Prenosna stiskalnica

RAVNE SC2-100

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) Ffsdpfofxyhfex Abvsw - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: dober (rabljeno), Technical Data: Ffodpjwkaalofx Abvew Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum pre-bending: 4.0 mm Upper roll diameter: 210 mm Diameter of lateral lower rolls: 210 mm Diameter of central lower roll: 210 mm Conical bending device via tilting of both side rolls Hydraulic drop-end bearings Swiveling control panel with digital display Dimensions (L x W x H): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's condition in terms of appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 5.277 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, teža obdelovanca (maks.): 300 kg, širina mize: 500 mm, dolžina mize: 630 mm, skupna masa: 8.500 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 22.400 W, nos vretena: CT 40, število mest v zalogovniku orodij: 40, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, CNC obdelovalni center HAAS UMC 750 SS TEHNIČNE LASTNOSTI: Leto izdelave: 2019 Število sočasnih osi: 5 Pomik osi X: 762 [mm] Pomik osi Y: 508 [mm] Pomik osi Z: 508 [mm] Kotna pomik osi C: 360 [°] Dimenzije mize: Ø630 x 500 [mm] Maksimalna obremenitev mize: 300 [kg] Zasuk osi B: +110 [°] / 350 [°] Vrsta vretena: CT 40 Maksimalna hitrost vretena: 15.000 [rpm] Ffedpfx Abex Nf Tbsvew Moč vretena: 22,4 [kW] Število orodij v menjalcu: 40 Kapaciteta rezervoarja za mazanje: 284 [l] Število delovnih ur: 5.277 [h] Teža: 8.500 [kg] OPREMA VKLJUČENA: x1 vreteno 15.000 [rpm] x1 hlajenje skozi vreteno x1 visokotlačna črpalka za hladilno sredstvo 21 bar x1 pomožni filter za hladilno sredstvo x1 brezžična merilna sonda za obdelovanec RENISHAW x1 kalibracijska krogla x1 merilna sonda za orodje RENISHAW x1 odstranjevalec oljne megle HAAS x1 ročno upravljalno kolo HAAS x1 transporter odrezkov HENNIG, tip 101435 Stroj je pod napetostjo na naši lokaciji, ogled možen po dogovoru. Cena po dogovoru, nakladanje na tovornjak je vključeno. Možna dostava po celem svetu. Podatki na tej strani so bili pridobljeni po naših najboljših močeh, zato točnost ne more biti zagotovljena. Stroj je primerljiv z Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, ter z rezkalnimi, vrtalnimi in navojnim stroji kot tudi CNC brusilnimi stroji.

Stanje: rabljeno, številka stroja/vozila: 4131, Comm. No. Lg 34422 High-performance punching press BRUDERER BSTA 60 H From ongoing production. Stroke adjustment requires repair. Without soundproof enclosure and without strip feeding line. Feeder BBV 202/120 Ffedpoinzdljfx Abvow

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Pressing force: 3,600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6,120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (LxWxH): 1,300 mm x 2,000 mm x 2,230 mm, Weight: approx. 6,300 kg. Ffedpfx Abor A Eifevew

Leto izdelave: 2003, stanje: rabljeno, Pressure: 100 t Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Ram adjustment: 100 mm Table area: 950 x 660 mm Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Ffodpfx Abera Rr Eevow Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Fsdpfxecxxx Ro Abvefw Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, x-hod 1000 mm y-hod 550 mm z-hod 500 mm CNC-krmiljenje Fanuc Oi-MD Velikost mize 1.100 x 500 mm maks. obremenitev mize 700 kg Vpenjalni stožec ISO BT-40 Hitrost vretena 10.000 min⁻¹ Podajalna hitrost brezstopenjsko 24.000 mm/min Hitri pomik 36/36/30 m/min Pogonska moč - motor vretena 15/11 kW Menjalec orodij 24 Hladilni sistem IKZ 20 bar Obratovalna napetost 400 V Fodpexvdtwofx Abvefw Skupna priključna moč 30 kVA Teža stroja cca 6,5 t Prostorske zahteve cca 3,35 x 2,20 x 2,67 m Transportni trak za odrezke 2,40 x 1,50 x 1,40 m Filtrirna naprava 0,90 x 1,40 x 1,30 m Transformator 0,60 x 0,55 x 0,55 m - Serijska št.: M281361B5N D - Delovni čas stroja: 21.011 h - z NC-delnim aparat KITAGAWA (klic preko M-ukaza) - Krmiljenje: FANUC Oi-MD - IKZ 20 bar - Transportni trak za odrezke

Stanje: pripravljen za uporabo (rabljen), Oprema obsega: - 3 odvijalce Elba s kapaciteto 5 ton - 1500 mm - Ravnalo RAS 26.45 - Enota za izsekavanje vogalov Ras - Hidravlična enota Ras za valjanje ojačitvenih reber v pločevini - Škarje Ras za rezanje na dolžino RAS 82.16 - Upogibni stroj Ras hitrost: 15 m/min Moč: 16 kW Ffjdpfxowwbf Ns Abvsw

Stanje: rabljeno, Centre height: 102 mm Centre distance: 450 mm Ffsdewbi Hpjpfx Abvow Spindle bore: 25 mm Spindle speed: 220 - 2600 rpm Accessories have not been checked for completeness Cabinets are not included in the scope of delivery.