Dbt Engineering Group Llp

Stanje: novo, Leto izdelave: 2025, Pressure: 1000 t Upright Distance: 4250 mm Ncedpfx Aoym D E Aofgsp Stroke: 400 mm Control: SIEMENS S7-1500F Table Dimensions (longitudinal): 4000 mm Table Dimensions (transverse): 1600 mm Total Power Requirement: 200 kW Machine Weight: approx. 250 t Space Requirement: approx. 7.5 x 4.8 x 7.4 m This new FAGOR TSE2-1000-4000-1600 transfer press is available IMMEDIATELY! DESCRIPTION: New transfer press! Stored and has never been installed. COMPLETE with electronic beam transfer 0 – 800 mm transfer stroke and 500–1300 mm distance between transfer beams. Lifting stroke = 0–150 mm. 2 x T-slot sliding tables, extendable. Maximum total tool weight: 20,000 kg, upper part max. 10,000 kg. Ram weight compensation via pneumatic cylinder. Automatic pressure adjustment with setpoint specification from the tool memory. Lubrication: Main bearings, gears are continuously supplied by the recirculating lubrication system. LED tool area lighting. 2 auxiliary control panels, scrap chute baffles, press force measuring device, vibration elements by KTI. Technical Data: Frame design: Transfer press Drive type: Mechanical Side window in frame: Yes Drop-through hole in table: Yes Sliding table: Yes Number of tables: 2 Press Forces Rated press force: 1000 t Press Table Clamping surface (left-right): 4000 mm Clamping surface (front-back): 1600 mm Height above floor: 600 mm automatic tool clamping system: Yes Ram Stroke: 400 mm Ram (mechanical press) Ram adjustability: 300 mm Strokes per minute: min. 8 /min Strokes per minute: max. 50 /min Hydraulic overload protection: Yes Tool Installation Dimensions Die installation height (stroke down, adjustment): 766 mm Distance between uprights (left-right): 4250 mm Free lateral passage (width): 1800 mm Maximum tool weight: 20,000 kg Transfer System Gripper rail inside width closed max.: 500 mm Gripper rail inside width open max.: 1300 mm Electrical Connection Data Total power consumption: 200 kW Connected load: 350 kVA Connection voltage: 400 V Mains frequency: 60 Hz Dimensions / Weights Space requirement length: 7500 mm Space requirement width: 4800 mm Height above floor: 7360 mm Height below floor: 4000 mm Total weight: approx. 250,000 kg Additional Equipment for Presses Light curtain: Yes Shear shock damping: Yes automatic tool clamping system: Yes Hydraulic overload protection: Yes Transfer unit: Yes

Stanje: rabljeno, Leto izdelave: 2005, Fabricante: ARISA, Tipo: LD8-4-2000-470-230-LDE, Año de fabricación: 2005, Nº de serie: 820016341, Control de prensa, Fabr.: Siemens, Tipo: Sinumerik 840D, Fuerza de prensado: 1.800 t, Superficie de sujeción de la mesa: 4.500 x 2.300 mm, Superficie de sujeción del carro: 4.500 x 2.300 mm, Carrera del carro: 750 mm, Ajuste del carro: 400 mm, Altura de instalación mín.: 900 mm, Altura de instalación máx.: 1.300 mm, Número de golpes: 8 - 24 golpes/min, Fuerza del cojín de mesa: 2x 300 - 200 t, Carrera del cojín de mesa: 250 mm, Fuerza del cojín del carro: 2x 5 - 55 t, Carrera del cojín del carro: 150 mm, Línea de banda, Peso máx. bobina: 25 t, Ancho de bobina: 300 - 1.800 mm, Espesor chapa: 0,5 - 3,0 mm, compuesta por desenrollador y carro de carga, enderezadora, estación de engrase, sistema de transferencia, armarios de control y mando, plataforma con escalera, cinta transportadora L 10.000 mm, banco de trabajo con armarios bajos y tornillo de banco, puesto de control de calidad Ncjdpex Ry Dqofx Afgep +++ Atención: ¡La máquina forma parte de una subasta online! +++

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: Stamping force: 500 kN Shearing force: 9.0 t Control: Siemens Touch Panel S7 Ram adjustment: 80 mm Fixed ram stroke: 170 mm Stroke rate: 20 – 120 strokes/min Frame width: 1140 mm Shut height: 350 – 430 mm Lateral frame opening: 315 mm Table area (L x W): 1100 x 400 mm Ram area (L x W): 1100 x 400 mm Through-hole in table: 950 x 100 mm Table height above floor: 1100 mm Lateral frame passage: 315 mm Drive power AC: 230 VAC/24 VDC kW Operating pressure: 6 bar Operating hours: Machine 1: 6654 h Operating hours: Machine 2: 5970 h Total power requirement: approx. 30 kW per machine Machine weight approx.: 9.5 t per machine 2 mechanical transfer presses – PRESS LINE in automated operation. This transfer press line is currently set up for the production of vehicle sockets / electrical sockets. Ncedpfx Aou Nfttofgep System equipped with: 1. Decoiler* PM245, with loop control, coil weight 2 t, coil width up to 450 mm 2. Servo feeder (roller feed) with 2 axes (transverse and longitudinal) 3. Press 1: Deep drawing press with five pneumatic ejectors (individually adjustable and expandable) 4. Feeding unit by Püschel conveyor system, drum vibratory feeder, linear vibratory feeder, capacity up to 100 parts/minute, belt oscillating conveyor for discharging deep drawn parts / transfer via steep conveyor into peat oscillating conveyor / transfer into entry of the punching press via mechanical vibratory feed rails 5. Punching press 2 (prepared for ejectors) Various safety fences, protections, safety switches, monitoring systems (Pilz PLC), adapted to machinery directives Optional: 1 unused spare flywheel gearbox Optional: Complete tool kit* for the production of vehicle sockets (e.g. for cigarette lighters or electrical devices) including full technology and technical drawings (DXF) *

Stanje: dober (rabljeno), Pressa da 100 tonnellate. Numero di punti di spinta: 2 Corsa: 110 mm Regolazione della slitta: 80 mm Dimensioni tavola pressa: 1.200 x 600 mm Luce laterale: 460 mm Colpi al minuto: 40–180 Luce tra i montanti: 460 mm Transfer DGM Njdpfx Afeq N Et Nogscp

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally configured as an automatic transfer press, it was converted to manual operation in 2012 but can be retrofitted for automatic operation again. The press is still assembled, powered, and in very good condition. Pressing force: 200 t Oil capacity: 1,100 liters Stroke: 300 mm Table dimensions (L x W): 600 x 600 mm Installation space: 1,000 mm Njdpfx Ajhtaaqofgjcp Upper ejector stroke: 25 mm Upper ejector force: 10 t Total weight: 12,000 kg Operating pressure: 6 bar Rapid approach/descent speed: 375 mm/sec Working speed: 18 - 40 mm/sec.

Stanje: novo, New transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will create an attractive offer including installation and service. ISGEC has supplied to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your inquiry. Nedpfxjf Rt Ubj Afgscp