Schreinerei und Küchenwerkstatt

Stanje: rabljeno, Leto izdelave: 2024, Exhibition machine Garbsen, new, complete in standard version, featuring: - Sturdy, torsion-resistant frame made of steel, using welded and bolted construction - Upper lamellar pressing beam with 6 elements, side lamellar pressing beam with 5 elements - Lamellar pressing beams with proven tolerance compensation (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are made of 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam Gsdpexy Tl Dofx Ab Touk - Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased pitch and radial accuracy) and high-performance travel nuts with grease reservoir - Pressing is performed electromotively, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressing beams is infinitely adjustable electronically via 2 potentiometers and regulated by frequency converters, making the press force control completely wear-free - Pressing force for horizontal pressing beam: min. 500 daN (kg) to infinitely max. 2200 daN (kg) - Pressing force for vertical pressing beam: min. 300 daN (kg) to infinitely max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second - Very simple operation via 6 separate push buttons, 8 motion sequences selectable through the control system - Freely adjustable preselection for pressing time with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500 x 1200 x 2300 mm (L x W x H) Picture including special accessory: machine feet Surcharge for rapid traverse speed per unit for fast positioning of the pressing beams, controlled by automatic workpiece recognition with sensors in the pressing beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing of special parts Set of machine feet for working height 500 mm per unit Location: Garbsen

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, LAMINATE – CABINET PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-free steel frame in welded and bolted design - Upper lamella pressing beam with 6 elements, lateral lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (System Ganner) for tightly compressed cabinet joints - Counter-pressure surfaces (side pressure plate, base) are 38 mm thick, coated, continuous support panels - Continuous pressing area with 95 mm height on the lower vertical pressing beam - Electromotor-driven adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and runout precision) and high-performance traversing nuts with grease reservoir - Pressing operation by electric motor, via 2 separate worm-gear motors (2 x 0.75 kW) - The pressing force of the beams is continuously electronically adjustable with 2 potentiometers and controlled via frequency inverters, making the press force regulation completely wear-free - Press force for horizontal pressing beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Guodpfxsxvitij Ab Tek Press force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/sec - Very simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine no. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Thoroughly overhauled by Ganner, 6 months parts warranty Location: ex-stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 1989, Delovne dimenzije 3000 x 1250 x 650 mm Hod cilindra 110 mm Godpfxoxu Egvo Ab Tsuk Dimenzije stroja 3240 x 2120 x 770 mm Teža cca 900 kg

Stanje: rabljeno, Leto izdelave: 1993, rabljeno, vrhunsko stanje Proizvajalec: Hess Tip: Express Leto izdelave: 1993 Strojna št.: 100914/28 Število cilindrov na stiskalni element: 2 – hod 110 mm Število stiskalnih elementov vodoravno: 3 Število stiskalnih elementov navpično: 3 Delovna širina: 2500 mm Delovna višina: 1350 mm Globina stiskanja: 600 mm pnevmatsko Električna nastavitev višine Potrebni prostor pribl. 3600 x 800 x 2450 mm Teža pribl. 1200 kg Skladišče: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v dejanskem stanju, kot je bilo ogledano, Gedpfx Absxuv N Uo Teuk brez garancije ali jamstva

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 941, delovna višina: 1.350 mm, delovna širina: 600 mm, delovna dolžina: 2.500 mm, TEHNIČNE PODROBNOSTI Dolžina stiskanja: maks. 2.500 mm Višina stiskanja: maks. 1.350 mm Delovna globina: maks. 600 mm PODROBNOSTI O STROJU Električni podatki Nazivna napetost: 3/N/PE/400 V Nazivni tok: 11 A Nazivna moč: 4,7 kW Frekvenca: 50 Hz Gsdsxnyg Rspfx Ab Touk OPREMA Vertikalni in horizontalni pritiskalni nosilci z elektromehanskim pomikom Ustvarjanje pritiska prek frekvenčno vodenih zobniških motorjev Pritisk stiskanja vertikalno in horizontalno nastavljiv ločeno Čas stiskanja nastavljiv

Stanje: dober (rabljeno), Leto izdelave: 2014, Rabljena stiskalnica za korpuse Gujdpfoxhc T Tex Ab Tjk - GANNOMAT Concept 70 Eco - Leto izdelave: 2014 - Na voljo december 2025

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Gjdpfx Aoxgvwpsb Teuk Proizvajalec: Hess Tip: Export Velikost korpusa: maks. 2.500 x 1.500 mm Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, manometer in oljna megla, anodizirane merilne letve, snemljive noge Lokacija: pri stranki - takoj na voljo -

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LGMATECH KORPUSSPRESSE, Tisk za karoserijo v takoj uporabi sposobnem stanju. Tiskalnik si je mogoče ogledati kadarkoli po predhodnem dogovoru. Guedpfx Abjxf Dvws Tok

Stanje: rabljeno, Leto izdelave: 1982, Dimenzije stiskalnice: 3500 x 2600 mm Elektrohidravlična naprava za 4 popolne izvrtine za skodelične spone, 4 naprave za vrtanje skodeličnih spon Levi zgornji kotni plošček z 2 prečnima tlačnima valjema 4x hidravlični leseni nosilci Vmesni vložki za manjše stiskanje z vrtalno napravo Srednji tlačni nosilec 2600 mm Dolžinski tlačni valj s protioporo 4x vrtalniki za skodelične spone Lokacija skladiščenja: pri stranki Gjdpfx Asxftcaeb Tsuk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, LAMELLA - CORPUS PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lamella pressing beam, TOP with 6 elements, lamella pressing beam, SIDE with 5 elements - Lamella pressing beams featuring the proven tolerance compensation system (Ganner System) for tightly compressed carcass joints - Counterpressure surfaces (side pressure wall, base) are 38 mm thick, laminated, continuous support plates - Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam - Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance carrier nuts with grease reservoir - Pressing is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressing beams is infinitely variable and electronically adjustable via 2 potentiometers and regulated by a frequency converter, making the pressing force control completely wear-free - Pressing force for the horizontal pressing beam: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg); Pressing force for the vertical pressing beam: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/feeding height: 300 mm Gsdpfxjw Td A Io Ab Touk - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, LAMELLA/CASE CLAMP GANNOMAT "CONCEPT 70 ECO" complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates, 40 mm thick Gusdpfxsw Tdyms Ab Tek - Electromechanical adjustment of both pressing beams via precision trapezoidal-threaded spindles (with increased pitch and runout accuracy) and high-performance lead nuts with grease reservoirs - Pressing is performed electromechanically, by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force 2000 daN (kg) per pressing beam - The pressing force of the pressing beam is electronically controlled and adjustable via frequency converter, making torque transmission completely wear-free - Pressing and adjustment speed: 25 mm/sec - Extremely simple operation via 6 separate push buttons, 6 movement sequences selectable through the control unit - Freely adjustable pressing time pre-selection with automatic opening, 0-30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Used machine: Year of manufacture 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Pnevmatska spona za pohištvo. Uporabne dimenzije: 3000x1200 mm. Motorizirano dvigovanje zgornje letve. Preizkušeno in deluje. Gjdpfx Abjw S A Ero Tsuk

Stanje: novo, Leto izdelave: 2025, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir Gusdpfxjw Sgnke Ab Tok - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: rabljeno, Leto izdelave: 1999, skupna višina: 2.200 mm, skupna dolžina: 5.200 mm, skupna širina: 800 mm, Lastna teža: 950 kg - Leto izdelave: 1999 - Dokumentacija na voljo: Ne - CE certifikat priložen: Ne - Serijska številka: 13301 - Pogon stiskalnice: Pnevmatski - Največja širina obdelovanca [mm]: 4500 - Največja višina obdelovanca [mm]: 1550 - Največja globina obdelovanca [mm]: 600 - Vertikalni stiskalni bati [kos]: 3 - Horizontalni stiskalni bati [kos]: 4 - Transportne mere: 5200 mm x 800 mm x 2200 mm (d x š x v) - Transportna teža [kg]: 950 kg - Transportna pakiranja [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/Odbitek: DDV je odbiten za podjetja Dostava in odkup možna kadar koli za celotno področje industrije Yorick Diebels Guedpfx Abswyn Nao Tok

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, complete in standard configuration with: - Stable, torsion-free steel frame in welded and bolted construction - Side-mounted press beam with continuous pressure surface and 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous support plates, 25 mm thick and coated - Electromechanical adjustment of the press beam via precision trapezoidal lead screws (with enhanced pitch and concentricity accuracy) and high-performance running nuts with grease reservoir - Pressing action via geared worm drive electric motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically by potentiometer and controlled via frequency inverter, providing absolutely wear-free press force regulation - Pressing force for vertical press beam: min. 300 daN (kg), stepless up to max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-stage selector switch: 5 / 10 / 25 mm/second - User-friendly operation via 2 separate pushbuttons; 2 movement cycles (open/close) selectable via control system - Freely adjustable press time preselection with automatic opening 0-30 min. (switchable to seconds or hours) - Working height/loading height: 200 mm Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Godpfewx Nfgex Ab Tjuk Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 630 mm, vrsta nastavitve višine: mehanski, skupna masa: 1.100 kg, višina skobljanja: 200 mm, delovna širina: 630 mm, največja hitrost vrtenja: 5.500 obr/min, Thickness planer Manufacturer: Dornburg Model: DD 63 Gedpfx Abswtqzre Touk Robust thickness planer (cast iron), table length approx. 1050 mm Planing width approx. 630 mm Maximum workpiece height: 200 mm Cutterblock equipped with 4 strip planer knives Motor: 5.5 kW Speed: 5500 rpm Feed rate: 18 m/min Dimensions approx. 1100 x 1300 x 1600 mm (LxWxH) Weight approx. 1100 kg

Stanje: zelo dobro (rabljeno), Italpresse Program/30 Hydraulic Assembly Press for Window and Door Joinery The Italpresse Program/30 is a vertical hydraulic press designed for the precise assembly and gluing of wooden components such as window frames, door frames, and furniture carcasses. Its construction allows for accurate alignment and durable bonding of components, which is crucial for the production of joinery and furniture elements. Technical specifications • Maximum working dimensions: 3000 × 1700 mm • Vertical cylinder stroke: 800 mm • Horizontal cylinder stroke: 1200 mm • Adjustable lower beam: three-position setting • Hydraulic cylinders: • 2 vertical (Ø 100/60 mm) • 2 horizontal for frame positioning (Ø 50/35 mm) Guedjwkf Stspfx Ab Tok • Hydraulic unit power: 2.2 kW • Overall dimensions: 3600 × 1000 × 2650 mm • Weight: approx. 1200 kg Applications The Italpresse Program/30 is ideal for: • Gluing and assembly of window and door frames • Assembling furniture carcasses • Mounting wooden panels and other building joinery components

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Gannomat Concept 70 Eco Carcass Press Year of manufacture: 2025 including the following options: - Rapid traverse motion speed adjustment up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Pressing force min. 300/500 daN (kg) on Concept Eco, Pressing force min. 600/800 daN (kg) on Concept Primus • Pressing force max. 2200 daN (kg) on Concept Eco, Pressing force max. 3500 daN (kg) on Concept Primus • Three pressing and motion speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Very simple operation using 6 separate pushbuttons for 8 movement functions • Concept Primus: Very simple operation via LCD display Universal applications: • Cabinets, e.g. for furniture and wardrobes • Mitre carcasses • Carcasses with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple carcasses / drawers Gsdpfx Abovxgrro Tjuk Advantages: • Industry-proven tolerance compensation (GANNOMAT system) • Electromechanical carcass press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to proven, high-quality components • Solid and robust construction • Space-saving design • Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple due to user-friendly, practical control panel • Fast due to positioning speed of pressure beams up to 50 mm/sec (option) • Efficient through precise pressing of various carcass sizes • Flexible thanks to adjustable parameters like pressing force, pressing time, and motion speed • Precise due to angle-accurate pressing of furniture carcasses and drawers • Professional production of carcasses and drawers with a modern carcass press

Stanje: dober (rabljeno), Koda: 0024 Znamka: ITALPRESSE Model: NUOVO/SP Hitronastavljiva polavtomatska stiskalnica za okvirje Tehnični podatki Ročno nalaganje Maksimalne uporabne dimenzije: 2500 x 600 x 1250 mm Minimalne uporabne dimenzije: 250 x 600 x 280 mm Motorno vodoravno prečno vodilo z zaslonom Nastavitev vertikalnega nosilca Gedpovv Ul Ujfx Ab Tsuk Število vertikalnih cilindrov: 6 Število horizontalnih cilindrov: 6 Hod cilindrov: 70 mm Hod prečnega nosilca: 920 mm Vgrajena moč: 0,55 kW Skupne dimenzije: 3600 x 800 x 2550 mm (VxŠxG) Teža: 1400 kg

Stanje: rabljeno, Leto izdelave: 1992, Mere: 5700 x 1300 x 2400 mm Gusdpfjvvkl Dsx Ab Tok Skladišče: Nattheim

Stanje: dober (rabljeno), ZIM Hülsta Carcase Press NOW Easy Manufacturer: ZIM Hülsta-Werke Model: NOW Easy Serial no.: 380125028 Maximum carcase size: 260 x 1100 mm 2 adjustable lower supports 2 adjustable upper press beams Beckhoff control panel Roller conveyor: 4500 x 600 mm Roller width: 500 mm Overall dimensions (W x D x H): 3300 x 1800 x 3600 mm You will find more new and used items in our shop! Guedpfevdbv Aex Ab Tok International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 2024, številka stroja/vozila: 1300.448, New demonstration machine! List price: €32,665 Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, continuously laminated, coated support plates - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir - Pressing is performed electrically via 2 separate worm-geared motors (2 x 0.75 kW) - The pressing force of the pressing beams can be infinitely electronically adjusted by 2 potentiometers and regulated via a frequency converter, resulting in completely wear-free force regulation - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for vertical pressing beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) Godpfxjuf Hx Ho Ab Tsuk - Press and adjustment speed of the pressing beams with fine positioning, selectable via 3-stage switch: 5 / 10 / 25 mm/second - Simple operation via 6 separate push-buttons, 8 movement sequences selectable via the control system - Freely adjustable pressing time preselection with automatic opening 0-30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Weight: approx. 1800 kg net - Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Optional equipment: - Rapid traverse speed for fast positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5 / 10 / 25 mm/sec, rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - 1 set of machine feet (working height 500 mm)

Stanje: rabljeno, Length: 2,300 mm Gedpfst H Tuxjx Ab Teuk Width: 800 mm Height: 2,700 mm Workpiece size: max. 130 x 70 x 145 cm Pneumatic carcass press or gluing press for pressing cabinet carcasses or similar items.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Gannomat Mod. 260 Case Clamp Clamping capacity: 2500 x 1250 x 650 mm Working pressure: 0–10 bar Cylinder stroke: 110 mm Space requirements: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 Gedorfbnbopfx Ab Touk CE compliant The machine is currently being reconditioned; additional pictures will follow shortly.

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0243 / 25634, skupna višina: 2.600 mm, skupna dolžina: 100.000 mm, skupna širina: 1.000 mm, stiskalna sila: 120 t, Ocmac Automatic Throughfeed Case Clamp KOPR CC-EL Manufacturer: OCMAC s.p.a. Italy (ACIMALL) S/N 0243 / 25634 Year of Manufacture: 1995 Hydraulic, self-adjusting electronic case clamp for the assembly of furniture components. Automatic infeed of workpieces. Technical Data: Maximum usable dimensions: Length: 2300 mm Width: 600 mm Height: 1500 mm Minimum usable dimensions: Length: 500 mm Width: 300 mm Height: 200 mm Feed rate of conveyor belt: 2.4–12 m/min Closing time of press: 20–40 seconds Installed power: 11.5 kW Maximum pressure: 120 bar Guedpeqai H Tjfx Ab Tjk Voltage: 380 V, 50 Hz Net weight: 4,500 kg