Hidravlične dvostebrične preše in štiristebrične preše nakup rabljenega (310)

Stanje: rabljeno, Leto izdelave: 1997, Druck 500 t Ständerweite 1550 mm Hub 600 mm Gedjvuk T Ejpfx Ab Teca Entfernung Tisch/Stößel, gr. Hub oben, Verst. oben 900 mm Tischfläche 1200 x 1300 mm Ziehkissendruck im Tisch 250 t Ziehkissenhub im Tisch 150 mm Ziehkissenfläche 950 x 950 mm Tischhöhe über Flur 1245 mm seitlicher Ständerdurchgang 1250 mm Stößelfläche 1200 x 1300 mm Geschwindigkeit ab 750 mm/s Geschwindigkeit auf 780 mm/s Arbeitsgeschwindigkeit 105 mm/s Ölinhalt 4000 l Antriebsleistung 263,0 kW Gewicht 45,0 t Raumbedarf (BxTxH) 3,3 x 3,3 x 6,1 m Höhe über Flur 6,1 m Baujahr 1978 - Überholung 1997 Für Handeinlegearbeiten zugelassen gemäß den deutschen Unfallverhütungsvorschriften (UVV) mit ölhydraulischem Antrieb, hydraulischem Ziehkissen im Tisch, pneumatischem Auswerfer im Stößel (0,5 t), Schnittschlagdämpfung mit Stanzhubbegrenzung (motorisch verstellbar), mechanische Stößelverriegelung im OT wie steht und liegt, OHNE in Betrieb nehmen

Stanje: rabljeno, Double-column Hydraulic Press NEFF Type RHS 125 Z Hydraulic Drawing Press Machine no. 3973 Year of manufacture: 1983 Pressing force: 125 tons Column spacing: 1,050 mm Lateral column opening: 550 mm Table surface: 1,000 x 800 mm Ram surface: 1,000 x 800 mm Ram stroke: 350 mm Max. installation height: 750 mm Table height above floor: 960 mm Blank holder force: approx. 12 tons at 105 bar Blank holder stroke: 100 mm Table opening diameter: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid return speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1,000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Hydraulic blank holder under the table with bore through the table plate Ø 202 mm - Precise 4-column guidance system on ram corners Gedpfx Aeguvtlob Tjca - Infinitely variable pressing force adjustment - Adjustable fixed stop, electrically controlled via hydraulic motor - Cutting stroke damping - Two-hand control panel for ram stroke activation on the press - Free-standing control cabinet (1,600 x 500 mm) - Documentation available, including operating manual, electrical diagrams, and PLC program printout Space requirement (L x W x H): 2,600 x 2,400 x 4,270 mm Weight: approx. 14 tons In good condition

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to top of table 900 mm Installation height: 600 mm Speeds: Advance 120 mm/sec, Pressing 13 - 4 mm/sec, Return 170 mm/sec Pump capacity: 103 L/min (REXROTH axial piston pump) Motor: 22 kW - 1500 rpm Dimensions (LxWxH): 2000 x 3200 x 4300 mm Weight approx.: 10,000 kg Oil filling: 700 L Hydraulic double-column press 250 t KK Kletzer Capacity: 250 Tonnes (at 245 BAR) Operation: Via key switch - Manual/setup mode with two-hand operation, without light curtain - Automatic mode with two-hand operation, full speed with light curtain Main cylinder: Ø 350 mm Auxiliary cylinders: 2 pcs. Ø 80 x 60 mm Motor: 22 kW – 45 hp Pump: 103 L/min REXROTH – axial piston pump Speed: Advance 120 mm/sec, Pressing 13 – 4 mm/sec, Return 170 mm/sec Clear opening: 1100 mm Table plate: 1000 x 1000 mm, T-slotted Ram plate: 1000 x 1000 mm, T-slotted & spring welds Gjdpfjgta Rcox Ab Tjca Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 900 mm (floor to top of table) Hydraulics: - Block & valves (REXROTH) (hydraulic accessories mounted on top of press) - Pre-fill valve - Hydraulic & mechanical ram safety - Pressure adjustment via PLC (min. pressure 35 t) - Speed adjustment via PLC - Pressure holding valve for 600 sec. - Air cooler (temperature adjusted via screen) - Automatic lubrication for guides (adjustable via screen) - Sides of working area enclosed with sheet metal - Guide rails for parallelism - Auxiliary motors: 5.5 kW + 2.2 kW - Auxiliary pumps: 22 cc + 5.5 cc - Safety railing around hydraulics and side ladder - Oil tank: 800 liters - Oil quantity: approx. 700 liters Control system: - SIEMENS S7-1200 - Main switch cabinet - Movable control panel - Soft starter for motor - Safety PLC: SICK - PLC display 9’’ Siemens - Two-hand operation (movable) - Linear scale for stroke adjustment 450 mm – NOVOTECHNIK - Light sensor front & rear of working area – SICK 900 + 150 mm - SECOME & Ethernet connection for remote maintenance – Siemens - Dual workspace lighting - 8 free I/Os on PLC - Automatic pressure compensation for oil loss Documentation: - Operating manual in German - Hydraulic circuit diagrams - Control schematics The price stated is approximate, as steel prices are subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, Pressing force: max. 1,250 t Clear width: 585 mm Godpswuutbjfx Ab Tsca Installation height: max. 480 mm Stroke: max. 355 mm Weight: 7,200 kg

Stanje: dober (rabljeno), Manufacturer: MÜLLER Gcsdpjn D Eiajfx Ab Tsa Model: SDZ 63t Table size: 620 x 500 mm Pressing force: 63 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna višina: 6.000 mm, vgradna višina: 1.000 mm, skupna širina: 2.400 mm, skupna dolžina: 3.500 mm, stiskalna sila: 500 t, širina mize: 1.500 mm, dolžina mize: 2.000 mm, skupna masa: 45.000 kg, kapaciteta rezervoarja za olje: 1.200 l, Oprema: varnostna svetlobna zapora, HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Trial Press for Toolmaking and Forming Technology This machine is a tryout/trial press for tools in the areas of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. The press features a 4-column design, a spacious working area, and a hydraulic system equipped with REXROTH pump technology. Control is via SIEMENS S7-1200 with touch panel and extensive parameterization options. Scope of delivery & accessories: - GÜTHLE die sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roller block / carrier console 10 t (GÜTHLE) - 4-channel die mounting system (length 1500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer’s documentation Machine condition: - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electrics in good condition - Mechanically sound, no visible damage - Machine remains installed and can be demonstrated under power Press force: - Rated force: 500 t - Max. pressing force at 250 bar: approx. 510 t Dimensions & Weight: - Overall dimensions approx.: 3500 × 2400 × 6000 mm - Total weight: approx. 45,000 kg Working area: - Table area: 2000 × 1500 mm - Column spacing (inside): 2000 × 900 mm - Installation height: 1000 mm - Stroke: 800 mm (linearly adjustable via linear measuring system) - T-slots available (receptacles customer-defined) Hydraulic system: Main Cylinder(s): - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary/Plan Cylinder(s): - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank: - Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min - Hydraulic tank: 1200 L - Oil system: 1000 L capacity Speeds: - Approach speed: 120 mm/s - Return speed: 150 mm/s - Working/pressure stroke: 12 mm/s Control & Safety: Gsdex D Tv Djpfx Ab Teca - Control: SIEMENS S7-1200 + ET200S - Schneider Electric 12" touch panel - Operating modes: • Two-hand automatic • Setup mode • Single stroke • Stroke without die cushion • Deep-drawing mode with die cushion - Measuring & safety components: • Novatechnik linear measuring system (63 bit) for ram & die cushion • SICK light barriers front and rear (height: 1050 mm) • Side safety fences with end switch - Remote maintenance via Ethernet possible - Mobile operator console International note block (DE/EN): German: Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide devices, personnel, or loading assistance. Pickup only by prior arrangement. English: Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony / Germany

Stanje: rabljeno, Leto izdelave: 1998, Pressing force 3500 t Stroke 900 mm Distance between table and ram, stroke down 1000 mm Distance between table and ram, stroke up 1900 mm Table size 3150 x 2150 mm Ram size 3150 x 2150 mm Max. total tool weight 30.0 t Max. upper tool weight 20.0 t Speed from 400 mm/s Working speed 0.9 – 9.2 mm/s Hydraulic operating pressure 280 bar Oil capacity 5500 l Rated current 760 A Voltage 400 V Frequency 50 Hz Drive power 425 kW Weight 231.0 t Hydroforming press / IHU press / Internal high-pressure forming press Maximum preforming force approx. 1000 t Total tool weight approx. 30 t Upper tool weight approx. 20 t · Tool function interface: 4 controlled axes, 3 ON/OFF functions ram, 4 ON/OFF functions table · Parallelism control: along the longitudinal side of the press · Light curtain: front and rear · Light barrier: left and right side · Ram locking in upper position · Two-hand operation panel: 1 · Independent high-pressure water hydraulic circuit: 2 · Max. operating pressure: 3,000 bar Gcjdpfx Asvuukhjb Tsa · Displaced volume per pressure intensifier: 3.74 l · 2 filling pumps: volume and pressure dependent on the power network · Location of pressure intensifier: to be determined · Main pumps: located on the press head/oil tank · Tool changing table: 6.7 x 2.15 m · Max. tool size: 3.15 x 2.15 m · Hydraulic tool clamping at ram · Mechanical tool clamping at table · Electrical control: Schuler Multiview HF Note: This machine is an EU re-import! If the machine is to be installed and operated within the EU, it must be retrofitted to comply with the currently valid EU regulations of the country of installation before commissioning. These works are not included in the offer price. As is, ex location, WITHOUT commissioning, disassembled and stored

Leto izdelave: 1984, Stanje: rabljeno, Pressure 100 t Column width 1000 mm Stroke 150 mm Table area 1000 x 700 mm Distance table/ram 500 mm Gcjdpofn Apzjfx Ab Tsa Blankholder stroke 180 mm Ram area 1000 x 700 mm Ram boreholes x depth 50 mm Strokes per minute 85 spm Pin hole (depth x diameter) 85 x 50 mm T-slots 22 DIN 650 design: diagonal Number of T-slots 2 Sheet width 400 mm Sheet length 1000 mm Required floor space approx. 3.0 x 3.0 x 3.0 m Machine weight approx. 8 t Total power requirement 30.2 kW - Fine stroke adjustment - Shear stroke damping - Oil extraction - 2 cylinders - Roller feed by Dreher, type WAV, control PMS3000 by Dreher - Soundproof cabin - Machine was overhauled in 2001 and fitted with new SIEMENS SIMATIC OP17 control system

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to upper edge of table top 850 mm Installation height: 600 mm Speeds: Approach 120 mm/s, Pressing 13 - 4 mm/s, Return 170 mm/s Output: 65 L/min (REXROTH axial piston pump) Motor: 15 kW – 1500 RPM Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1500 kN (150 tons – at 245 BAR) Operating Mode Selection: Via key switch - Manual / setup mode via two-hand operation without light curtain safety on front (always active at rear) - Automatic via two-hand operation at full speed (with active light curtain safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 RPM (IE-3) Pump: 45 cc – 65 L/min – REXROTH axial piston pump Speeds: Approach 120 mm/s – Pressing: 13 – 4 mm/s – Return 170 mm/s Clear width: 1300 mm Worktable: 1200 x 800 x 90 mm – with T-slots Ram plate: 1200 x 800 x 600 mm – with T-slots & ribbed reinforcement Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to upper edge of table top) Hydraulics: (Hydraulic accessories mounted on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety Mechanical ram safety for upper dead center position Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control System: Main control cabinet (mounted laterally to press frame) Swiveling control panel SIEMENS S7-1200 KTP 9” SIEMENS touchscreen (language selection DE/ENG) Safety PLC (SICK) Light curtain for front & rear of working area (SICK 750 + 150 mm) Soft starter Movable two-hand control SECOMEA Ethernet connection Linear encoder for stroke adjustment (450 mm – NOVOTECHNIK 16 bit) Work area lighting (2x, IP66) Gcodpfjmpfwdex Ab Tea - 8 free I/O ports at PLC for external connections ----- - Safety rail around hydraulic unit - Side access ladder ----- Documentation: Operator manual GERMAN (1x paper, 1x USB), Hydraulic & control diagrams Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2400 x 2100 x 4100 mm Total weight: approx. 11,000 kg Paintwork: frame RAL 7035 light grey

Stanje: rabljeno, Double Column Hydraulic Press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Distance between columns: 550 mm Lateral column clearance: 150 mm Table area: 480 x 380 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid advance speed: approx. 130 mm/sec. Working speed: approx. 20 mm/sec. Return speed: approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Infinitely variable pressing force adjustment - Rapid approach and working stroke - Stroke limitation dependent on pressure or position - Adjustable pressure holding time, extended pressing time 0.5–6 s - Mechanically adjustable fixed stop via handwheel on the ram - Safety light curtain SICK, Type LVU - Stroke counter Gcodpfx Abov Srfws Tja - Double column guidance on the ram Required space (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Stanje: dober (rabljeno), Leto izdelave: 1990, skupna višina: 7.200 mm, skupna širina: 4.200 mm, skupna dolžina: 14.500 mm, globina grla: 700 mm, Dolžina upogibanja: 14.000 mm Razmak med okvirji: 10.500 mm Krmiljenje: CYBELEC CNC 7000 z grafiko Širina mize: 1.000 mm Razdalja miza - pritisni nosilec min./maks.: 1.800 mm Gedpfx Abjx Ehnwo Teca Krmiljene osi: Y1; Y2; X1; X2 Krmiljenje je bilo obnovljeno leta 2012 Skupna potrebna moč: 75 kW Teža stroja pribl. min.: 465 t Prostorske zahteve pribl.: 14.600 x 4.200 x 7.200 mm Dodatne informacije - Razdalja miza/pritisni nosilec: 1.800 mm

Stanje: rabljeno, Leto izdelave: 1978, Pressure: 800 t Upright distance: 3010 mm Stroke: 300 mm Distance table/ram, large stroke up, adjustment up: 1350 mm Table surface: 3000 x 1800 mm Table height above floor: 500 mm Lateral frame passage: 1500 x 1400 mm Ram area: 3000 x 1800 mm Speed from: 300 mm/s Oil capacity: 900 l Height above floor: 5.4 m Height below floor: 2.1 m Drive power: 200.0 kW Weight: 80.0 t Space requirement (WxDxH): 5.2 x 2.6 x 7.5 m Hydraulic high-speed press Gcsdpfx Asvuk Ipob Tsa With oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic cutting stroke damping, mechanical depth stop (motorized adjustment), ram locking in upper dead center Maximum stroke frequency: 50/min (when using automatic feed systems) As-is and as it lies, NOT commissioned, dismantled and stored

Leto izdelave: 1981, Stanje: rabljeno, Pressure: 40 t Column clearance: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Draw cushion hydraulic pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Gedpfx Aob U Hw Tjb Teca Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid approach speed steplessly adjustable up to 240 mm/s

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Gjdod Aca Aopfx Ab Tsca Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Working table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: rabljeno, Leto izdelave: 1996, Tlak 100 t Razmak stebrov 1525 mm Hod 450 mm Razdalja med mizo in batom, pri največjem hodu zgoraj, zgoraj nastavljivo 850 mm Površina mize 1500 x 1150 mm Pritisk vlečne blazine v mizi 30 t Hod vlečne blazine v mizi 150 mm Višina mize nad tlemi 940 mm Stranski prehod med stebri 480 mm Površina bata 1500 x 1150 mm Vsebina olja 1200 l Teža 25,0 t Gcsdpevuufxefx Ab Tea Zahtevan prostor (ŠxGxV) 4,2 x 1,75 x 5,1 m Svetlobna zapora Sick Dovoljeno za ročno polnjenje v skladu s CE standardom z oljno-hidravličnim pogonom, hidravlično vlečno blazino / izmetalcem v mizi, hidravličnim izmetalcem v batu, hidravlično blažilko udarca, mehanskim globinskim omejevalnikom ni potrebna temeljna jama 2025 – v izdelavi: nova krmilna in varnostna elektronika – Siemens S7-1500F, udobno upravljanje preko zaslona na dotik Video pri prodajalcu na voljo pred demontažo

Leto izdelave: 1980, Stanje: rabljeno, Pressure 100 t Stand width - mm Stroke 350 mm Table dimensions 1150 x 700 mm Total power requirement 11 kW Machine weight approx. t Space requirement approx. m with cutting stroke damping and drawing cushion Machine without control cabinet Gjdpfxodlxcto Ab Tsca

Stanje: rabljeno, Leto izdelave: 1977, Druck 250 t Ständerweite 930 mm Hub 200 mm Entfernung Tisch/Stößel, Hub oben 600 mm Tischfläche 900 x 860 mm Ziehkissenkraft 100 t Ziehkissenhub 50 mm Ziehkissenfläche 350 x 400 mm Tischhöhe über Flur 950 mm seitlicher Ständerdurchgang 380 x 380 mm Stößelfläche 850 x 700 mm Geschwindigkeit ab 400 mm/s Gcjdpfx Abevuk Tre Tsa Geschwindigkeit auf 400 mm/s Arbeitsgeschwindigkeit 30 mm/s Ölinhalt 350 l Antriebsleistung 45,0 kW Gewicht 11,5 t Raumbedarf (BxTxH) 2,0 x 1,2 x 3,4 m Nur zugelassen für sicheres Werkzeug oder feste Abschirmung gemäß den deutschen Unfallverhütungsvorschriften (UVV) mit ölhydraulischem Antrieb, druck/zeit- und wegabhängig steuerbar, hydraulischem Ziehkissen im Tisch, mechanischer Stanzhubbegrenzung mit hydraulischer Dämpfung keine Fundamentgrube erforderlich wie steht und liegt, OHNE in Betrieb nehmen / OHNE weitere Arbeiten

Stanje: rabljeno, Leto izdelave: 1987, Druck 65 t Ständerweite 930 mm Hub 1100 mm Entfernung Tisch/Stößel, Hub oben 1300 mm Tischfläche 1340x1084 mm Durchfallöffnung im Tisch 604 x 404 mm Tischhöhe über Flur 1000 mm seitlicher Ständerdurchgang 705 mm Stößelfläche 1230 x 990 mm Geschwindigkeit ab 620 mm/s Geschwindigkeit auf 207 mm/s Arbeitsgeschwindigkeit 320 mm/s Ölinhalt 450 l Antriebsleistung 15,5 kW Gewicht 8,0 t Raumbedarf (BxTxH) 2,8 x 2,6 x 4,85 m hydraulische Schnellhub-Entgratpresse für Druckgussteile mit ölhydraulischem Antrieb, hydraulischen Seitenschiebern (4x), hydraulischem Niederhalter im UT / Auswerfer im OT im Stößel, Absacksicherung / Stößelverriegelung Tischfläche 1340 x 705 mm oder 930 x 1084 mm Stößelfläche 1230 x 705 mm oder 930 x 990 mm Gjdpfovuk Szox Ab Tsca Einlegeplatte mit Durchfallöfnung 320 x 260 mm wie steht und liegt, OHNE in Betrieb nehmen / OHNE weitere Arbeiten

Stanje: rabljeno, Leto izdelave: 1998, Tlak 63 t Razdalja med stebri 1000 mm Hod 300 mm Razdalja miza/bate, največji hod zgoraj, nastavljivo zgoraj 850 mm Gcsdovzxrvopfx Ab Toa Površina mize 980 x 500 mm Višina mize nad tlemi 850 mm Površina bata 130 mm Hitrost dol 400 mm/s Hitrost gor 461 mm/s Delovna hitrost 14 - 97 mm/s Pogon 15,0 kW Teža 5,0 t Dimenzije (ŠxGxV) 2,0 x 1,6 x 3,9 m Z oljno-hidravličnim pogonom, tlakom nadzorovan, mehanska globinska omejitev Temeljna jama ni potrebna Stanje kot stoji in leži, BREZ zagona

Stanje: rabljeno, Leto izdelave: 1979, Pressure 18 t Diameter 250 mm Stroke 150 mm Throat depth 210 mm Max. distance table to ram 400 mm Drive power 5.5 kW Machine weight approx. 1.1 t Gjdpfx Abjvzxp Is Toca Space requirement approx. 1.0 x 1.0 x 1.8 m Hydraulic press with oil-hydraulic drive, pressure/time controlled As is, not commissioned Price for commissioning (in current condition) on request

Stanje: rabljeno, Leto izdelave: 1991, Tlak 150 t Širina između stupova 300 mm Hod 180 mm Udaljenost stol/klip, veliki hod gore, gornji položaj podešen 300 mm Površina stola 570x180 / 300x410 mm Visina stola iznad poda 875 mm Gcsdpfx Abovuuiws Toa Bočni prolaz između stupova 180 mm Površina klipa 180 mm Brzina dolje 250 mm/s Brzina gore 160 mm/s Radna brzina 6 - 12 mm/s Kapacitet ulja 250 l Snaga pogona 11,0 kW Težina 2,4 t Dimenzije (ŠxDxV) 1,3 x 1,3 x 2,4 m Godina proizvodnje 1972 - Rekonstrukcija/renovacija 1991 Odobreno za ručno umetanje prema njemačkim propisima o sigurnosti na radu (UVV § 20) s elektro-hidrauličkim pogonom Nije potrebna temeljna jama Stanje kako stoji i leži, BEZ puštanja u rad Cijena puštanja u rad (u zatečenom stanju) na upit

Stanje: rabljeno, Leto izdelave: 2011, Pressure: 120 t Column gap: 430 mm Stroke: 125 mm Distance table/ram, stroke up: 400 mm Table size: 430 x 450 mm Table height above floor: 860 mm Lateral column clearance: 230 mm Ram area: 250 mm Working speed: 10 mm/s Drive power: 11.0 kW Weight: 2.5 t Space requirement (W x D x H): 1.6 x 1.3 x 2.4 m Year of manufacture: 1974 - Overhauled in 2011 Approved for manual loading operations according to CE standard With oil-hydraulic drive, movable guard, two-hand and foot control No foundation pit required Can be inspected under power at our warehouse Gjdpevuuhtjfx Ab Tsca

Stanje: rabljeno, Leto izdelave: 1982, Tlak 200 t Prečna razdalja 2030 mm Hod 550 mm Razdalja med mizo in batom, zgornji hod 1800 mm Površina mize 2000 x 2800 mm Višina mize nad tlemi 760 mm Površina bata 2000 x 2000 mm Stranski prehod pri stojalu 2000 mm Hitrost od 400 mm/s Gcedpfx Asvuk Hlob Tja Pogona moč 51,0 kW Teža 33,0 t Prostorska zahteva (ŠxGxV) 3,25 x 3,5 x 5,4 m Višina nad tlemi 5,4 m Samo odobreno za varna orodja ali fiksno zaščito v skladu z nemško Uredbo o preprečevanju nezgod (UVV) hidravlična robilna stiskalnica z oljnim hidravličnim pogonom, krmiljenje odvisno od tlaka in hoda, hidravlično zaklepanje bata ni potrebna temeljna jama v stanju, kot je, brez zagona / brez dodatnih del

Stanje: rabljeno, Leto izdelave: 1990, Pressure 500 t Clearance between uprights 1220 mm Stroke 600 mm Distance table/ram, max. stroke up, adjustment up 1000 mm Table surface 1600 x 1200 mm Cushion force in table 320 t Cushion stroke in table 150 mm Cushion area in table 750 x 625 mm Cushion force in ram 180 t Cushion stroke in ram 100 mm Gedpfovut Tbsx Ab Toca Cushion area in ram 750 x 625 mm Ram area 1600 x 1200 mm Table height above floor 800 mm Downward speed 665 mm/s Upward speed 530 mm/s Working speed 34 - 100 mm/s Oil quantity 2000 l Drive power 180.0 kW Weight 40.0 t Required space (WxDxH) 3.2 x 2.4 x 7.5 m Foundation pit depth 4.1 m Height above floor 5.55 m Year of manufacture 1978 - Overhaul 1990 Approved for manual loading according to German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic cushion in table and ram Foundation pit depth approx. 4.1 m As is, without commissioning

Stanje: rabljeno, Leto izdelave: 1979, Pressing force: 1000 t Upright distance: 3030 mm Stroke: 350 mm Distance between table and ram, with large stroke at top, adjustment at top: 1400 mm Table surface: 3000 x 2000 mm Table height above floor: 430 mm Lateral frame passage: 1450 x 1400 mm Ram surface: 3000 x 2000 mm Downward speed: from 300 mm/s Upward speed: 340 mm/s Working speed: 18 – 44 mm/s Gcedpfx Abjvuk I Ae Toa Return force: 120 t Oil capacity: 4400 l Width with platform: 4950 mm Drive power: 2 x 90.0 + 10.0 kW Weight: 87.0 t Required floor space (W x D x H): 4.35 x 3.65 x 7.55 m Height above floor: 6.05 m Height below floor: 1.5 m Approved for hand-fed operation according to German accident prevention regulations (UVV) with electro-hydraulic drive, pressure/time and position dependent control, adjustable speed, ram lock, two-hand control Partially disassembled and stored – as is, without commissioning