Kürz

Leto izdelave: 2014, Stanje: rabljeno, Število brusilnih agregatov: 6 kos Širina brušenja: 180 mm Gsdpfox Dng Dox Ab Teca Največja višina brušenja: 150 mm STAEHLE Brusilni stroj tip Gloria/Saturn E 180 RF ----- Stähle Hess finiš-brusilni stroj tip Saturn E 180 RF (prej Gloria) s 2 brusilnima agregatoma, dodatno zgoraj in spodaj Roto Finish brusilna naprava. 1 zgornji brusilni trak 1 spodnji brusilni trak 2 zgornji Roto-Finish brusilni napravi 2 spodnji Roto-Finish brusilni napravi Podrobnejši opis glejte priložen PDF proizvajalca. Prodaja po naročilu stranke. Slike so iz našega arhiva in so bile posnete pred izdobavo stroja stranki. (tehnični podatki po proizvajalcu – brez garancije!)

Leto izdelave: 2011, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt size: 420x1800 mm (please consult us for supply) Gcodox A Unxspfx Ab Tea MACHINE CONFIGURATION: - Roller table, underside belt processing Table height from floor: 90 cm - Automatic workpiece detection by sensor - Pneumatic pressure sanding pad - Automatic belt rotation direction change MACHINE FEATURES: - General power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeters for monitoring power consumption Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic roller tensioning, oscillation, and retraction - Pneumatic supply: 6 to 8 bars - Extraction, 2 lower outlets Ø150 mm Recommended airflow: 2200 m³/h Velocity: 20 m/s - CE marking, front/rear emergency stops, lockable isolator switch NOTE: For your satisfaction, we remind you that belts should be slackened when the machine is not in use and that any humidity, including dew point inside your premises during winter, should be avoided. Machine footprint: 1500x1300x2050 h.mm Weight: 1200 kg

Leto izdelave: 2022, Stanje: rabljeno, Number of sanding units: 6 pcs. Sanding width: 45-165 mm Sanding height max.: 45-92 mm Weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer Available for inspection in operation until 19.12.2025 ----- Long description as PDF attachment! Brief description: The machine is equipped with an automatic height detection system for material feed. It features 2 top sanding discs and 2 bottom sanding discs, each combined with a brushing unit. Godpfjxyafkjx Ab Teca Technical manufacturer’s description: Ecoline Q-Sand: the ideal sander for blocks and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, Q-Sand guarantees maximum precision and uniformity. It is equipped with sanding discs, flap brushes, and a double disc for more effective material removal, improving adhesion for subsequent treatments. Q-Sand can be installed in-line or used as a standalone machine thanks to its full operating autonomy. It is also ideal for window frames, beams, and custom products, optimizing processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine on request! ----- (technical data according to the manufacturer – no guarantee!) All specified prices are net, VAT not included.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, dolžina brusnega traku: 2.500 mm, širina brusilnega traku: 300 mm, višina brušenja: 150 mm, Dvojtrakovni brusilni stroj za les za brušenje okenskih okvirjev Gcsdpfxoxvtlpo Ab Toa

Leto izdelave: 2007, Stanje: rabljeno, Control system: Siemens 840D Grinding wheel diameter: 900 mm Workpiece - grinding width: 144 - 152 mm Workpiece - grinding dimension: 22 - 25 mm Speed at 24 m/s: 1,425 rpm Maximum circumferential speed: 25 m/sec Power output: 37 kW Total power requirement: 75 kW Weight: approx. 18.0 t Space requirement: approx. L 4.9 x W 4.9 x H 2.6 m In our opinion, the machine is in good used condition. Gcjdoxq Hkuopfx Ab Tsa Double-sided surface grinding machine The machine was used for the production of connecting rods. Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and information subject to change and error. Prior sale reserved!

Leto izdelave: 2008, Stanje: rabljeno, Number of sanding units: 8 pcs Sanding width: 150 mm Inspection possible while still in operation! Leistomat - Finish and Intermediate Sanding Machine Löwer LZ 8 ----- For finish sanding (smoothing, de-burring, and edge rounding) or intermediate sanding of profiled window bars - Finish and intermediate sanding machine with eight sanding flap units 2 top surface sanding units (co-rotating/counter-rotating) 2 bottom surface sanding units (co-rotating/counter-rotating) 4 profiled sanding units arranged diagonally (top right, bottom right, top left, bottom left – all counter-rotating) - Linear guidance of all sanding units via linear ball bearing sets on hardened shafts - Time-controlled plunging of all counter-rotating sanding units directly onto the incoming workpiece edges to avoid sanding through the primer at the end grain area. This allows the units to be set deeper into the profiles. - Time-controlled withdrawal of the co-rotating units - Motorised workpiece thickness adjustment of the machine via height adjustment by push-button - Digital display of workpiece thickness via state-of-the-art magnetic tape system - Variable speed control of sanding flaps via frequency converter to adapt sanding intensity to different primers (200–1000 rpm) - Automatic workpiece width detection at machine infeed with automatic adjustment of the left sanding units to current workpiece width - Profile selection via selector switch at the machine infeed and automatic adjustment of sanding flap units to selected profile - Modern PLC control system for easy machine operation - Extraction port: 5 x 100 mm diameter - Dimensions (Frame): Length x Width x Height (mm): 2600 x 1500 x 1600 - Total length: 3600 mm (including roller conveyor with integrated workpiece width detection) - Operating voltage: 400V, 50Hz, 3P, Air supply: 6 bar - CE compliant Technical Data: Number of sanding units: 8 pcs Max. surface brush width: 150 mm Max. working height: 100 mm Surface brush motor: 0.75 kW Gcsdpfx Aexpi D Ujb Tja Side brush motor: 0.37 kW Brush speed: 1380 rpm Feed motor: 1.1 kW Feed speed: 4–20 m/min, infinitely variable Sanding unit speed regulator Automatic width detection Digital magnetic tape measurement display Extraction nozzles: 5 x 100 mm Air requirement: 5 x 565 m³/h Minimum air velocity at machine connection: 20 m/s Dimensions: Length: 2600 mm Width: 1480 mm Height: 1700 mm Weight: 950 kg WITH infeed roller conveyor ----- Price for above configuration on request! The return conveyor shown in the photos is NO LONGER available and is NOT included in the scope of delivery. (Technical data according to manufacturer – subject to verification!)

Stanje: novo, Number of sanding units: 1 unit Sanding width: 150 mm Maximum sanding height: 150 mm Löwer Edge Finishing Machine MiniSpin N ----- Machines for finishing and intermediate sanding of edges and profiles with a sanding spindle, horizontal or vertical. Motor: 0.75 kW Spindle in vertical position for edge processing. Spindle in horizontal position, swivelled to the side, for processing longer profile strips or similar, or in combination with a combination sanding head for sanding edges with a sanding flap disc. Godpfoxmk Ayjx Ab Tjca Sanding head inclinable +/- 20° for processing angled edges. Working height / width: 150 mm Max. diameter roller / brush: < 300 mm Frequency inverter for stepless adjustment of spindle speed 200 - 800 rpm Table size: 400 x 800 mm Two selectable rotation directions Operating voltage: 110 / 240 V, 50 / 60 Hz Extraction connection: D=100 mm Weight approx. 100 kg Including grooved base body D=180, L=150 equipped with Smartflex sanding flaps CE-compliant version ----- Machine in above configuration available on request! ----- Special accessories at extra cost: Additional combination sanding head for MiniSpin N EUR 740.00 comprising a sanding disc D=180mm with 20 grooves and a sanding roller D=180mm L=75mm with 36 grooves, equipped with SmartFlex sanding flaps Combination sanding head for MiniSpin N instead of standard sanding head Surcharge: EUR 110.00 comprising a sanding disc D=180mm with 20 grooves and a sanding roller D=180mm L=75mm with 36 grooves, equipped with SmartFlex sanding flaps Additional standard sanding head EUR 630.00 D=180mm L=150mm, equipped with SmartFlex sanding flaps ----- (Technical data according to manufacturer – subject to change!)

Stanje: dober (rabljeno), Leto izdelave: 1996, obojestransko brušenje zgoraj-spodaj z brusilnim čevljem in prašno krtačo maks. širina brušenja 300 mm Gcsdpfxexfl Eao Ab Tja maks. višina brušenja 200 mm leto izdelave 1994 z oznako CE

Stanje: rabljeno, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS - GLORIA 2 BELT INDIVIDUAL WOOD SANDING MACHINE ----- Manufacturer’s Description: ----- Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features meet the requirements of the EC Machinery Directive, delivered with “dust-tested” certification. Offset sanding units equipped with large tension rollers for effective heat dissipation and stable abrasive belt tracking. Sanding units with forced sanding-belt oscillation. Dual-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt blow-off device increases belt life. Integrated, adjustable brush and finishing unit with large dust extraction via threaded spindle. Motorized thickness adjustment of the complete top unit using precision-threaded spindles and linear ball bearings mounted on hardened and ground precision shafts, with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe sized in a balanced ratio to abrasive grain load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding shoes (DBGM) provide excellent sliding properties, efficient heat dissipation and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt exchange using pneumatically controlled belt release. Option to adjust belt tracking during belt change. Electropneumatic pressure monitoring with visual fault indicator for compressed air supply. Automatic machine stop for belt breakage and with infeed guard including integrated wood thickness control. Visual indicator on the operator control panel. Feed system utilizes proven, calibrated, slip- and non-slip-resistant conveyor belts running over precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive ensures consistent wood transport. Infinitely variable feed speed. Chip removal adjustment (bottom) via precision-threaded spindle, with dial indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: top sanding and brushing unit, bottom sanding and brushing unit, workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Integrated control and operator panel within the machine housing, including lockable main switch. All motors electronically protected against overload. Technical Specifications: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Minimum workpiece length: 300 mm Feed speed: Infinitely variable 5–25 m/min Sanding belt dimensions: 200 mm wide x 1600 mm long Gjdpfx Ajv D Rg Dob Toca Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed motor: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000–2500 m³/h, 20–25 m/sec Extraction connection sockets: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment Gcodpfxovu Hgbs Ab Tsa - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: novo, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 2–180 mm LÖWER double-sided sanding machine DSM 2000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window timber, etc. Robust premium construction with long cast iron tables, brushing and finishing units, and conveyor belt feed. Suitable for high continuous loads, even with significant material removal. - Offset sanding and finishing units located above and below - Direct drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding with roller and pad for heavy stock removal with consistently flat engagement area - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Forced, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly on the sanding rollers, fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large-capacity dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-scale linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of stock removal below via precision lead screw with scale ring (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed safety device via contact roller in case of oversized workpieces - Workpiece transport via calibrated, slip-proof and adhesive conveyor belts over heavy-duty 1000 mm long cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and consistent workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the workpiece infeed side - Automatic workpiece thickness detection (no prior measurement necessary) - Digital thickness display (resolution 0.1 mm) using modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm Gcodpfjvu Hdtox Ab Tea - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE compliant ----- Base price of the machine on request! ----- Optional accessories for additional cost: Infinitely variable feed 4–20 m/min for speed adjustment to ...

Stanje: novo, Number of sanding units: 8 pcs Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L/W/H): 3065 x 1600 x 1900 mm Machine weight: approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, defibering, and edge rounding) or intermediate sanding of profiled window bars. Featuring Softdisc technology for visible surfaces and automatic profile and width adjustment. - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - 1 upper Softdisc unit Ø=200 mm, 0.75 kW - 1 upper lamella roller unit L=200 mm, 0.75 kW - 1 lower Softdisc unit Ø=200 mm, 0.75 kW - 1 lower lamella roller unit L=200 mm, 0.75 kW - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units on linear ball bearing sets with hardened shafts - Timed immersion of all lamella roller units directly above the incoming workpiece edges. Immersion allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable lamella roller speed via frequency inverter to adjust sanding intensity (separately for discs, surface rollers, and side rollers) - Disc units as Softdisc with hook-and-loop backing for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belt and spring-loaded pressure rollers, continuously variable speed 4-15 m/min - Parameters adjustable via touch panel: workpiece thickness, workpiece width (left lateral units individually), immersion depth of lateral units, spindle speed, feed rate - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width and profile recognition, as well as automatic positioning of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically indexed powered feed roller, automatic clamping of workpiece, feed after unit adjustment - Red/green signal lights indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with return processing) - Workpiece height: 12-160 mm - Extraction connection: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blow-off directly at the discs - Length (housing) x width x height (mm): 3065 x 1600 x 1900 - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400 V, 50 Hz, 3-phase, air supply: 6 bar - CE-compliant version ----- Price of the above-mentioned machine on request! ----- Special accessories at extra charge: Set of replacement lamella strips for Leistomat SD-200, comprising: Surface units: - 30 strips EH45 / 200 - 7 (rollers) - 30 strips EH45 / 200 - 20 (rollers) Rebate units: - 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid, with 30 slots, 50 mm long Set of replacement lamella strips for SmartFlex lamella disc, comprising: - 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc - D=200 mm, grit 220, with velour backing (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc - D=200 mm, grit 280, with velour backing (hook-and-loop), pack of 100 pcs. ----- Gsdpfx Aovnv Uhsb Toca ...

Stanje: novo, Number of sanding units: 4 units Sanding width: 190 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece sanding machine for sanding solid wood, such as window profiles etc. Extremely robust top-class design with innovative features. Suitable for high continuous loads, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below: 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fibre brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precise dimensional accuracy - External cooling of sanding zones for cooler sanding and longer sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Efficient sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorised sanding thickness adjustment via precision lead screws and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom) via precision lead screw with scale ring and indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinders with constant tension - Rapid sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip-resistant conveyor belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, even workpiece feed - Feed gearbox motor with stepless speed control, 4-20 m/min - All motors electrically fused - Ergonomically arranged control elements - Digital thickness indicator (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each, 0.37 kW - Extraction nozzles: 2 x 180 mm, 2 x 120 mm - Extraction airspeed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Approx. weight: 3300 kg - Operating voltage: 400 V, 50 Hz, 3 phase - CE version ----- Price for the above-mentioned machine available upon request! ----- Gsdpfovnv Tqsx Ab Teca Optional accessories at extra cost: Workpiece air-blow cleaning - Arranged with nozzles above and below at the machine outfeed, pneumatically controlled Sanding belt air-blow cleaning (4-belt) - Arranged with nozzles directly at the radius of the tension rollers inside the extraction unit, timer-controlled on/off, each 5...

Leto izdelave: 1986, Stanje: zelo dobro (rabljeno), For sale: Reckmann LM 161 profile grinding machine. The machine is in very good condition and has seen little use. Godsuyg Rnepfx Ab Teca

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Gcjdpfxet Tqy Ej Ab Tsa Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Leto izdelave: 2001, Stanje: dober (rabljeno), Table diameter 200 mm Workpiece height 100 mm Number of wheels 1 Control unit Robot CNC Total power requirement 6 kW Machine weight approx. 1.8 t Installation dimensions approx. 1.83 x 2.04 x 2.1 m Technical Specifications - Grinding capacity: Ø 0.025–12.7 [mm] - Bar diameter: Ø 1.0–12.7 [mm] - Grinding length: W15 (optionally W20) Gedjtt Tb Djpfx Ab Teca - Z-axis: 35 [mm], resolution: 0.5 [µm] - X-axis: 25 [mm], resolution: 0.1 µm - Y-axis: 286 [mm], resolution: 0.5 µm - U-axis: 15 [mm], resolution: 0.1 µm Head motor: 0.70 [kW], rotation speed: 300–3000 [rpm] Rough grinding: 1.5 [kW] spindle, Ø 60 [mm], grinding wheel diameter: Ø 200 [mm], cutting speed: 30 m/sec. Finishing: 0.75 [kW] spindle, Ø 100 [mm], grinding wheel diameter: Ø 150 [mm], adjustable cutting speed Dimensions (L x W x H): 1830 x 2040 x 2100 mm Weight: approx. 1800 [kg] Accessories - Loading and unloading robot - Fire protection system CONTROL Axes: 4 axes + 2 programmable robot axes - Simultaneous linear interpolation of 4 axes + cylindrical interpolation of 2 robot axes