Oprema: hidravlika, Conical Splitter / Excavator Log Splitter / Drill Cone Splitter / Wood Splitter KS5 Drill Cone 200x400 – Made in Germany The robust conical splitter for mounting on mini excavators, excavators, wheel loaders, tractors, forwarding trailers, and many other applications. The drill cone can be exchanged for various attachments such as root cutters, earth augers, compost screens, concrete mixing drums, weed brushes, and many more implements. The cone splitter consists of a highly durable drive unit and the drill cone (splitting cone). The drill cone is fully hardened—not made from unhardened steel like many other manufacturers. Conversion to different attachments can be carried out with just a few steps. • Conical splitter • Root cutter • Earth auger • Weed brush • Sweeper • Power harrow NO CHINESE PRODUCTS! WE MANUFACTURE IN GERMANY! THE ideal multipurpose tool for forestry professionals, farmers, landscapers, DIYers, and professionals. Total length 600 mm plus attachment and quick-change system Universal applicability in construction, forestry, agriculture, and landscaping For splitting heavy firewood or wood for wood chips For drilling earth holes for posts, plants, and much more For removing root stocks and tree stumps For cleaning ditches and paved surfaces For levelling garden areas and achieving a fine soil structure All work can be conveniently performed from the excavator without additional assistance. The very solid and robust steel construction ensures durable and heavy-duty operation. The shaft is additionally supported by two robust tapered roller bearings, both for tension and compression, in addition to the motor. The roller bearings are lubricatable for extended service life. A high-performance HMT 500 hydraulic motor provides up to 1,800 Nm of torque for efficient operation, from 25 l/min up to 125 l/min and 210 bar pressure. Weight: 70 kg Includes: • Drive unit with powerful HMT hydraulic motor, weight 70 kg • Drill cone with point Ø 200 mm, 270 mm/400 mm long, front side 6xM16 threads LK173 Total length: 270 mm + cone tip 130 mm = 400 mm Diameter: 200 mm Weight: 30 kg Fpodouph Uxjpfx Aprok Total weight: 100 kg

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 1.120 h, moč: 53 kW (72,06 KM), Oprema: pogon na vsa štiri kolesa, sprednja priključna naprava, * Nemški stroj od prvega lastnika, v zelo dobrem stanju * TABMC040VK5115005 * Redno servisiran po servisni knjižici * Homologiran za cestno uporabo, 40 km/h * Pogon 4x4 * Leto izdelave 2021 * Delovna masa 6.200 kg * Pnevmatike 340/85 R24 spredaj, 420/85 R34 zadaj, cca 80% * * Video pošljem preko WhatsAppa * WhatsApp: * Kontakt v poljščini, ????? ?????: * Prodaja samo pravnim osebam brez garancije, vse informacije brez zagotovila, vmesna prodaja možna Fpsdpfxey Ubguj Aprjk

Stanje: novo, Jensen serijski pralni stroj Fjdpfsy Uih Tex Aprspk 5 kosov tesnila prirobnice za iztočni ventil Jensen 700237382 8 kosov tesnila za parni injektor 370x140x4 2 kosa tesnila za parni injektor 9005220191

Stanje: novo, Odtokni ventil Jensen DN 100 Fpsdpjy Uigijfx Aprok Številka izdelka Jensen 700280766

Stanje: skoraj kot novo (rabljeno), Posimon valjasti boben 110 mm z nosilcem Za serijsko pralnico Jensen Fpodpfx Apsy Uim Asrsk

Stanje: novo, 9 kosov Jensen senzorjev Fpsdpey Ukgwsfx Aprek OPR 2 ND 99812

Stanje: novo, 3 kosi PT100/1000 Jensen Fodpoy Ukgdjfx Aprepk

Stanje: rabljeno, Kotlovnica Viessmann Paromat-Triplex RN z oljnim gorilnikom Weishaupt WL40Z-A, letnik 2015! Spletni video pregled prek WhatsAppa, MS Zooma, Telegrama. Na zalogi v Emskirchen/Nürnberg - Takoj na voljo - Možen preizkus. Fpodpfxsxc Ipce Aprjk

Stanje: rabljeno, Kiper oz. prikolica 3170 kg D x Š x V: 4,0 x 2,3 x 2,6 m Višina tovornega prostora: 1,4 m je kiper z zračnim dvigalom Stranske stene: jeklo Fpjdpszkgvdefx Aprek Na voljo: takoj

Stanje: rabljeno, Splošna ocena (1: slabo, 5: kot novo): Nova naprava ---- Združljivo z električnimi jedrnimi vrtalnimi stroji ? Večfunkcijska zasnova ? Sistem za hitro menjavo strojev ? Možnost poševnega vrtanja ? Teža 22,5 kg ? 300 mm maks. premer vrtanja Sestavljeno iz: 20319849: DIV Okvir za vrtanje cevi, tip DD300, iz nerjavečega jekla 20319860: DIV Zemeljski pritrdilni klin, L = 800 mm, 3 kosi 20319861: DIV Dodatna oprema, komplet orodij 20319862: DIV Podložna plošča 20319863: DIV Podstavek za bager 20319864: DIV Podaljšek 1/2" za vrtalno glavo Fedezk Agxspfx Apropk Brez vrtalnega motorja!!!!

Stanje: novo, Leto izdelave: 2020, Številka skladišča: 100504097 Transportne mere (D x Š x V): 0 x 0 x Kosov na voljo! FE betonski silo 1016H.12 PAM 1000 l, lakiran Serijska številka: P002875 Št. opreme: 100504098 Letnik: 2020 Valjasto-stožčasta oblika in ravna izhodna odprtina cevi, z ročno krmilno ročico in standardno nameščeno verigo. Stransko nameščen koš za dvig oseb z rešetkastim dnom za upravljanje z ročno krmilno ročico na mestu namestitve betona. Fpsdpfjzk Acgjx Aprjk Lastna teža v kg: 610 kg Prostornina v l: 1.000 l Nosilnost v kg: 2.680 kg Minimalna nosilnost dvižnega mehanizma v kg: 4.905 kg Skupna teža v kg: 3.290 kg

Stanje: novo, Leto izdelave: 2020, Številka skladišča: 100304760 Transportne dimenzije (D x Š x V): 0 x 0 x 0 Fpodpfx Aszk Af Ioprek

Stanje: novo, Leto izdelave: 2012, Številka skladišča: 100106518 Transportne mere (D x Š x V): 0 x 0 x Kosov na voljo Merz razdelilnik V160/K/FU/BR, serijska številka: #A112 EQ: 100106518 Letnik izdelave: 2012 Merz razdelilnik V160/K/FU/BR, serijska številka: #A113004292000001 EQ: 100107728 Letnik izdelave: 2013 Merz razdelilnik V160/K/FU/BR Fpsdpfxozk Aalo Aprsk Serijska številka: #5739 EQ: 100108035 Letnik izdelave: 2013

Stanje: novo, Leto izdelave: 2011, Številka skladišča: 100105860 Transportne mere (D x Š x V): 0 x 0 x 0 Fpedpfx Aezk Abvoprsk