Hidravlične dvostebrične preše in štiristebrične preše nakup rabljenega (310)

Stanje: pripravljen za uporabo (rabljen), skupna višina: 2.140 mm, skupna širina: 865 mm, skupna dolžina: 1.665 mm, širina prehoda: 1.100 mm, moč: 2,2 kW (2,99 KM), lastna masa: 970 kg, nosilnost: 100.000 kg, Arlo 100 T / 1000 Vario Maksimalna nastavitev bata: 380 mm Hitrost približevanja: 7,54 mm/s Delovna hitrost: 2,47 mm/s Povratna hitrost: 9,06 mm/s Gjdpfx Ajxc Rbbjb Tsuk

Stanje: rabljeno, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture 1986 - rebuilt in 2000 Pressing force: 200 tons Frame opening (front): 2050 mm Frame passage (side): 2030 mm Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid approach speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Mains connection: 380 Volt, 50 Hz - 8-way flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in upper dead center - Position measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - 2-hand control panel, free-standing - Floor-level installation - Central lubrication - Operating manual with circuit diagrams Space required for press (upright), L x W x H: 3700 x 2900 x 5900 mm Overall machine height with motor: 5900 mm Space required for horizontal transport, L x W x H: 5900 x 3250 x 2950 mm Weight: 38 tons Gjdpfsdzp Tcex Ab Tsuk The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Good condition.

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 250 t, širina mize: 1.600 mm, dolžina mize: 2.650 mm, skupna masa: 55.000 kg, hod blazine orodja: 235 mm, Hydraulic deep drawing press, manufacturer Wanzke, model GTA 250 Year of manufacture: 1995, used Technical specifications: Press force: 2,500 kN Guodpjup Skwsfx Ab Tjk Ram stroke: 600 mm Ram speed (working stroke): 25 mm/s Blank holder force: 1,600 kN Blank holder stroke: 235 mm Table clamping area: 2,650 x 1,600 mm Stroke limit spindles: 2 pcs. Damping cylinders: 2 pcs. Drive power: 75 kW Dimensions of the press: approx. width 4,250 mm (without enclosure), depth 2,000 mm, height 5,150 mm Weight: 55 tons Table: Drillings for locating pins in the center of the press table. Additional drillings are spaced at 150 mm intervals to the right and left from this point. There is also a central drilling in the width of the press table. The hole spacing is also 150 mm. Maximum of 15 locating pins can be used lengthwise and 7 pins in width. Locating pin diameter: 30 mm

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, - Model: T40756W1-Xa5C/F14F-GO16B-VPPX-XS15/523-SO28JR/N-F10 - Type: Hydraulic power unit (compact unit for industrial hydraulic applications) - All technical specifications: - Material: Steel tank and frame for durability; standard hydraulic components - Voltage: 230/400 V AC (configurable) Gujdpfx Abjuadbuj Tek - Phases: 3-phase - Frequency: 50/60 Hz - Motor power: 0.75 kW - Pump displacement: 1.6 cc/rev - Flow rate: 2.208 liters/min (at 1380 rpm) - Relief pressure: 160 bar - Tank volume: 15 L - Medium: Hydraulic oil (mineral base, HLP/DIN 51524 recommended) - Filtration: Standard inline filter (≥10 µm) - Operating temperature range: -20°C to +80°C (-4°F to +176°F) - Protection class: IP54 (motor); suitable for industrial environments - Standards: ISO 4413; CE marked - Certification: CE; RoHS compliant - Features: Compact design for space-saving; includes motor, pump, tank and relief valve; suitable for actuators and machinery - Dimensions: 360 mm length x 240 mm width x 550 mm height - Weight: 0.15 kg (approx., based on compact unit) - Country of origin: Denmark - HS code: 8412.21 (hydraulic power engines and motors) LARGE STOCK AVAILABLE

Stanje: rabljeno, Pressing force 400 kN, table size 450x560 mm, ram size 375x300 mm, distance from table to ram 340 mm, stroke 160 mm, through hole 100 mm diameter, lateral frame passage 220x410 mm. Guodeum Uuyjpfx Ab Tek

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Manufacturer: EMANUEL Model: DEA 800 Godpfx Aswiidwsb Touk Year: 2000 Condition: Used Stock number: Cod.0337 Capacity: 800 tons Ram stroke: 900 mm Approach speed: 400 mm/sec Working speed at 100%: 15 mm/sec Working speed at 50%: 31 mm/sec Ram return speed: 400 mm/sec Maximum vertical clearance: 1,500 mm Die table dimensions: 2,500 x 1,500 mm Blank holder table dimensions: 2,380 x 970 mm Blank holder cushion - total force: 600 tons Blank holder cushion stroke (lower): 450 mm

Stanje: pripravljen za uporabo (rabljen), širina prehoda: 780 mm, moč: 30 kW (40,79 KM), lastna masa: 11.000 kg, nosilnost: 450.000 kg, Prehod med stebri: 780 mm Maksimalna nastavitev bata: 800 mm Razdalja med mizo in batom: 1200 mm Površina mize: 1200 x 780 mm Elektromotor: 30 kW Teža: 11 ton 4-stebrična hidravlična stiskalnica visoka hitrost zapiranja idealno za kompozitne projekte stiskalnica lahko dalj časa stoji pod pritiskom en enojno delujoč glavni hidravlični bat dva manjša bata za vračanje stiskača Gsdpsxb E E Ejfx Ab Tjuk ogrevanje je možno kot opcija (vklop/izklop) Maksimalna nastavitev bata: 800 mm Razdalja med mizo in batom: 1200 mm Površina mize: 1200 x 780 mm

Stanje: rabljeno, Machine not operational – Control system not functioning Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column spacing front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram return force: approx. 22 tons Adjustable approach speed: 100–800 mm/s Pressurization up to 5000 kN: approx. 0.7 sec Return speed: approx. 300 mm/s Main drive motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz Gusdpfx Abjdzqpte Tek - 8-way flat guide for the ram - Hydraulic ram locking at top dead center - Separate control cabinet (200 x 50 cm) - Electrical control SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - Adjacent two-hand control console - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons. The machine was used for straightening red-hot steel flanges. From insolvency – in good condition

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, vgradna višina: 700 mm, stiskalna sila: 250 t, širina mize: 1.250 mm, dolžina mize: 1.150 mm, hod blazine orodja: 150 mm, hod: 400 mm, Hydraulic Double Column Press DUNKES HDS 250/10 Year of manufacture: 1992 Technical specifications: Pressing force at 260 bar: 250 t Rapid approach speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Drawing cushion area approx.: 800 x 1000 mm Drawing cushion pressing force (200 bar): 100 t Drawing cushion stroke: 150 mm Gsdpoup Si Hefx Ab Tjuk Power requirement: 45 kW Installation height: 700 mm Ram stroke: 400 mm Control upgrade to SIEMENS (in 2005) Machine height approx. 5,400 mm Control panel language currently in Polish

Stanje: rabljeno, Leto izdelave: 1991, Presskraft 400 t Hub 300 mm Aufspanntischfläche 1200 x 700 mm Gujdpfxstqqlco Ab Tek Stößelfläche 1200 x 700 mm Einbauhöhe 500 mm Hubverstellung 300 mm Rückzugkraft 348 kN Auswerferkraft 100 kN Auswerferhub 100 mm Steuerung SIEMENS Simatic S 5 Gesamtleistungsbedarf 65 kW Maschinengewicht ca. 28 t Abmessungen (L x B x H): 4,4 x 2,75 x 4,0 m = Rahmenpresse Zubehör: Werkzeugwechseltisch - mit Schnittschlagdämpfung Dämpfkraft 4000 kN Dämpfhub 5 mm Spindelverstellung 200 mm

Stanje: novo, Leto izdelave: 2024, Double-column press 250 tons (3000 kN) at 245 bar Stroke: 1000 mm Installation height: 1200 mm Ram plate: 1400 mm x 1200 mm Table plate: 1400 mm x 1200 mm Complete Rexroth hydraulic system Siemens PLC Approach speed: 170 mm/sec Pressing phase: 8 - 15 mm Gsdpfskw Rbdex Ab Tsuk Return stroke: 150 mm Return speed: 110 mm/sec Main motor: 30 kW Sample image

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, Portal frame press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Clear opening height 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature display on tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots according to customer specification, otherwise 22 mm i) Controls mounted on a pivoting arm attached to the bridge j) Pressure adjustable from 50 T up to 300 T via MONITOR k) Bridge travel driven by two geared motors, rack and pinion drive l) Cylinder moves left and right via rack and pinion drive m) Machine body double-coated n) Cylinder induction-hardened Design Type: Gantry Press Thermally neutral 80–120 °C Number of operator sides: 3 Forces Maximum pressing force: 3,000 kN Maximum free tear-off force: 500 kN Pressure build-up time (closed die, steel on steel): Max. 3 sec Dimensions Maximum opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 980 mm Height above floor (overall height): approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at maximum closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press (without operating fluids and table plate): approx. 22 T Speeds Rapid closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Sound Pressure Gedeh Agnujpfx Ab Teuk Sound level measured at 1.5 m height at control panel: max. 78 dB(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders: 1 Operating pressure: max. 350 bar Pressing pressure build-up time: 2-3 sec Pressure accuracy during pressing stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: HLPD 46 MW, 900 liters Ambient temperature: max. 45 °C Oil temperature: max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Connection for hydraulic main motor: IE3, 22 kW Total connected load: approx. 30 kW

Stanje: dober (rabljeno), Leto izdelave: 1990, 1. Machine Data Manufacturer: Hydrap Pressen Maschinenbau GmbH Gusdpfet D Eivjx Ab Tok Designation: Hydraulic Press Model: HPDZb 250 Serial No.: H40/ 6323 Year of manufacture: 04/1990 Weight: 30 tonnes Dimensions (L x W x H): 4 x 4.5 x 6 m 2. Connection Data Mains voltage: 380 V Frequency: 50 Hz Power: 55 kW 3. Technical Data Distance between uprights: front 1350 mm, lateral 720 mm Nominal force: 2500 kN Number of hydraulic cylinders: 1 Clamping table: 1300 x 1000 mm Stroke adjustment: 450 mm 4. General The drawing cushion is defective and needs to be repaired. The machine is available immediately. The machine has been disconnected from the mains, as it had to be relocated due to conversion works. Sale ex works: dismantling, removal, loading, and transport at buyer’s expense.

Stanje: rabljeno, Double-column Hydraulic Press SCHÖN Model SH 25 Machine No. 4453 Year of manufacture: 1999 Pressing force: 25 tons Column gap: 500 mm Lateral column opening: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Electrical connection: 380 Volt, 50 Hz Godpfxow A Amre Ab Tsuk - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid traverse and working stroke - Stroke limiter, pressure- or path-dependent - Mechanically adjustable fixed stop - Press force regulation - Pressing time extension 1-10 s (pressure holding time) - Adjustable return stroke speed - Prepared for electric blow-off device (without air valve) - Hydraulic tool safety, manually adjustable via handwheel Required space (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 1000 t Gap width: 5000 mm Stroke: 500 mm Center height: 400 mm Machine dimensions: 6000 x 2500 mm Weight: 1000 kg Center distance: 3500 mm Machine weight approx. 220 t Hydraulic 1,000 ton press Table size: 3500 x 2200 mm Distance between table and ram: min. approx. 400 mm / max. approx. 1580 mm Drawing cushion in the table with 500 mm stroke and 300 ton counterforce External dimensions approx. 6000 x 2500 mm Height approx. 8500 mm (above floor level) Pit depth (for hydraulics and other units): approx. 5000 mm Total weight approx. 220 t; the heaviest single part is the head piece at approx. 64 t Siemens control system As it is equipped with a cutting shock absorber, the machine can also be used for punching (cutting). The side columns have passages of approx. 1,100 mm width. Thus, punching tools can be supplied with strip material from both sides. Technical data – see images Gusdpfxewwl R Ae Ab Tsk

Stanje: rabljeno, Leto izdelave: 1982, Presskraft 40 t Ständerweite 695 bzw. 215 mm Gujdpfxstqqq Re Ab Tjk Hub 100 mm Tischaufspannfläche 650 x 440 mm Stößelfläche 580 x 285 mm Einbauhöhe 400 mm Gesamtleistungsbedarf 15 kW Maschinengewicht ca. t Abmessungen der Maschine (L x B x H): 1,63 x 1,05 x 2,61 m - mit Ziehkissen - mit SICK-Lichtschranke

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Preša s hidravličnim agregatom naprodaj Gsdpfow Izriox Ab Tjuk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 1.500 mm, dolžina mize: 1.000 mm, hitrost vzvratne vožnje: 10 mm/s, širina plošče bata: 1.500 mm, dolžina plošče bata: 1.000 mm, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 1.200 mm, moč: 9 kW (12,24 KM), Oprema: varnostna svetlobna zapora, If the press does not exactly match your requirements, simply request a customized quote tailored to your specifications with one click: HIDROBRASIL manufactures presses precisely according to your wishes — at surprisingly attractive prices! ##### Mold opener/closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Technical Data: Pressing force: 40 tons Maximum open height: 1800 mm Ram stroke: 1500 mm Oil temperature monitoring: Electric air cooling Lubrication: Manual via grease nipples Travel of extendable table: 1200 mm Speed of extendable table: 30 mm/sec Electrically steplessly rotating ram: Up to 180 degrees T-slots: To customer's specification Pressure adjustment: From 10 tons to 40 tons Monitor: 10" on control cabinet for pressure adjustment and warning alerts Two-hand operation Special Features: Insulation of clamping plates towards the ram: Via resin insulation plate and special ventilation plate Hydraulic system: Components from BOSCH, REXROTH, PARKER, ATOS Safety components: By SICK Control: SIEMENS Remote maintenance unit: SECOMEA - Ethernet Installation and Operating Conditions: Gsdpfxotwmp Sj Ab Touk Maximum ambient temperature: 40 °C Height above ground (installation height): Approx. 3800 mm Total weight of the press without operating fluids: Approx. 13 tons This machine is delivered in the colors specified by the customer and complies with all statutory requirements and EU standards. ##### Are you looking for a precisely tailored machine? Contact us for a personalized offer.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Pressing force: max. 630 t Installation height: max. 375 mm Stroke: max. 275 mm Gedpfx Asgwv S Ueb Touk Weight: 4,500 kg

Stanje: rabljeno, Leto izdelave: 1952, Machine type: Deep Drawing Press Manufacturer: SACK & KIESSELBACH Model: EP500 Year of manufacture: 1952 Pressing force: Gusdpfx Abjwxw H Ee Tek 500 tons Clear width: 450 mm Location: In Germany

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.700 mm, stiskalna sila: 1.000 t, širina mize: 1.500 mm, tabela razdalj do bata: 1.750 mm, Na prodaju: Rabljena hidraulična preša 1000 tona 1000TONSKA PREŠA STRANI OKVIR Maksimalno TIP KAPACITET: 1000 tona PRITISAK: 175 kgf/cm² HOD: 1000 mm SVETLI OTVOR (DAYLIGHT): 1750 mm Guodpjucdgpsfx Ab Tok RADNA POVRŠINA STOLA: 2700mm x 1500mm KAPACITET POVRATKA KLIPA: 52,7 tona KAPACITET JASTUKA ZA ALAT (DIE CUSHION): 50 tona HOD JASTUKA ZA ALAT: 180 mm GLAVNI MOTOR: 415V, 50Hz, 6p, 110 kW KAPACITET REZERVOARA ULJA: 1800L

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Double-column press, 20-ton capacity a) Closing speed up to 10 mm/sec b) Opening speed up to 30 mm/sec c) Table size between columns: 1400x1100 mm d) Ram size between columns: 1400x1100 mm e) Manual lubrication (via grease nipples) Godpfxshmbhqo Ab Tjuk f) UKF recirculating-cooling-filtration system (electric cooling) g) Pressure setting from 4 T to 20 T (adjustable via rotary knob) h) Stroke adjustment via sliding control Design Press type: Double-column press, hydraulic Thermally neutral: 80–120°C Number of operator sides: 1 side Forces Pressing force max.: 200 kN Free return force max.: 20 kN Pressure build-up time (closed tool, steel-on-steel): max. 4 sec. Dimensions Max. opening width: 500 mm Stroke: 300 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 2,800 mm Minimum hall height: 3,500 mm Parallel deviation (at 20°C): #ERROR! mm Deflection Measured at max. closing force with 2/3 occupancy: ≤ 0.4 mm/m Weight Total weight of the press without operating fluids: approx. 3 t Table cut-out size: 1100x850 mm Speeds Rapid closing speed: 9 mm/sec Pressing speed: 9 mm/sec Sound pressure Sound pressure level, measured at 1.5 m height at control panel per DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press/travel cylinders: 2 pcs. Operating pressure: max. 280 bar Pressure build-up time (presses): 3–5 sec. Pressure accuracy during pressing stroke: +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 l/min Oil volume: approx. HLP 46 D 150 liters Ambient temperature: max. 40°C Oil temperature: max. 55°C Flow temperature: °C Cooling circulation pump ACS approx. 6.5 l/min Electrical Main supply: 400 V AC Control voltage: 24 V Frequency: 50 Hz Hydraulic motor connection: Main motor 3 kW Total connected load: approx. 5 kW

Stanje: dober (rabljeno), Leto izdelave: 1971, stiskalna sila: 630 t, Manufacturer: Sack & Kiesselbach Gjdpfx Aewxw Amsb Tsuk Model: EP 630 Operating principle: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid down speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrical connection: 550 V / 60 Hz Specifications subject to verification.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Hydraulic 400-ton column press suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Accumulator with approx. 4 nitrogen bottles e) Table size (clamping area): 2700 x 1700 mm (front view, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer specification Godog Iihwspfx Ab Tjuk h) Table, ram, and press head are stress-relieved annealed i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping area 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 mm (floor area) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light curtains 14 mm on front and rear sides p) Recirculating oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision-milled s) Side-monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m away from the press u) Pressure adjustment from 50 to to 400 to (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programming mode, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swiveling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted bb) Installation, commissioning, and training available at extra cost The hydraulics of the presses we offer are completely assembled using components from BOSCH-REXROTH/Parker/HAWE. Only components (SIEMENS) that are readily available in Germany are used in the control cabinet. All safety equipment, except the light curtains, is supplied by SICK. The control system is supplied by SIEMENS (S7 1500) including the 15-inch touchscreen monitor. The SIEMENS remote maintenance unit SECOME-Ethernet is included in the scope of delivery. SPECIAL FEATURE: Our design, featuring two press cylinders and the accumulator, allows full performance with a main motor of just 90 kW. Please refer to section 1.3 for technical details. Technical Data Design Type of press: Column press Thermally neutral: 80 – 120°C Number of operator sides: 2 Forces Press force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions – intended minimum tool height: 600 mm Max. opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 tons Speeds (see attached cycle diagram) Rapid closing: 100 - 450 mm/s Pressing speed at F max.:

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Pressing force: 400 t Stroke: 900 mm Table size: 1200 x 1200 mm Drawing cushion: 150 t Drawing cushion stroke: 280 mm Guedpfofh Izmox Ab Tok Shut height: 1100 mm