ZMS Żeleźniki

Stanje: rabljeno, Leto izdelave: 2007,

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen,

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22012A, hitrost vretena (min.): 200 obr/min, največja hitrost vretena: 10.000 obr/min, skupna višina: 2.200 mm, skupna dolžina: 9.000 mm, skupna širina: 1.500 mm, skupna masa: 5.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: SERIES 32-i MODEL B, hitrost proti vretena (min.): 200 obr/min, največja hitrost protivretena: 10.000 obr/min,

Stanje: rabljeno, Leto izdelave: 2001, Standardni stroj Gujdpsx Hxyvofx Ab Tjk

Stanje: rabljeno, Leto izdelave: 2012, MAL VEČKASETNI AVTOMATSKI NALAGALEC Gsdsx Hxyispfx Ab Tsuk Agfa Azura CX 125 čistilna enota ON-LINE AGFA ELANTRIX 125 x ZLAGALNIK ZA PLOŠČE

Stanje: rabljeno, Leto izdelave: 2006, sesalna zmogljivost: 10.300 m³/h, negativen tlak: 4.400 Pa, Odvod prahu, odsesovalec varilnega dima, samodejni patron filtrirni sistem, pnevmatski, vakuumski, primeren za plazmo, laser, peskanje, sodo peskanje, gritanje in vse vrste suhega prahu. Znamka: ESTA Model: DUSTEX F-126 Gujdpfxox Hxycj Ab Tsk Filter se med delovanjem čisti s pulzi stisnjenega zraka, kar zagotavlja visoko učinkovitost naprave. Ventilator je na čisti strani, kar zmanjšuje tveganje za eksplozijo na minimum. Tehnični podatki: Maksimalna zmogljivost – 10.300 m³/h Maksimalni podtlak – 4.400 Pa Površina filtracije – 126 m² Patronski filtri – 6 kos Motor z močjo 7,5 kW Premer priključka – 315 mm Dimenzije naprave: Višina – 3,70 m Širina – 2,00 m x 1,35 m Osnova – 1,45 m x 1,02 m Skladiščna številka: 1095

Stanje: rabljeno, Leto izdelave: 2014, Format papirja: maks. 900 x 358 mm // Format papirja min. 210 x 140 mm Papirna teža maks. 400 g/m² // Papirna teža min. 100 g/m² Število utorov na list: 9 Maks. število zgibov na list: 2 Število pomnilniških programskih mest: več kot 1.000 Min. razdalja med dvema utoroma: 40 mm Min. razdalja med dvema zgiboma: 70 mm Min. razdalja utora od sprednjega roba lista: 50 mm Guodpfxsx Hxxrj Ab Tok Min. razdalja zgiba od sprednjega roba lista: 50 mm Min. razdalja utora od zadnjega roba lista: 50 mm Min. razdalja zgiba od zadnjega roba lista: 50 mm Dolžina zgiba: 70 mm Maksimalna dolžina zgiba do 450 mm (avtomatski podajalnik) Do 1.800 mm (ročno podajanje) Natančno nastavljanje v korakih po 0,1 mm Maks. hitrost (A4): 6.000 listov/uro Dimenzije (D x Š x V): 1.980 x 655 x 1.265 mm Teža: 190 kg Električni priklop: 230 V.

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main Spindle - Technology: Belt-driven spindle - Speed: 12,000 rpm - Power: 4 kW - Torque: 7 Nm - Bar capacity: 12 mm - Z1 travel: 50 mm - Workpiece clamping: Collet chuck Sub Spindle - Technology: Belt-driven spindle - Speed: 12,000 rpm - Power: 4 kW - Torque: 7 Nm - X3/Z4 travel: 222/139 mm - Rapid traverse in X3/Z4: 15 m/min - Workpiece clamping: Collet chuck Tool Carrier I (X/Y) - Technology: Turret with 6 stations (fully powered) - Tool holder: Ø25 mm - Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm - X1/Y1 travel: 35/37.5 mm - Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) - Technology: Turret with 6 stations (fully powered) - Tool holder: Ø25 mm - Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm - X2/Z2 travel: 35/50 mm - Rapid traverse in X2/Z2: 15 m/min Front Attachment - Number of stations: 4 - Tool holder: Ø28 mm - Pitch: 32 mm - Tool drive: 12,000 rpm, 4 kW, 7 Nm Gsdpfx Aox Hxv Deb Tsuk - Number of driven stations: 4 - X3/Z3 travel: 222/139 mm - Rapid traverse in X3/Z3: 15 m/min Rear Attachment - Number of stations: 4 - Tool holder: Ø28 mm - Pitch: 32 mm - Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm - Number of driven stations: 4 - X4 travel: 39 mm - Rapid traverse in X4: 15 m/min MACHINE DETAILS - CNC Control: Mitsubishi TX-8i - Max turning diameter: 50 mm - Year of manufacture: 2007 Dimensions - Spindle center height above floor: 1,050 mm - L x W x H: 1,450 x 1,098 x 1,700 mm - L x W x H with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weights - Weight with electrical cabinet (max. configuration): 2,000 kg - Weight without electrical cabinet (max. configuration): 1,600 kg - Weight with electrical cabinet (min. configuration): 1,200 kg - Weight without electrical cabinet (min. configuration): 850 kg EQUIPMENT - Chip management: Chip conveyor - Coolant management: Coolant pump - Raw material feed: Bar feeder, FMB minimag 3200 - Finished parts discharge: Workpiece discharge unit (tube) - Emulsion mist extraction: Interface mechanically prepared - Tool holders: Various fixed holders - Additional equipment: Rinsing gun

Stanje: rabljeno, Leto izdelave: 2011, Program Guedpex Hxvdofx Ab Tjk Fotocelice

Stanje: dober (rabljeno), Leto izdelave: 2000, DECKEL MAHO DMU 125 P hi-dyn 5-Axis Universal Machining Center with Equipment Year of manufacture: 2000 Control: HEIDENHAIN TNC430 Machine number: 11180000233 Travel distances: X – 1,250 mm / Y – 880 mm / Z – 800 mm B-axis: infinitely variable C-axis: indexing, degrees: 360º (0.001) Feed rates: 40 m/min Rapid traverse: 40 m/min Equipment: NC milling/rotary table 1,250 mm x 1,000 mm Max. workpiece weight: 2,000 kg Spindle: SK40, speed up to 12,000 rpm Tool changer for 30 tools Coolant system, tank capacity 600 l Electronic handwheel Chip conveyor Internal coolant supply Rotating inspection window Rinsing gun Gedpfsx Hxu Hjx Ab Tjuk HEIDENHAIN probe Paper band filter Scope of supply includes: Comprehensive tool holders, some fitted with tools Hydraulic machine vice Support table Operating manual/documentation Machine parameters on storage medium For equipment, technical data and transport, see PDF. Images, content and specifications are non-binding and subject to change. All other accessories shown in the photos and video are not included and do not form part of this sale. The scope of supply only includes accessories explicitly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier Truck) D-04654 Frohburg Packaging only Delivery: immediately Subject to prior sale / Payment due immediately upon purchase

Stanje: rabljeno, Leto izdelave: 2007, Peč za kaljenje stekla GMC FOR GLASS INDUSTRY THF 150300S - 2007 Gjdpfx Abjx Hxuts Touk 1500x3000 mm 210x75 mm 2,8-19 mm 16380x5000 mm 400 V Krmilna omara – 2 kosa Računalnik z monitorjem, miško, tipkovnico Dodatni računalnik Valjčna miza 3500x1550 mm – 2 kosa

Stanje: rabljeno, prevoženi kilometri: 134.920 km, moč: 110 kW (149,56 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 4x4, medosna razdalja: 3.400 mm, prva registracija: 08/2020, kapaciteta rezervoarja za gorivo: 70 l, Izpusti CO₂: 239 g/km, emisijski razred: Euro 6, barva: bela, število sedežev: 2, Leto izdelave: 2020, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), greljenje sedeža, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, računalnik na krovu, sistem za imobilizacijo, spojka prikolice, tempomat, = Additional Options and Equipment = - Android Auto - Apple CarPlay - Attention Assist - Heated Exterior Mirrors - Passenger Airbag - Bluetooth Hands-free Kit - Differential Lock - Front Electric Windows - Electrically Adjustable Exterior Mirrors - Euro 6 - Driver Airbag - Remote Central Locking - Hill Hold Control - Wooden Load Bed - Height-Adjustable Steering Wheel - Boot Lid - Cornering Lights - Front Centre Armrest - Multimedia Capability - Fog Lights - Radio - Reversing Camera - Rear Wiper - Right-Side Sliding Door - Driver's Seat Heating - Start/Stop System - Immobilizer - Partition Wall = Further Information = General Information Number of Doors: 5 Model Range: Sept. 2019 - Dec. 2022 Model Code: T6.1 Cab: Single Technical Information Torque: 340 Nm Number of Cylinders: 4 Engine Displacement: 1,968 cc Transmission: 7-speed Automatic Top Speed: 179 km/h Dimensions Length/Height: L2H1 Dimensions (L x W x H): 530 x 190 x 199 cm Weights Kerb Weight: 2,086 kg Payload: 1,114 kg gVW: 3,200 kg Max. Towing Capacity: 2,500 kg (unbraked 750 kg) Guedpsx Hxt Nefx Ab Tsk Interior Interior: Black Fuel Consumption Average Fuel Consumption: 7.1 l/100km Service, History, and Condition MOT (Roadworthiness Test): valid until 11/2026 Number of Keys: 2 (2 remote transmitters) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2021, skupna dolžina: 14.040 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: drugo, velikost pnevmatike: 385/65R22.5, medosna razdalja: 9.060 mm, barva: siv, Leto izdelave: 2021, Konfiguracija osi Dimenzija pnevmatik: 385/65R22.5 Znamka osi: BPW Zavore: kolutne zavore Zadnja os 1: aluminijasta platišča; dvižna os; največja osna obremenitev: 9.000 kg; profil pnevmatike levo: 60 %; profil pnevmatike desno: 60 %; vzmetenje: hidravlično vzmetenje Zadnja os 2: aluminijasta platišča; največja osna obremenitev: 9.000 kg; profil pnevmatike levo: 50 %; profil pnevmatike desno: 50 %; vzmetenje: zračno vzmetenje Zadnja os 3: aluminijasta platišča; dvižna os; največja osna obremenitev: 9.000 kg; profil pnevmatike levo: 60 %; profil pnevmatike desno: 60 %; vzmetenje: zračno vzmetenje Teže Lastna teža: 7.550 kg Nosilnost: 34.450 kg Dovoljena skupna masa: 42.000 kg Godpfex Hxr Sox Ab Touk Vzdrževanje Tehnični pregled veljaven do: 05.2026 Identifikacija Registrska številka: OS-92-NR Dodatne informacije Za več informacij se obrnite na Marka van der Steena ali Boba Beukersa.

Stanje: dober (rabljeno), Nujno napajanje, pretvornik toka, napajalnik, omrežni napajalnik, stikalno napajanje, nujno napajanje za pisarno -Proizvajalec: LADS, nujno napajanje za pisarno -Tip: H2000 -Napetost: 220 V 50/60 Hz -Moč: 2000VA/1200W -Količina: 1 kos na voljo -Cena: na kos Gsdpex Hxrxjfx Ab Touk -Dimenzije: 220/130/V60 mm -Teža: 11 kg

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 440 h, nosilnost: 350 kg, dvižna višina: 13.700 mm, vrsta goriva: električni, Leto izdelave: 2018 Lastna teža: 3.260 kg Gsdox Hxrfspfx Ab Tjuk Največja dovoljena masa: 3.610 kg Dimenzije (D x Š x V): 248 x 119 x 195 cm Delovna višina: 1.370 cm

Stanje: rabljeno, dvižna višina: 5.020 mm, Leto izdelave: 2019, obratovalne ure: 5.010 h, Leto izdelave: 2019 Namen uporabe: Gradbeništvo Lastna teža: 8.300 kg Mere (D x Š x V): 583 x 230 x 271 cm Godex Hxq Uspfx Ab Teuk

Stanje: rabljeno, Leto izdelave: 2008, Manufacturer: Kolbus / Cermi • Model: XCR 650 Gsdsx Hxq Ispfx Ab Teuk • Machine type: Front-cut / front trimming unit for flap or brochure production • Application area: Print finishing / book and brochure manufacturing • Function: – Collating channel with feed and alignment of brochures – Opening of inserted flaps – Front cut: precise front trim for processing flap brochures – Automatic feeding and stacking of finished products • Possible applications: – Processing of flap brochures and similar print products – Inline integration in finishing or binding lines – Can also be used as a stand-alone machine • Format range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Output: – Mechanical capacity depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible • Features: – Precise front trimming for demanding brochure formats – Suitable for inline production lines – Robust industrial-grade construction • Typical industries: print finishing, bookbinding, printing plants

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 350 h, nosilnost: 350 kg, dvižna višina: 13.700 mm, vrsta goriva: električni, Leto izdelave: 2018 Lastna teža: 3.221 kg Guodex Hxqzspfx Ab Tek Dovoljena skupna teža: 3.571 kg Dimenzije (D x Š x V): 248 x 119 x 254 cm Delovna višina: 1.370 cm

Stanje: rabljeno, Leto izdelave: 2007, Equipment – KBA Rapida 105U-4 + L FEEDER / FEEDER SYSTEM Gedpfx Absx Hxn He Teuk • Antistatic devices – standard equipment in the feeder PRINTING UNIT • Pneumatic folder device • Differential drive in dampening units • Baldwin cylinder washing device • Cardboard core version – impression cylinder washing device • Cardboard core version – blanket washing device • Ink roller cooling for wet offset (individual devices) PERIPHERY • Manual plate punch – Planeta (780 mm punch spacing) • Initial supply of printing aids AIR SUPPLY • Cabinet for compressor installation, non-regulated, incl. exhaust hood COATING TECHNOLOGY • Coating tower with chamber doctor blade (Harris & Bruno) and pneumatic coating pumps • Coating supply and cleaning unit • Extended delivery 2600 mm • Additional anilox roller • ACS – Air Cleaning System • Coating cylinder with quick-clamp system for coating plates • Rapid-Dry V IR hot-air dryer • Stack thermometer • Dryer operation via central control desk OPERA / SOFTWARE • CIPLink software (installation CD) • Computer to be supplied by the customer

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 352.532 km, moč: 330 kW (448,67 KM), prva registracija: 07/2021, vrsta goriva: dizel, konfiguracija osi: 6x2, velikost pnevmatike: 315/70R22,5, gorivo: dizel, medosna razdalja: 5.950 mm, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, širina tovornega prostora: 2.500 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.800 mm, Leto izdelave: 2021, Oprema: ABS, dvižna zadnja plošča, filter saj, klimatska naprava, nizka raven hrupa, parkirni grelec, računalnik na krovu, spojka prikolice, tempomat, = Additional Options and Equipment = - Adaptive cruise control - Airbags - Aluminium fuel tank - Heated mirrors - Bluetooth - Electric windows - Electrically adjustable exterior mirrors - Remote central locking - Enclosed cab - Speed limiter - Cab - Air conditioning - Power steering - Air suspension - Air-suspended seats - Air horn - Metallic paint - Fog lights - Particulate filter - Disc brakes - Sleeper cab - Sun visor - Auxiliary heater - Central locking - Towing jaw = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Drivetrain AdBlue system: Yes Fuel tank: 400 litres Transmission Gearbox: 12-speed, automatic Axle Configuration Tyre size: 315/70R22.5 Front axle: Max. axle load: 7,500 kg; Steering; Axle brand: MICHELIN XMULTI; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 1: Max. axle load: 11,500 kg; Axle brand: MICHELIN XMULTIWAY; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Axle brand: MICHELIN XMULTI; Tyre tread left: 70%; Tyre tread right: 70% Dimensions Dimensions (L x W): 980 x 255 cm Weights Unladen weight: 11,850 kg Payload: 14,150 kg Guodpfx Abox Hxlfj Tek Gross vehicle weight: 26,000 kg Functional Tail lift: DHOLLANDIA, underrun lift, 2,000 kg Loading platform height: 100 cm Condition Technical condition: very good Visual condition: very good Further Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for further information. = Company Information =

Stanje: rabljeno, Leto izdelave: 2012, Mori Seiki NTX2000/1500SZ 5-osni rezkalni/sučno stroj z upravljanjem MAPPS/F31iB5, največji premer nihanja obdelovanca 660 mm, največji premer nihanja nad prečnim suportom 660 mm, največji premer struženja 610 mm, največja dolžina struženja 1540 mm, zmogljivost obdelave palice 65 mm, pomiki X/Y/Z/X2/Z2 = 495/250/1560/160/1402 mm, glavno vreteno Kitagawa z 8'' vpenjalno glavo pri 5.000 vrt./min, pomožno vreteno Kitagawa z 8'' vpenjalno glavo pri 5.000 vrt./min, 76-pozicijski avtomatski izmenjevalec orodij, stožec vretena Capto C6 pri 12.000 vrt./min, visokotlačno hlajenje, 10-pozicijski indeksni revolver, transporter za odrezke, teža stroja 15.000 kg, dimenzije (DxŠxV) 4076 x 2890 x 2626 mm (2012) Lokacija: Naprave se nahajajo v Tamworthu, Združeno kraljestvo. Na lokaciji ni nakladalnih zmogljivosti, razstavljanje in nakladanje sta strošek kupca. Vsa/katerekoli orodja so ponujena kot posebej opisana. Gusdsx Hxk Uepfx Ab Tek

Stanje: zelo dobro (rabljeno), Weiss Model: WK11-1000/40 For sale: Professional climatic test chamber Weiss Umwelttechnik WT-WK 1000/40 with integrated Zander K-MT 2 steam humidifier unit. The unit is suitable for precise temperature and humidity testing of components, assemblies, and devices. Ideal for industrial applications, development, quality assurance, and research. Weiss climatic test chamber, water-cooled Temperature testing data: Temperature range: -40°C to +180°C Temporal temperature fluctuation in center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate: Heating: 4 K/min Cooling: 3 K/min Climate testing data: Temperature range: +10°C to +95°C Humidity range: 10 to 98 %rH Temporal temperature fluctuation in center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation in center of usable space: ± 1 to ± 3 %rH Heat compensation: In range +25°C to +95°C At up to 90% relative humidity: 500 W Humidification system data: Reservoir volume: 20 l Water quality: demineralized pH value: 6 to 7 Conductivity: 5 to 20 μS/cm3 Water consumption At constant +40°C, 92 %rH: 21/24 h Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber capacity: approx. 990 liters Rated voltage: 3/N / PE AC 400 V + 10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Gedpex Hxkzjfx Ab Tsuk Weight: 840 kg Important safety information for buyers! The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Leto izdelave: 2004, Stanje: potreben popravila (rabljeno), Os X: 800 mm // 900 mm/min Os Y: 600 mm // 900 mm/min Os Z: 400 mm // 900 mm/min U/V: 60 mm Obdelovanec: X: 1300 mm Obdelovanec: Y: 910 mm Obdelovanec: Z: 400 mm Gjdpfx Abox Hxiks Tjuk Največja obremenitev mize: 2300 KG Glavna električna povezava: 400 V / 50 HZ / 3P Skupna priključna moč: 10 KVA Tlak zraka: 6 bar Dielektrični rezervoar: 250 litrov Tehnične lastnosti Pomik Z: 400 mm Pomik X: 800 mm Pomik Y: 600 mm Približna masa: 4700 kg Približna postavitvena dimenzija (D x Š x V): 1950 x 2550 x 2000 mm. Ima navodila in dokumentacijo. Ni v delovanju; menimo, da je težava v napajanju. Mehansko stanje je zelo dobro.

Stanje: novo, Leto izdelave: 2021, Remorque à balles Godpfjx Hxhysx Ab Tjuk    • Poids total max. : 14 000 kg    • Capacité de charge : 10 560 kg    • Longueur sans cadre arrière extensible : 7 500 mm    • Longueur avec cadre arrière extensible : 7 750 mm    • Longueur avec cadre arrière allongé : 8 850 mm    • Largeur : 2 540 mm    • Largeur de la plateforme de chargement : 2 430 mm    • Hauteur : 2 590 mm    • Hauteur des ridelles : 1 335 mm    • Hauteur du plancher : 1 200 mm    • Voie : 1 900 mm    • Poids à vide : 3 440 kg    • Pneus : 500/50x17    • Frein à air    • Châssis galvanisé à double essieu avec ressorts à lames    • Garde-boues sur essieux avant et arrière    • Timon en V avec ressort de support réglé et œillet d’attelage fixe 50 mm    • Ridelles avant et arrière galvanisées    • Éclairage et réflecteurs    • Frein à main    • Crochets à corde    • Cadre arrière extensible mécaniquement de 1 mètre    • Homologué UE État : Neuf Année de fabrication : 2021

Stanje: dober (rabljeno), Leto izdelave: 1995, obratovalne ure: 43.499 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of manufacture: 1995; Year of delivery: 1998 Installation & commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer specifications / History Previous owner (1999–2022): German aerospace group Technical data Travel & Working Area X-axis (table longitudinal travel): 4,000 mm Y-axis (cross slide traverse): 2,500 mm Z-axis (ram vertical travel): 1,000 mm Distance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverse X/Y/Z: Feed 0–6,000 mm/min, Rapid 15,000 mm/min B-axis Rotary: 0–3,600 deg/min C-axis Rotary: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing regulation: max. 4,000 Nm Speed Range Level I: 20–875 rpm Level II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool Ø: 315 mm Tool Ø at full capacity: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Clearances Vertical spindle unit: spindle nose – table surface 250–1,250 mm Horizontal spindle unit: spindle centre – table surface 150–1,150 mm Rotary Nutator (MC303): spindle centre – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Gsdjx Hxdzepfx Ab Teuk Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Features & Accessories Fully automatic tool changer (ATC): 120 positions (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Tool cabinet + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with slide: 3,500 x 2,300 x H 2,670 mm Tool changer without slide: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Slide with ram: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool cabinet: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis gantry milling machine is ideally suited for the machining of steel, cast iron, and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 positions), fully automatic head changer, and high-precision B-/C-axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.