Hidravlična prenosna stiskalnica

SACK & KIESSELBACH TRP 200

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally designed as an automatic transfer press, the machine was converted to manual operation in 2012, but can be retrofitted for automatic mode. The press is currently assembled, powered, and in very good condition. Year of manufacture: 2001 Press force in t: 200 Oil capacity in liters: 1100 Stroke in mm: 300 Table dimensions (LxW) in mm: 600 x 600 Installation space in mm: 1000 Dwodehfwqzepfx Apwec Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Rapid approach speed in mm/sec: 375 Working speed in mm/sec: 18 - 40

Stanje: dober (rabljeno), Leto izdelave: 1998, Press force: 315.00 t Stroke: 500 mm Throat: 425 mm Daylight (table to ram, stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Speed up: 330 mm/s Working speed: 19 mm/s Oil volume: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Dwodpfx Apev Rwu Uowec Permitted for manual loading according to CE standard. Equipped with oil-hydraulic drive, controllable dependent on pressure/time and stroke, front light curtain (Sick), two-hand operation.

Stanje: zelo dobro (rabljeno), Prodam ta stroj, priključen, možno preizkusiti. Maks. premer obdelovanca ..... 1600 mm Modul ..... 16 - Moč glavnega elektromotorja ..... 12 kW Dimenzije d x š x v ..... 4300 x 2000 x 3170 mm Teža stroja ..... 18500 kg Video stroja lahko pošljem preko aplikacije WhatsApp. Dwodpov Nqppefx Apwsc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 Djdpfew T Tcwox Apwjwc - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Dwjdpfor A Hcbex Apwoc Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna širina: 5.800 mm, skupna višina: 4.500 mm, skupna dolžina: 13.500 mm, dolžina mize: 10.000 mm, širina mize: 1.250 mm, Travelling column – high performance, precision, and metal removal capacity Linear RAM guide combined with HDS hydrostatic guidance ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with high-pressure coolant (IKZ) 15 bar Chip conveyor BLUM 3D touch probe Wide bed, linear guided in X-axis, traverse path W = 930 mm Rotary table drive prepared in control cabinet X-axis: 8,000 mm Y-axis: 1,300 mm Z-axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: 40 ISO/Bt/Mk X-axis feed: 35,000 mm/min Y-axis feed: 40,000 mm/min Z-axis feed: 40,000 mm/min Milling head auto-index: 0.001 x 0.001 degrees Operating hours: 3,800 h Length: 13,500 mm Djdpeyr Dmdofx Apwswc Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual conditions are implied. We recommend verifying all critical details.

Stanje: novo, New transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will create an attractive offer including installation and service. ISGEC has supplied to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your inquiry. Dwedef Rt Ubepfx Apwjc

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 18891, Tractive force: 10 t. Lift: 1000 mm Dwsdsbrcmkspfx Apwsc 3 clearing stations With chip conveyor + platform for above-floor installation and safety door.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Offered is a double-spindle pick-up lathe EMAG VSC 500 DUO. The machine is equipped with 2 independent work spindles and 2 EMAG turrets. Dodpfx Ajt Du Tdspwjwc The machine allows for either simultaneous machining of 2 identical workpieces with the same operation, or sequential machining of one workpiece in two consecutive processes. Depending on requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL SYSTEM Siemens 840 Dsl TECHNICAL DATA Workpiece diameter: max. 440 mm Workpiece height: max. 250 mm Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm TOOL CARRIERS 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: rabljeno, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture 1986 - rebuilt in 2000 Pressing force: 200 tons Frame opening (front): 2050 mm Frame passage (side): 2030 mm Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid approach speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Mains connection: 380 Volt, 50 Hz - 8-way flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in upper dead center - Position measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - 2-hand control panel, free-standing - Floor-level installation - Central lubrication - Operating manual with circuit diagrams Space required for press (upright), L x W x H: 3700 x 2900 x 5900 mm Overall machine height with motor: 5900 mm Space required for horizontal transport, L x W x H: 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Dwodpfx Apjdzp Tcowjc Good condition.