Priklopnik z premičnim dnom in potisnim dnom nakup rabljenega (189)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2012, Leto izdelave: 2012, Oprema: ABS,

Stanje: rabljeno, največja dovoljena obremenitev: 28.000 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, Oprema: ABS, Legras SBS 2220 Moving Floor Trailer 90 m³ * SAF axles * 90 m³ loading volume * Disc brakes * Lifting axle on the 1st axle * Air suspension * Pneumatic control * Load pressure gauge * Rolling tarpaulin * Side underrun protection tarpaulin * Folding fender for lighting system Fsdpfxjwx Uvws Aa Hogk * LED lights * ADR-compliant wiring * Maintenance hatch front left * ABS connector * 2 x 7-pin power connectors * ISO air couplings with red and yellow coupling heads * Toolbox * Access ladder and platform at front bulkhead * Double wing rear door * Maintenance hatch front left Subject to prior sale and errors excepted! Sale exclusively subject to our General Terms and Conditions (GTC). Important notice: Despite careful review of all details in our offer, errors may occur. In some cases, these may be caused by transmission errors within the platforms’ systems. Therefore, all information is provided without guarantee and does not constitute any legal claim. Legal information: This sales advertisement does not represent an offer in the sense of §145 of the German Civil Code (BGB). Rather, it serves as information for contract initiation. All details provided are without guarantee and do not represent warranted characteristics.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.435 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.690 mm, * JOST axles * Air suspension * Lift axle * Wabco SmartBoard * Storage box * Aluminum rims * Tarpaulin cover Fjdpfxjv Hlwie Aa Hsgk -----Internal vehicle number: 10290----Subject to errors and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 30.850 kg, skupna masa: 36 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, Leto izdelave: 2019, Oprema: ABS, Kraker CF-200 prikolica s premičnim dnom, ca. 92 m³, SAF osi, dvigljiva os, zračno vzmetenje, kolutne zavore, podest, rolo ponjava, daljinsko upravljanje, EBS, ABS Fedpfx Aajw U Iate Hegk

Stanje: rabljeno, največja dovoljena obremenitev: 34.070 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2024, naslednji pregled (TÜV): 02/2026, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, Oprema: ABS, Our full vehicle inventory, including vehicles available for immediate or short-term delivery, can be found on our website. Extract from the equipment list. Full specification available on request. Vehicle * The trailer is built on a self-supporting chassis made of high-quality S700 steel * The frame runs from the landing legs to the rear * 2-inch kingpin, mounted on an approx. 10 mm thick saddle plate St 52-3 * Saddle plates for max. fifth wheel load 15,000 kg Axles * 3 x 9 t Knapen HD axles, rigid, with approx. 430 mm disc brakes, 10 studs ET 120 * Standard control panel with pressure gauges and suspension controls, positioned left in front of the axles * First axle is a lift axle, fully automatic via EBS, incl. start aid (3x brakes) * Remote control Tyres and Rims * 6 x steel rims * 6 x tyres 385/65 R22.5 Mounted parts * Steel landing legs with tiltable base, max. static load: 50 t, max. lifting load: 24 t * 6 x semi-circular mudguards * Anti-spray mats mounted behind the 3rd axle * Standard lighting board + cover flap * Rear end carrier * Fixed splash guard underneath the bumper * Bumper according to R58-03. Height approx. 375 mm, ground clearance approx. 450 mm * Plastic toolbox with lower hinge, dimensions approx. 1,000 x 500 x 500 mm, positioned left rear of axles * Aluminium side underrun protection, open design, foldable according to EEC regulations Fodpewqlg Rsfx Aa Hjgk * One long ladder, mounted behind the side underrun protection or under the trailer * One extendable ladder with platform for easy entry, mounted on the rear of the trailer * 2 wheel chocks, position: 2x left * Broom and shovel holder, mounted right in front of the axles Floor * CARGOFLOOR CF 500 SL-C system * The CARGOFLOOR system is equipped with E-Control * Smooth aluminium floor boards, approx. 10 mm, 21 boards * The floor boards are equipped with aluminium end caps * Stainless steel plate mounted at the rear underside for additional wear protection Front wall * The largest platform on the market is mounted on the front wall * 2 ladders on the front wall, positioned left and right * A door is mounted in the front wall for easy access to the front of the trailer, position: left – opens outwards Moving partition wall * For complete emptying, the trailer is equipped with an aluminium moving partition wall, with a brush to prevent contamination of the guide rails * Ground clearance approx. 100 mm Side walls * Extra-strong top rail profile with tracks for the moving partition wall * Top rail profile with notch for the keder rope of the sliding tarpaulin * The side walls consist of approx. 3 mm inner side and approx. 2 mm outer side * The side walls are continuously welded over the full height (inside) for maximum strength and minimal contamination * Welding is performed via a high-quality, fully automated welding process * Incl. side protective tarpaulin left side Rear * The rear doors are fully welded from wall and frame profiles for extra strength * Doors are equipped with a pneumatic safety lock for safe unloading * Through-loading height with closed top rail at rear approx. 2,665 mm * Single heavy-duty stainless steel locking bar per rear door Top rail * Steel top rail with wedge Roof bows * 4 pieces

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1941, lastna masa: 7.480 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2011, naslednji pregled (TÜV): 10/2024, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.770 mm, prostornina tovornega prostora: 93 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, barva: srebrn, Leto izdelave: 2011, Oprema: ABS, H & W moving floor, Cargo Floor system, lift axle, sliding tarpaulin, platform, foldable rear light protection, moving bulkhead with service door, German semi-trailer. Sale only to commercial customers and under exclusion of any warranty. We deliver to any German seaport. Fjdpfxeq T Iuyj Aa Hogk

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2011, Oprema: ABS,

Stanje: rabljeno, največja dovoljena obremenitev: 28.150 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2008, naslednji pregled (TÜV): 09/2025, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 91 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, KRAKER CF-200 moving floor, approx. 91 cbm, Cargo Floor base with 21 planks, 8 mm, stainless steel wear plate at the rear under the moving floor, fully emptying function (sliding front wall), push/pull function, radio remote control for floor operation, load pressure gauge, double-wing rear door with locking bar, access ladder and standing platform at the front of the body, sliding tarpaulin, foldable bar above the doors, storage box on the left behind the axles, ABS, EBS, BPW EcoPlus axle(s), lift axle, disc brake system, support winches, air suspension. Vehicle may have advertising decals/applied lettering. Fgodpfx Aaswdc Eko Hjk Our offer is generally without new TÜV (German roadworthiness test) certification. If a new TÜV inspection is desired, we are happy to provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering applied. Our general delivery and payment terms apply. We are also happy to provide you with a financing or leasing offer for this item. Please contact us!

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2008, * Lift axle * Tarpaulin cover * Toolbox Fjdpfevtk Efox Aa Hsgk * Air suspension * Disc brakes * SAF axles * Tare weight: 7,700 kg -----Internal vehicle number: 9695----Errors & prior sale excepted.

Stanje: rabljeno, največja dovoljena obremenitev: 28.100 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, Oprema: ABS, * Kraker 3-osni premični talni polpriklopnik CF-200 * cca 92 m³ * 10 mm tla * Zračno vzmetenje * Kolutne zavore * Wabco Smart Board * SAF osi * Aluminijasta platišča Fgjdjw S Swwopfx Aa Hek * Podest * Navijalna cerada * Dvižna os * Daljinsko upravljanje * EBS * ABS

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminium construction with corresponding reinforcements in the lower chord for particularly high stability and strength, aggregation chassis made of aluminium, 140 mm frame height! (max. 39t) Axles and Suspension "Disc Brakes 22.5" Jost axle assemblies 3 x 9 tonnes with DC air suspension, raising/lowering function, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tyre pressure monitoring with ZF rim-mounted sensors. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 as per manufacturer selection, Alcoa aluminium rims DuraBright-11, 75x22.5 ET 120, Kingpin bolted into a 10 mm thick plate. Landing Gear Fgedpfxofakkcj Aa Hjk Aluminium drop leg landing gears, 2 x 10 t support load, with swivelling feet for air suspension. Brake System According to E.G. standards, two-line braking system, Wabco EBS electronic brake system with RSS (Roll Stability Support), spring-loaded brake system acting on two axles, operated at the rear, aluminium air reservoirs, premium modulator. Electrical System In accordance with German road traffic regulations (StVZO), with 2 Aspöck Europoint LED five-chamber tail lamps integrated in aluminium rear panel, 24-volt system with 1x 5-pin and 2x 7-pin sockets, with side marker lights in LED design, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from the outside. Body/Tipper Body "Fully Welded Inner Structure" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn. Aluminium tipper body, side walls made of 30 mm thick aluminium plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm aluminium crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminium front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special aluminium corner profiles in bevelled design, smooth rear wall in straight design with 2 aluminium swing doors 50/30 mm thick with 4 locking rods in a welded aluminium rear frame mounted with Teflon and stainless steel bearings, synchronically suspended aluminium sidewall in reinforced top chord with Kevlar curtain for full emptying, side brush seals and additional Kevlar side curtain, integrated discharge hopper with foldable cover plate at lower left rear, externally operable, inspection window rear left, 1 sample slide valve per rear door (2 pcs), service door front left. Hydraulics "Cargo Floor moving floor system in the floor with hydraulically actuated aluminium profiles on aluminium square profiles mounted on approx. 670 PE-HD sliders, approx. 6 mm floor thickness, hydraulic stroke approx. 200 mm, fixed half couplings at the front wall, separate hydraulic line connection option under the vehicle with fixed half couplings, line size NW 21, fixed half couplings with to-be-specified size and design, operating pressure 190 up to max. 240 bar, aluminium end pieces welded into the floor, electronic control at rear left with cable remote control in a lockable waterproof box. Accessories PVC mudguards with rubber flaps, aluminium spare wheel carrier, foldable side aluminium underrun protection

Stanje: rabljeno, lastna masa: 7.950 kg, največja dovoljena obremenitev: 31.050 kg, skupna masa: 39.000 kg, prva registracija: 10/2024, prostornina tovornega prostora: 93 m³, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, drsna vrata, elektronski program stabilnosti (ESP), Knapen Schubbodenauflieger 92 m³ Volumen * Leergewicht ca. 7.950 kg * Abmessungen innen (L x B x H): 13,53 x 2,48 x 2,69/2,79 m * Hecktüren mit Edelstahlverschlussstangen und Sicherung * Mitlaufende Trennwand * ABS/EBS * 1 x Liftachse * Alcoa-Aluminiumfelgen * 10 mm Cargofloor * 1-Zoll-Adpro-Anschluss * LED-Lichtanlage * Zusätzliche LED-Rückfahrscheinwerfer Fgsdpjwrfaasfx Aa Hok * Knapen-Achsen * Bereifung: 385/65R22,5 Sehr guter Zustand! Deutsches Fahrzeug! Auch zur Vermietung! Knapen Walking Floor Trailer, volume 92 m³ * Empty weight approx. 7,950 kg * Internal dimensions (L x W x H): 13.53 x 2.48 x 2.69/2.79 m * Rear doors with stainless steel locking rods and safety latch * Mobile partition wall * ABS/EBS * 1 x lift axle * Alcoa aluminum rims * 10 mm cargo floor * 1-inch Adpro connection * LED lighting system * Additional LED reversing lights * Knapen axles * Tires: 385/65R22.5 Very good condition! German vehicle! Available for rental! Remorque à fond mouvant Knapen, volume 92 m³ * Poids à vide env. 7 950 kg * Dimensions intérieures (L x l x H) : 13,53 x 2,48 x 2,69/2,79 m * Portes arrière avec barres de verrouillage en inox et sécurité * Cloison mobile * ABS/EBS * 1 x essieu relevable * Jantes aluminium Alcoa * Plancher mobile 10 mm * Raccord 1 pouce Adpro * Système d'éclairage LED * Feux de recul LED supplémentaires * Essieux Knapen * Pneus : 385/65R22,5 Très bon état ! Véhicule allemand ! Disponible à la location !

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2012, Oprema: ABS, Lift axle Fsdpfordtihox Aa Hsgk

Stanje: rabljeno, največja dovoljena obremenitev: 33.320 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2016, dolžina tovornega prostora: 13.530 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.780 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 3.977 mm, Oprema: ABS, STAS Moving Floor +/- 92 cbm, Cargo-Floor floor with 21 boards, 10 mm thick, hydraulic tailgate, hydraulic cover, stainless steel wear plate at the rear under the moving floor, extend/retract function, cable remote control, load pressure gauge, service door in front wall, access ladder and platform at front of superstructure, work lights, ABS, EBS, SAF Intra CD axle(s), disc brake system, aluminum drop supports, air suspension, Wabco SmartBoard. Vehicle may feature advertising stickers and/or lettering. Our offer generally does not include a new roadworthiness inspection (TÜV). If a new inspection is desired, we are happy to provide a quote from our partner workshops! Vehicle may be provided with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. Fodpfx Aaowcip He Hegk We are happy to create a customized financing or leasing offer for this unit. Please contact us!

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2003, * Lift axle * BPW axles * Conveyor belt * Walking floor * Tarpaulin cover * Metering roller * Unladen weight: 9,860 kg ----Internal vehicle number: 9815----Subject to errors and prior sale. Fsdpsvyxzbofx Aa Hjgk

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, Oprema: ABS, Hello! We are pleased to welcome you to our company. We hereby offer you the following vehicle with the listed specifications: Please be sure to leave your telephone number in your message! * First registration: 30.03.2015 * Permissible total weight: 39,000 kg * Empty weight: 8,300 kg * Payload: 30,700 kg * Model: C03S * Overall length: approx. 14.40 meters * Overall width: approx. 2.55 meters * Overall height: approx. 4 meters * Moving wall Fodpfxot Hccrs Aa Hegk * SAF axles * Tyres: 385/55R22.5 Our services: - New TÜV (MOT) and emissions inspection - Nationwide delivery within Germany - Test drives available at any time - Attractive financing conditions - Trade-in of your existing vehicle Appointments also available on Sundays by prior arrangement.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Fodpjgcw Rmjfx Aa Hegk Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: rabljeno, največja dovoljena obremenitev: 27.570 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2020, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.708 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, KNAPEN K 200 moving floor trailer, approx. 92 cbm, "Cargo-Floor" floor with 21 boards (10 mm), front service door, stainless steel wear plate at rear under moving floor, wear plates at the end of floorboards and on side wall (3000x2000 mm), complete emptying (sliding front wall), equipped with cable winch, extend/retract function, KNAPEN V2 radio remote control (for floor, lift axle, work lights, hydraulic tailgate), load pressure gauge, access and standing platform at front of upper structure, roll tarp, bumper with towing eye, oil temperature protection, oil cooler, 3x reinforced refuse bows, ALCOA Durabright aluminum rims, ABS, EBS, SAF INTRA CD axle(s), disc brake system, 1st axle is a lift axle, rear steering axle, air suspension with lift/lower function, aluminum drop legs, LED work lights: at the landing legs, behind the rearmost axle, and in the body, 30-liter water tank, reversing camera, stainless steel toolbox. Vehicle may have advertising decals and/or lettering. Our offer generally does not include new TÜV inspection. Should a new TÜV inspection be required, we would be happy to provide an offer from our partner workshops! Vehicle may have advertising decals and/or lettering. Our general delivery and payment terms apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us! Fgodpfx Ajvnp Uhoa Hsk

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvigalna os Fsdpew Rit Tsfx Aa Hogk * ALU platišča * JOST ose * Drsna ponjava * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Fgsdpfxjfi Nmpe Aa Hek Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: rabljeno, največja dovoljena obremenitev: 28.350 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2020, naslednji pregled (TÜV): 05/2025, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Schwarzmüller moving floor trailer, approx. 92 cbm capacity, Cargo Floor with 21 x 10 mm planks, stainless steel wear plate at the rear under the moving floor, infeed and outfeed function, double wing doors at rear with locking bar, loading manometer, sliding tarpaulin, access ladder and standing platform at the front of the body, complete discharge (sliding front wall), folding rear light guards, ABS, EBS, SAF INTRA CD axle(s), disc brakes, lift axle, air suspension with raising/lowering function, "Jost" landing gears. Vehicle may have advertising stickers and/or lettering. Our offer generally does not include a new roadworthiness (TÜV) inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. Fodpfjv Nuh Nsx Aa Hogk We will gladly prepare a financing or leasing offer for this item. Please contact us!

Stanje: rabljeno, največja dovoljena obremenitev: 33.880 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, naslednji pregled (TÜV): 11/2024, dolžina tovornega prostora: 13.425 mm, širina tovornega prostora: 2.502 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Lift axle * Tarpaulin cover * Storage box * Air suspension * Disc brakes * SAF axles Fgsdpfx Ajwy Hd Nja Hek * Unladen weight: 8,120 kg ----Internal vehicle number 11142-----Subject to errors & prior sale

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Fgjdpfx Aajgcw Rij Hok Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: rabljeno, največja dovoljena obremenitev: 27.968 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2019, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.695 mm, prostornina tovornega prostora: 90 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, KNAPEN K 100 moving floor trailer, approx. 90 cbm, fifth wheel height approx. 1,250 mm, "Cargo-Floor" floor with 21 planks (10 mm), stainless steel wear plate at rear under moving floor, complete emptying with moving front wall, insert/retract function, KNAPEN V1 radio remote control for floor, lift axle & work lights, 13 lashing rings per side, service door at front, loading pressure gauge, double-wing rear door with rotary bar lock, access ladder & standing platform at front body, side wall protection tarpaulin, floor protection tarpaulin, roll tarp, ABS, EBS, aluminium rims, BPW Eco Air HD axle(s), disc brake system, 1st axle - lift axle, air suspension with raising/lowering device, landing gear, 2x storage boxes. Vehicle may have advertising decals and/or lettering. Fsdpjvnpy Dsfx Aa Hogk Our offer generally does not include new TÜV inspection. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! Vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to offer you a financing or leasing quote for this item. Please contact us!

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Fedpfx Asfi Nmwea Hsgk Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection